|
AVO410
|
AVO410 Digital multimeter CATIV 600V (1000V CAT III) |
$250.00
|
Add to Cart Request Quote
|
|
AVO830 |
AVO830 Professional CAT IV 600V Digital multimeter with Phase rotation |
N/A |
Discontinued |
|
AVO835 |
AVO835 Professional CATIII 1000V / CAT IV 600V Digital multimeter with Phase rotation and temperature measurement |
N/A |
Discontinued |
|
AVO850
|
AVO850 CAT III/CAT IV BT TRMS Multimeter |
$576.00
|
Add to Cart Request Quote
|
|
BD-90002
|
MOM2 Calibration kit |
$1,030.00
|
Add to Cart Request Quote
|
|
BI-10004
|
AMP/Burndy Lead Set for BITE 3 |
|
Request Quote
|
|
BI-10005
|
Kelvin Clip Lead Set for BITE 3 |
$335.00
|
Add to Cart Request Quote
|
|
BI-10006
|
Quick Disconnect Lead Set |
|
Request Quote
|
|
BI-10017
|
Tip Kit for BITE 3 |
$64.00
|
Add to Cart Request Quote
|
|
BITE 3 |
BITE 3 Standard Kit 50Hz and 60Hz Battery Impedance Test Equipment |
N/A |
Discontinued |
|
BITE2
|
Battery Impedance Tester, 120V, 60Hz |
$11,000.00
|
Add to Cart Request Quote
|
|
BITE2P
|
Battery Impedance Tester with Built-in Printer, 120V, 60Hz |
$12,485.00
|
Add to Cart Request Quote
|
|
BITE3T |
Battery Impedance Tester with TC3231 Thermal Camera |
N/A |
Discontinued |
|
BITE5
|
Battery Tester |
$3,825.00
|
Add to Cart Request Quote
|
|
BITE5-ADV
|
The BITE5 Advanced is a battery tester that will test a wide variety of batteries. It will measure and record battery voltage, impedance, temperature and inter-cell connections. |
$6,850.00
|
Add to Cart Request Quote
|
|
BM15 |
BM15 Megohm Meter Insulation Tester - Battery Powered 500 V/1 kV/2,5 kV/5 kV analog |
N/A |
Discontinued |
|
BM5200
|
BM5200 5kV Insulation Tester Contractor |
$2,065.00
|
Add to Cart Request Quote
|
|
BT51 |
BT51 DLRO 120V With DH1-C |
N/A |
Discontinued Replaced by: DLRO2 |
|
BT51/120 |
Digital Low Resistance Ohmmeter, 10 uOhm - 2 Ohm (2 A) Digital - 120V |
N/A |
Discontinued |
|
C900-PD Scan
|
External TEV Sensor for PD localisation |
$230.00
|
Add to Cart Request Quote
|
|
CA-PA9-JMP-KIT
|
Set of 3 white jumper leads used to jump neutral connections together on the MPQ-2000 and PA-9 Series units. |
$80.00
|
Add to Cart Request Quote
|
|
CA-USB
|
USB 2.0 cable for connection to PC.(For MPQ Series) |
$17.00
|
Add to Cart Request Quote
|
|
CB101
|
Calibration Check Box up to 5kV |
$575.00
|
Add to Cart Request Quote
|
|
CERT-NIST
|
Certificate of Calibration - Ordered with instrument |
$580.00
|
Add to Cart Request Quote
|
|
CFL510G
|
TDR1000/3 Handheld Cable Fault Locator (Time Domain Reflectometer) Fast Pulse (2ns) Range (5km) with Bed of Nails Test Leadset and BNC Adapter (for US market) |
$2,770.00
|
Add to Cart Request Quote
|
|
CFL535G
|
Compact Cable Fault Locator (Time Domain Reflectometer), Dual Channel - US |
$4,640.00
|
Add to Cart Request Quote
|
|
CHM2000
|
Telecom Cable Height Meter; 6 Lines; 35 ft. |
$1,120.00
|
Add to Cart Request Quote
|
|
CHM600
|
Power Cable Height Meter; 6 Lines; 50 ft. |
$1,325.00
|
Add to Cart Request Quote
|
|
CHM600E
|
Power Cable Height Meter; 6 Lines; 75 ft. |
$1,510.00
|
Add to Cart Request Quote
|
|
CP1000-WCE-ID
|
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 1000A range. (Cable to instrument 1.82m/6ft) |
$840.00
|
Add to Cart Request Quote
|
|
CP-1000WCE-ID-KIT
|
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Support 1000A range. 6" (1.82m) Cord; Set of 4 |
$2,650.00
|
Add to Cart Request Quote
|
|
CP-100CE-ID |
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 100A range. (Cable to instrument 1.82m/6ft) |
N/A |
Discontinued |
|
CP-100CE-ID-KIT |
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Support 100A range. 6" (1.82m) Cord; Set of 4 |
N/A |
Discontinued |
|
CP100-CP-100CE-ID |
Split core current clamp 100A range self identifying CT |
N/A |
Discontinued |
|
CP1-C
|
CP1-C Concentric Probe-Connect (x1) Probe Only - No Lead (Also connects to BT51) |
$195.00
|
Add to Cart Request Quote
|
|
CP-20CE-ID
|
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 20A range. (Cable to instrument 1.82m/6ft) |
$535.00
|
Add to Cart Request Quote
|
|
CP-20CE-ID-KIT
|
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Support 20A range. 6" (1.82m) Cord; Set of 4 |
$2,040.00
|
Add to Cart Request Quote
|
|
CP-5-CE-ID
|
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 5A range. (Cable to instrument 1.82m/6ft) |
$695.00
|
Add to Cart Request Quote
|
|
CP-5CE-ID-KIT
|
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Support 5A range. 6" (1.82m) Cord; Set of 4 |
$2,510.00
|
Add to Cart Request Quote
|
|
CP-600DC-ID
|
High Bandwidth AC/DC Hall Effect current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 600Adc and 400Aac ranges. (Cable to instrument 1.82m/6ft) |
$1,225.00
|
Add to Cart Request Quote
|
|
CP-600DC-ID-KIT
|
Hall Effect current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Support 600Adc and 400Aac range. 6" (1.82m) Cord; Set of 3 |
$3,605.00
|
Add to Cart Request Quote
|
|
DCM1500
|
1500A a.c. And d.c. Clampmeter w/ V; Ohms And Hz |
$495.00
|
Add to Cart Request Quote
|
|
DCM1500S
|
DCM1500S Solar PV Clamp meter |
$585.00
|
Add to Cart Request Quote
|
|
DCM300E
|
0,01 mA - 300 A for Earth Leakage, digital, AC only |
$585.00
|
Add to Cart Request Quote
|
|
DCM305E
|
0,001 mA - 100 A True RMS Earth Leakage Clamp Meter, Digital, AC only with Low Pass Filter 50Hz/60Hz |
$345.00
|
Add to Cart Request Quote
|
|
DCM310
|
400A AC Digital Clamp meter; current only |
$93.00
|
Add to Cart Request Quote
|
|
DCM320
|
400A AC Digital Clamp meter; 600V; 20Megohm |
$135.00
|
Add to Cart Request Quote
|
|
DCM330
|
200 A AC, 1000 V, 20 Mohm Fork multimeter |
$170.00
|
Add to Cart Request Quote
|
|
DCM340
|
600A a.c. And d.c. Clampmeter w/ V; Ohms And Hz |
$250.00
|
Add to Cart Request Quote
|
|
DET14C |
DET14C Clamp-on Earth Tester |
N/A |
Discontinued |
|
DET2/3
|
DET2/3 Earth Tester, 0.001 Ohm to 20 kOhm, Memory Storage and USB Download + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian |
$6,560.00
|
Add to Cart Request Quote
|
|
DET2/3 KIT 165FT
|
DET2/3 Earth Tester, 0.001 Ohm to 20 kOhm, Memory Storage and USB Download + ETK50C, Test Kit with 50m reels, spikes, clamps + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian |
$7,595.00
|
Add to Cart Request Quote
|
|
DET2/3 KIT 330FT
|
DET2/3 Earth Tester, 0.001 Ohm to 20 kOhm, Memory Storage and USB Download + ETK100C, Test Kit with 100m reels, spikes, clamps + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian |
$7,705.00
|
Add to Cart Request Quote
|
|
DET2/3-OB |
DET2/3 Earth Tester, 0.001 Ohm to 20 kOhm, Memory Storage and USB Download + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian |
N/A |
Discontinued Replaced by: DET2/3 |
|
DET24C
|
DET24C Bluetooth Clamp-on Earth Tester |
$2,480.00
|
Add to Cart Request Quote
|
|
DET3TC
|
DET3TC Digital Earth Tester 2 And 3 terminal earth tester, with Hard Case and, Stake and Wire Kit, ART compatible |
$1,475.00
|
Add to Cart Request Quote
|
|
DET3TD
|
DET3TD Digital Earth Tester 2 And 3 terminal, with case and kit |
$1,300.00
|
Add to Cart Request Quote
|
|
DET4TC2
|
DET4TC2 Digital Earth Tester - 2, 3 And 4 Terminal - Clamp Ready (Not Included), with Case, Basic Lead and Spike Kit, and Terminal Bare Wire Adaptors. |
$2,690.00
|
Add to Cart Request Quote
|
|
DET4TC2 + Clamps
|
DET4TC2 Digital Earth Tester - 2, 3 And 4 Terminal - I Clamp (For ART Testing) and V Clamp (For Stake less Testing) included, with Case, Basic Lead and Spike Kit, and Terminal Bare Wire Adaptors. |
$3,745.00
|
Add to Cart Request Quote
|
|
DET4TC2 + ETK50C
|
Resistance Tester with Cable Reel Kit |
$2,900.00
|
Add to Cart Request Quote
|
|
DET4TCR2
|
DET4TCR2 Digital Earth Tester - 2, 3 And 4 Terminal - Clamp Ready (Not Included), Rechargeable, Digital Display with Case, Basic Lead and Spike Kit, and Terminal Bare Wire Adaptors. |
$2,885.00
|
Add to Cart Request Quote
|
|
DET4TCR2 + Clamps
|
DET4TCR2 Digital Earth Tester - 2, 3 And 4 Terminal - I Clamp (For ART Testing) and V Clamp (For Stake less Testing) included, Rechargeable, Digital Display with Case, Basic Lead and Spike Kit, and Terminal Bare Wire Adaptors. |
$4,205.00
|
Add to Cart Request Quote
|
|
DET4TCR2 + ETK50C
|
Resistance Tester with Rechargeable Batteries Cable Reel Kit |
$3,225.00
|
Add to Cart Request Quote
|
|
DET4TD2
|
Digital Earth Tester - 2, 3 And 4 Terminal, with Case, Basic Lead and Spike Kit, and Terminal Bare Wire Adaptors. |
$2,135.00
|
Add to Cart Request Quote
|
|
DET4TR2
|
DET4TR2 Digital Earth Tester - 2, 3 And 4 Terminal, Rechargeable, Digital Display with Case, Basic Lead and Spike Kit, and Terminal Bare Wire Adaptors. |
$2,545.00
|
Add to Cart Request Quote
|
|
DH1-C
|
3M Duplex Handspike lead set, with connect (x2) |
$505.00
|
Add to Cart Request Quote
|
|
DH2-C
|
DH2-C Connect Duplex Handspike 6m (x1) Complete Duplex Lead Set |
$310.00
|
Add to Cart Request Quote
|
|
DH4
|
DH4 1.2m Duplex Handspikes (2 off), one with indicator lights |
$675.00
|
Add to Cart Request Quote
|
|
DH4-C
|
DH4-C Connect Duplex Handspike 1.5m (x2) Complete Duplex Lead Set, includes part numbers 1007-789 and 1007-793 |
$505.00
|
Add to Cart Request Quote
|
|
DH4-C HD
|
DH4-C Connect Duplex HD CATIV 600V Complete Duplex Lead |
$1,040.00
|
Add to Cart Request Quote
|
|
DH5
|
DH5 set of (2) 2.5m Duplex Handspikes, one with indicator light |
$715.00
|
Add to Cart Request Quote
|
|
DH5-C
|
DH5-C Connect Duplex Handspike 3m (x2) Complete Duplex Lead Set |
$520.00
|
Add to Cart Request Quote
|
|
DH6
|
DH6 1.2m Duplex Handspikes (2 off), one with indicator light, 600V rated. Needed for DLRO10 CATIII 600V rating |
$675.00
|
Add to Cart Request Quote
|
|
DH6-1.2m
|
DH6 1.2m Duplex Handspikes (2 off), one with indicator light, 600V rated. Needed for DLRO10 CATIII 600V rating |
$675.00
|
Add to Cart Request Quote
|
|
DH6-C
|
DH6 1.2m Duplex Handspikes (2 off), one with indicator light, 600V rated. Needed for DLRO10 CATIII 600V rating |
$745.00
|
Add to Cart Request Quote
|
|
DLRO10
|
Digital Low Resistance Ohmmeter - 10A - With DH4-C Modular Duplex handspike set (1006-444), one with indicator lights. 1.5m ~ 5ft. |
$4,640.00
|
Add to Cart Request Quote
|
|
DLRO10 NLS
|
Ducter Ohmmeter, No Lead Set |
$3,940.00
|
Add to Cart Request Quote
|
|
DLRO100E |
DLRO100E LG2-P3 Digital Low Resistance Ohmmeter, 100A, Mains Powered + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian. (Test Leads not included) |
N/A |
Discontinued |
|
DLRO100EB
|
DLRO100EB LG2-P3 Digital Low Resistance Ohmmeter, 100A, Battery And Mains Powered + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian. (Test Leads not included) |
$7,665.00
|
Add to Cart Request Quote
|
|
DLRO100H |
DLRO100H LG2-P3 Digital Low Resistance Ohmmeter, 100A, Mains Powered, Dual Ground, Memory Storage, Remote Control, Asset Tag And USB/Bluetooth Download + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian. (Test Leads not included) |
N/A |
Discontinued |
|
DLRO100HB
|
DLRO100HB LG2-P3 Digital Low Resistance Ohmmeter, 100A, Battery And Mains Powered, Dual Ground, Memory Storage, Remote Control, Asset Tag And USB/Bluetooth Download + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian. (Test Leads not included) |
$9,270.00
|
Add to Cart Request Quote
|
|
DLRO100X |
DLRO100X LG2-P3 Digital Low Resistance Ohmmeter, 100A, Mains Powered with Dual Ground, Memory Storage and USB Download + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian. (Test Leads not included) |
N/A |
Discontinued |
|
DLRO100XB
|
DLRO100XB LG2-P3 Digital Low Resistance Ohmmeter, 100A, Battery And Mains Powered with Dual Ground, Memory Storage and USB Download + US (NEMA) Mains Plug with English, Spanish, Portuguese and Italian. (Test Leads not included) |
$8,365.00
|
Add to Cart Request Quote
|
|
DLRO10HD
|
Heavy Duty Digital Low Resistance Ohmmeter - 10A - With DH4-C Modular Duplex handspike Set (1006-444) 1.5M ~ 5ft |
$5,175.00
|
Add to Cart Request Quote
|
|
DLRO10HD + KC1-TL3-C
|
DLRO10HD Digital Low Resistance Ohmmeter, 10A, Battery and Mains Power, Hi/Lo Output, with Kelvin Clip 3m Test Leads (x2) |
$5,175.00
|
Add to Cart Request Quote
|
|
DLRO10HD-NLS
|
Digital Low Resistance Ohmmeter, 10A, Battery and Mains Power, Hi/Lo Output, supplied without Test Leads |
$4,415.00
|
Add to Cart Request Quote
|
|
DLRO10HD-OB |
DLRO10HD Heavy Duty Digital Low Resistance Ohmmeter - 10A - With DH4-C Modular Duplex handspike Set (1006-444) 1.5M ~ 5ft- Used: The packaging was slightly damaged and everything was opened. All parts included and in good condition. |
N/A |
Discontinued Replaced by: DLRO10HD |
|
DLRO10HDX KC1
|
DLRO10HDX-KC1-TL3-C (1008-095) 10 Amp Digital Low Resistance Ohmmeter with Memory Storage, KC1 Kelvin Clip 3m Lead Set |
$5,935.00
|
Add to Cart Request Quote
|
|
DLRO-10HDX-DH4C
|
Digital Low Resistance Ohmmeter, 10A, Battery and Mains Power, Hi/Lo Output, Memory Storage, USB Download, LG2 US (NEMA) Mains Plug, Connect Duplex Handspikes 1.5m Test Leads (x2) |
$5,935.00
|
Add to Cart Request Quote
|
|
DLRO-10HDX-NLS
|
Digital Low Resistance Ohmmeter, 10A, Battery and Mains Power, Hi/Lo Output, Memory Storage, USB Download, LG2 US (NEMA) Mains Plug, No Lead Set Supplied |
$5,705.00
|
Add to Cart Request Quote
|
|
DLRO10LPU-US
|
DLRO10LPU-US Line Power Unit - US plug/ Battery eliminator; Works with the BITE3 too. |
$610.00
|
Add to Cart Request Quote
|
|
DLRO10X
|
Digital Low Resistance Ohmmeter - 10A including memory/download- With DH4-C Duplex handspike set (1006-444), one with indicator lights. 1.5m ~ 5 ft. |
$5,625.00
|
Add to Cart Request Quote
|
|
DLRO10X-NLS
|
Ducter Ohmmeter, No Lead Set |
$4,910.00
|
Add to Cart Request Quote
|
|
DLRO2
|
DLRO2 2A Hand held, Ducter Low Resistance Ohmmeter EN, FR, DE, ES operation. |
$3,680.00
|
Add to Cart Request Quote
|
|
DLRO200
|
DLRO200-EN Ducter Digital Low Resistance Ohmmeter - 200A (English Keyboard) |
$9,260.00
|
Add to Cart Request Quote
|
|
DLRO200-115
|
DLRO200-115V US Ducter Digital Low Resistance Ohmmeter - 200A Filtered 115V Input (English Keyboard) |
$9,910.00
|
Add to Cart Request Quote
|
|
DLRO200-115 NLS
|
DLRO200-115V (NO LEAD SET) Ducter Digital Low Resistance Ohmmeter - 200A Filtered Output, 115V Input (English Keyboard), US NEMA Plug |
$9,170.00
|
Add to Cart Request Quote
|
|
DLRO200-US
|
DLRO200-US (NO LEAD SET) Ducter Digital Low Resistance Ohmmeter - 200A (English Keyboard) Unfiltered Output, 100 to 125 V AC Input. Fitted with NEMA 5 -15P Plug |
$8,555.00
|
Add to Cart Request Quote
|
|
DLRO2X
|
DLRO2X 2 Amp low resistance ohmmeter with data, test limits and noise rejection mode ( Documenting ) |
$4,165.00
|
Add to Cart Request Quote
|
|
DP1-C
|
DP1-C Duplex Probe-Connect (x1) Probe Only - No Lead (Also connects to BT51) |
$155.00
|
Add to Cart Request Quote
|
|
DPM1000
|
DPM1000 Power clamp meter |
$535.00
|
Add to Cart Request Quote
|
|
DPT1-C
|
Duplex Twist Probe-Connect (X1) |
$144.00
|
Add to Cart Request Quote
|
|
EASYLOC GROUNDING SET |
Grounding set, complete including: earth stake, earth rell, 10 m; alligator clips, black and red (1.5 m cable), carry bag |
N/A |
Discontinued |
|
Easyloc RX Standard
|
EN: Receiver Set 50Hz/R/33 kHz with Depth Measurement, no Carry bag, English version |
$1,850.00
|
Add to Cart Request Quote
|
|
Easyloc System RXT |
EASYLOC SYSTEM RXT - EN, including: Easyloc Rx receiver 50Hz/R/33kHz; Easyloc Tx transmitter 33kHz; Grounding set, complete; with carrying case. English version |
N/A |
Discontinued |
|
Easyloc TX Transmitter
|
EN, 33kHz transmitter set, with grounding set; without bag, English version |
$1,540.00
|
Add to Cart Request Quote
|
|
EF-PA
|
Kit of 4 fuses for PA-9/PA-9 Plus fused probe leads |
|
Request Quote
|
|
EL6-C
|
EL6-C Extension Lead 6 m connect |
$185.00
|
Add to Cart Request Quote
|
|
ETK100
|
100m Earth Test Cables and Spikes Kit |
$810.00
|
Add to Cart Request Quote
|
|
ETK100C
|
ETK100C (2) Clamps and cable reel kit, 330 ft (100 m) |
$1,475.00
|
Add to Cart Request Quote
|
|
ETK30
|
30m Earth Test Cables and Spikes Kit |
$290.00
|
Add to Cart Request Quote
|
|
ETK50
|
50m Earth Test Cables and Spikes Kit |
$720.00
|
Add to Cart Request Quote
|
|
ETK50C
|
ETK50C (2) Clamps and cable reel kit, 165 ft (50 m) |
$1,350.00
|
Add to Cart Request Quote
|
|
ETKIT |
Earth testing kit, ETKIT, comprising - 4 spikes, 2 cable holders (3m+30m and 3m+50m), hammer, connectors and clips and carrying bag |
N/A |
Discontinued |
|
EVCC300
|
EVCC300 Electric Vehicle Charger Checker Mode 3. Type 1 and 2 connections |
$1,040.00
|
Add to Cart Request Quote
|
|
FC-1
|
Function checker |
$110.00
|
Add to Cart Request Quote
|
|
FCC3450
|
3000A flexible clamp meter |
$360.00
|
Add to Cart Request Quote
|
|
GA-00370
|
Kelvin probe cable red with trigger |
$775.00
|
Add to Cart Request Quote
|
|
GA-00371
|
Kelvin probe cable black w/o trigger |
$710.00
|
Add to Cart Request Quote
|
|
GA-00374
|
MOM2 Kelvin Clamp Cable (1); black 5m |
$990.00
|
Add to Cart Request Quote
|
|
GA-00380
|
MOM2 sensing cable kit 5m |
$280.00
|
Add to Cart Request Quote
|
|
GA-00382
|
MOM2 sensing cable kit 10m |
$330.00
|
Add to Cart Request Quote
|
|
GA-00384
|
MOM2 sensing cable kit 15m |
$365.00
|
Add to Cart Request Quote
|
|
GA-03310
|
Leads necessary for dual channel measurement |
$290.00
|
Add to Cart Request Quote
|
|
GA-90000
|
MOM2 Kelvin Probe Cable Kit |
$1,410.00
|
Add to Cart Request Quote
|
|
GA-90001
|
MOM2 Kelvin Clamp Cable Kit |
$960.00
|
Add to Cart Request Quote
|
|
GD-00620 |
MOM2 Soft case Carry Case |
N/A |
Discontinued Replaced by: 6380-138 |
|
HFCT 20
|
permanent HFCT sensor for cable screen, inner-diameter 20mm |
$200.00
|
Add to Cart Request Quote
|
|
HFCT SC40
|
HFCT sensor for cable PD measurements |
$240.00
|
Add to Cart Request Quote
|
|
HFCT SC60
|
HFCT Sensor for cable PD measurements 60mm |
$1,020.00
|
Add to Cart Request Quote
|
|
IAK
|
DLRO10HD and DLRO10HDX CATIII rated industrial application lead kit with terminal cover |
$665.00
|
Add to Cart Request Quote
|
|
IMT100
|
Industrial multi-function tester |
$2,800.00
|
Add to Cart Request Quote
|
|
KC100
|
Wind turbine lightning protection lead set, 100m, on reel |
$2,645.00
|
Add to Cart Request Quote
|
|
KC100C-KIT
|
KC100C-KIT Kelvin clip/probe reel kit (100m+3m) 2 Ohm resistance, for use with DLRO2, wind turbine, airframe etc. applications |
$1,700.00
|
Add to Cart Request Quote
|
|
KC1-C
|
KC1-C Kelvin Clip-Connect (x1) - No Lead (Also connects to BT51) |
$114.00
|
Add to Cart Request Quote
|
|
KC2-C
|
KC2-C Insulated Kelvin Clip-Connect (x1) - No Lead (Also connects to BT51) |
$235.00
|
Add to Cart Request Quote
|
|
KC30
|
Wind turbine lightning protection lead set, 30m, on reel |
$1,515.00
|
Add to Cart Request Quote
|
|
KC50C-KIT
|
KC50C-KIT Kelvin clip/probe reel kit (50m+3m) 1 Ohm resistance, for use with DLRO2, wind turbine, airframe etc. applications |
$1,445.00
|
Add to Cart Request Quote
|
|
KC50E
|
KC50E Extension reel (100m+3m) 1 Ohm resistance, to extend KC100C-KIT or KC50C-KIT |
$745.00
|
Add to Cart Request Quote
|
|
KC60
|
Wind turbine lightning protection lead set, 60m, on reel |
$2,015.00
|
Add to Cart Request Quote
|
|
KL1-C
|
KL1-C (KC1-TL3-C) Kelvin Clip Lead 3m Connect (x2) Complete Duplex Lead Set |
$465.00
|
Add to Cart Request Quote
|
|
KL2-C
|
Insulated Kelvin Clip Lead 3m Connect (x2) Complete Duplex Lead Set |
$655.00
|
Add to Cart Request Quote
|
|
Low Resistance Testing
|
A Guide to Low Resistance Testing |
|
Request Quote
|
|
LT300
|
Loop Tester 50V - 550V single phase - Leads And clips - English |
$1,255.00
|
Add to Cart Request Quote
|
|
MC7144
|
Bushing adapters for connecting the TTRU1 leads to large bushing terminals (quantity 1) |
$57.00
|
Add to Cart Request Quote
|
|
MCC1010
|
Current Clamp - CAT IV 600V rated |
$480.00
|
Add to Cart Request Quote
|
|
MCCA-100B2
|
Current Clamp with AMP Output (BITE2), 9ft cable, 6in ID |
$1,155.00
|
Add to Cart Request Quote
|
|
MCCA-100B3
|
Current Clamp with AMP Output (BITE3), 9ft cable, 6in ID |
|
Request Quote
|
|
MCCV-1KDC-B5
|
DC float/discharge current |
$790.00
|
Add to Cart Request Quote
|
|
MCCV6000-18
|
4-Range, rain-tight, flexible current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 60, 600, 3000, 6000A ranges. Powered by unit. 18cm ID (Cable to instrument 1.82m/6ft) |
$630.00
|
Add to Cart Request Quote
|
|
MCCV6000-27
|
4-Range, rain-tight, flexible current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 60, 600, 3000, 6000A ranges. Powered by unit. 27cm I.D. (Cable to instrument 1.82m/6ft) |
$810.00
|
Add to Cart Request Quote
|
|
MCCV6000-37
|
4-Range, rain-tight, flexible current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 60, 600, 3000, 6000A ranges. Powered by unit. 37cm I.D. (Cable to instrument 1.82m/6ft) |
$990.00
|
Add to Cart Request Quote
|
|
MCP-1000DC-ID
|
Dual range 100A / 1000A self identifying hall effect DC CT. Powered by unit. No batteries required. |
$330.00
|
Add to Cart Request Quote
|
|
MCP-1000DC-ID-KIT
|
- Kit of 4 MCP-1000DC-ID 1000A DC Hall Effect Current Clamps
- For MPQ1000
|
$1,110.00
|
Add to Cart Request Quote
|
|
MCP-100CE-ID
|
Split core current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 1 to 100A range. (Cable to instrument 1.82m/6ft) |
$310.00
|
Add to Cart Request Quote
|
|
MCP-100CE-ID-KIT
|
Kit of 4 MCP-100CE-ID 1 to 100A Split Core Current Clamps |
$1,085.00
|
Add to Cart Request Quote
|
|
MCPD 100L
|
DLRO100 DC Current Clamp (MCPD 100L) |
$335.00
|
Add to Cart Request Quote
|
|
MCT105
|
Cable Tracer Kit |
$225.00
|
Add to Cart Request Quote
|
|
MCV-100B5
|
ripple current measurement |
$133.00
|
Add to Cart Request Quote
|
|
MET1000
|
MET1000 Electrical Tester |
$310.00
|
Add to Cart Request Quote
|
|
MFL205
|
MFL205 Fuse Locator |
$129.00
|
Add to Cart Request Quote
|
|
MFT70-US
|
100V/250V/500V/1000V Multifunction Tester - with neck strap, Memory storage and Bluetooth download + Download Manager, 15/200 mA Continuity test current, Loop and RCD Testing, GFCI tripping current ramp test, Remote test probe - US plug |
$2,335.00
|
Add to Cart Request Quote
|
|
MIT1020 |
Analog/Digital 10 kV Megger; 500, 1000, 2500, 5000, 10,000 V; 35 Tohms |
N/A |
Discontinued Replaced by: MIT1025 |
|
MIT1020/2 |
Analog/Digital 10 kV Megger; 500, 1000, 2500, 5000, 10,000 V; 35 Tohms; Cat IV 600V |
N/A |
Discontinued Replaced by: MIT1025 |
|
MIT1025
|
MIT1025-US Insulation Tester 10kV IRT, IR, IR(t), DAR, PI, DD, SV, Ramp, USB, Battery and line powered to 20TOhms |
$7,540.00
|
Add to Cart Request Quote
|
|
MIT1025-KIT |
MIT1025 with a VF2 Voltage Detector, Extra long 16.5ft Lead set |
N/A |
Discontinued |
|
MIT1525
|
MIT1525-US Insulation Tester 15kV IRT, IR, IR(t), DAR, PI, DD, SV, Ramp, USB, Battery and line powered to 30T |
$8,325.00
|
Add to Cart Request Quote
|
|
MIT1525-KIT |
MIT1525 with a VF2 Voltage Detector, 3m leadset and 5m large leadset X3 |
N/A |
Discontinued |
|
MIT200-EN
|
MIT200-EN 500V Insulation And Continuity Tester with Buzzer |
$605.00
|
Add to Cart Request Quote
|
|
MIT210-EN
|
MIT210-EN 1000V Insulation And Continuity Tester with Buzzer |
$635.00
|
Add to Cart Request Quote
|
|
MIT220
|
MIT220-EN 250V/500V Insulation And Continuity Tester with Buzzer |
$735.00
|
Add to Cart Request Quote
|
|
MIT230-EN
|
MIT230-EN 250V/500V/1000V Insulation And Continuity Tester with Buzzer |
$785.00
|
Add to Cart Request Quote
|
|
MIT2500
|
2.5 kV insulation, continuity, capacitance and result storage and downloading |
$2,130.00
|
Add to Cart Request Quote
|
|
MIT2500-OB |
2.5 kV insulation, continuity, capacitance and result storage and downloading - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: MIT2500 |
|
MIT30 |
30 kV DC Dielectric Test Set; 330 micro amps |
N/A |
Discontinued |
|
MIT300
|
MIT300 EN 250/500 V Insulation and continuity tester with voltage warning |
$855.00
|
Add to Cart Request Quote
|
|
MIT310
|
MIT310 EN 250/500/1000 V Insulation and continuity tester with voltage range |
$855.00
|
Add to Cart Request Quote
|
|
MIT310A |
MIT310A EN analog 250/500/1000 V Insulation and continuity tester |
N/A |
Discontinued Replaced by: MIT310 |
|
MIT320
|
MIT320 EN 250/500/1000 V Insulation and continuity tester + backlight, adjustable limits, switched test probe |
$1,005.00
|
Add to Cart Request Quote
|
|
MIT330
|
MIT330 EN 250/500/1000 V Insulation and continuity tester + backlight, adjustable limits, switched test probe + Test result storage and USB Downloading |
$1,100.00
|
Add to Cart Request Quote
|
|
MIT400/2
|
600V CATIV Industrial Insulation and Continuity Tester 250V/500V/1000V |
$945.00
|
Add to Cart Request Quote
|
|
MIT410/2
|
MIT410/2-LG2 (EN ES PT IT) Insulation And Continuity Tester 50/100/250/500/1000V 600 V CAT IV PI And DAR with Language Group LG2 - English, Spanish, Portuguese and Italian |
$1,100.00
|
Add to Cart Request Quote
|
|
MIT410-TC/3
|
MIT410/TC3-LG2 50/100/250V/500V Insulation and Continuity Tester + 600 V CAT IV + Bed of Nails lead set with Language Group LG2 - English, Spanish, Portuguese and Italian |
$1,100.00
|
Add to Cart Request Quote
|
|
MIT415/2
|
MIT415/2-LG2 (EN ES PT IT) Insulation and Continuity Tester 10/25/50/100/250/500V 600 V CAT IV PI and DAR with Language Group LG2 - English, Spanish (European), Portuguese and Italian |
$1,110.00
|
Add to Cart Request Quote
|
|
MIT420/2
|
MIT420/2-LG2 (EN ES PT IT) Insulation and Continuity Tester 50/100/250/500/1000V 600 V CAT IV PI And DAR, variable voltage, storage/recall with Language Group LG2 - English, Spanish, Portuguese and Italian |
$1,155.00
|
Add to Cart Request Quote
|
|
MIT420/2 KIT
|
MIT420/2 Insulation and Continuity Tester with VF2 Voltage Pen, 50/100/250/500/1000V + 600 V CAT IV + PI And DAR, variable voltage, storage/recall |
$1,417.98
|
Add to Cart Request Quote
|
|
MIT430/2
|
MIT430/2-LG2 (EN ES PT IT) Insulation And Continuity Tester 50/100/250/500/1000V 600 V CAT IV PI And DAR, variable voltage, storage/recall, Bluetooth Download with Language Group LG2 - English, Spanish, Portuguese and Italian |
$1,320.00
|
Add to Cart Request Quote
|
|
MIT481/2
|
MIT481 Insulation Tester EN 50/100/250/500V Telecommunications Cable Length/Cap Storage |
$1,430.00
|
Add to Cart Request Quote
|
|
MIT485/2
|
MIT485 Insulation Tester EN 50/100/250/500V Telecommunications Cable Length/Cap Storage Bluetooth Download |
$1,635.00
|
Add to Cart Request Quote
|
|
MIT485/2TC-LG2 |
50/100/250V/500V Insulation and Continuity Tester + 600 V CAT IV + Bed of Nails lead set with Language Group LG2 - English, Spanish, Portuguese and Italian |
N/A |
Discontinued |
|
MIT515
|
MIT515-US Insulation Tester 5kV IRT, IR, IR(t), DAR, PI, Battery and line powered to 10TOHms |
$3,924.12
|
Request Quote
|
|
MIT515-KIT
|
MIT515 with a VF2 Voltage Detector, Extra long 16.5 ft leadset |
$4,960.23
|
Add to Cart Request Quote
|
|
MIT515-OB |
MIT515-US Insulation Tester 5kV IRT, IR, IR(t), DAR, PI, US plug - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: MIT515 |
|
MIT525
|
Insulation Tester 5kV IRT, IR, IR(t), DAR, PI, DD, SV, Ramp, USB, Battery and Line Powered to 10TOhms |
$6,215.00
|
Add to Cart Request Quote
|
|
MIT525-KIT
|
MIT525 with a VF5 Voltage Detector, Extra long 16.5 ft leadset |
$6,002.93
|
Add to Cart Request Quote
|
|
MIT525-OB |
Insulation Tester 5kV IRT, IR, IR(t), DAR, PI, DD, SV, Ramp, USB, Battery and Line Powered to 10TOhms - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: MIT525 |
|
MJ15 |
Insulation Tester - Battery Powered with additional hand crank 500 V/1 kV/2,5 kV/5 kV analog |
N/A |
Discontinued |
|
MJ159
|
Analog Insulation Tester 100/250/500/1000V 2000MΩ Hand Cranked (212159)
|
$1,690.00
|
Add to Cart Request Quote
|
|
MJ359 |
MJ359 Megger - analog Insulation 100/250/500/1000V Hand Cranked And Line Powered (110 V, 60 Hz) 5kOhms 0-5k? Resistance |
N/A |
Discontinued |
|
MLM50
|
MLM50 Laser Distance Meter |
$135.00
|
Add to Cart Request Quote
|