Description

Phenix 660-10P - AC Vacuum Interrupter Test Sets

2-piece design
External interlock provision
Automated control of output voltage with selectable rate of rise
Digital timer
Memory feature in output voltmeter to record breakdown voltage

The Phenix offers the new model of AC Vacuum Interrupter Test Sets with ratings from 40 kV to 60 kV which are suited for testing a wide range of electrical equipment. These units are lightweight and ruggedly constructed for field use. Each unit provides easy to read digital instrumentation and clean efficient controls.

Testing Applications

Designed primarily for vacuum interrupter testing; however, unit can be used for testing breakers, switch gear and many other apparatus.

Control and Metering Description

Auto Voltage Preset. Press (+) and (-) buttons to select desired test level. Range 00.0 to 60.0 kV
SX1 Connector. Provision for connecting external interlocking switching loop. Open loop prevents high voltage turn on
Dwell Timer. Rotate knobs to preset desired test dwell time. Test time is displayed digitally
TX2 Connector. Connect mating cable to high voltage tank. Metering circuits
TX1 Connector. Connect mating cable to high voltage tank. Power circuits
Output Voltmeter. Dual function digital meter displaying output voltage or failure voltage directly in kilovolts
Output Currentmeter. Digital currentmeter to directly display the test current in milliamperes
Rate of Rise Select. Switch to select desired rate of rise (500 V/S or 3000 V/S)
HV Off Switch/Ready Indicator. Press to turn high voltage off and to abort testing cycle. Lights when high voltage can be turned on
HV On Switch/Indicator. Press to turn high voltage on and to start testing cycle. Lights when high voltage is on. High voltage will not turn on until Ready indicator is lit or if Failure indicator is lit
Failure Indicator/Cycle Reset Switch. Lights to show that failure has occurred or cycle has completed. Press to reset memory meter, cycle and failure detector circuits so that testing may proceed
Control Power On Switch/Indicator. Press to turn on control power. Lights to show that control power is on
Input Power Fuses F1 and F2. Connect power cord to main power source. Main fuses to protect entire test set (10A/120V or 5A/220V)
Fault Indicator. Lights if unit not grounded or line and neutral inputs are reversed. Correct fault so light is out before operating unit
F3 Fuse. Protects primary circuit of high voltage transformer (5A Slo Blow/120V or 5A/220V)
Power Input Connector

Connections and Grounding

Position set in the desired location
Ground set by use of ground terminal on base of high voltage transformer
Connect TX1 and TX2 cables between controls and high voltage transformer
Connect SX1 - external interlock circuit as appropriate
Connect return lead, provided, to low side of test specimen
Connect high voltage output to high side of test specimen
Connect main power cord to appropriate receptacle

(Further instructions on test connections may be found in ANSI C37-60.)

In The Box

Manuals/Guides

Manufacturer Specs

AC Vacuum Interrupter Test Sets Specifications
	Model	640-0.4P	660-10P
Input	Voltage/Current	110-120 V, 5 A 220-240 V, 3 A	110-120 V, 6 A 220-240 V, 3 A
Input	Frequency	50/60 Hz	50/60 Hz
Output	Voltage/Current	≈ 0-40 kV, 10 mA	≈ 0-60 kV, 10 mA
Duty Cycles		120 V input 20 min ON/30 min OFF @ 10 mA	5 min ON/15 min OFF @ 10 mA
Duty Cycles		220 V input 15 min ON/45 min OFF @ 10 mA	5 min ON/15 min OFF @ 10 mA
Digital Metering	Metering Accuracy	0.8% Reading +0.2% Full Scale	0.8% Reading +0.2% Full Scale
	Voltmeter Range(s)	0-40 kV	0-60 kV
	Currentmeter Range(s)	0-10 mA	0-10 mA
Dimensions & Weights
Controls	Length	18.5" (464 mm)	15" (381 mm)
	Width	10.75" (273 mm)	10.5" (267 mm)
	Height	19.5" (495 mm)	13" (330 mm)
	Weight	56 lbs(25 kgs)	31 lbs(14 kgs)
HV Tank	Length	one-piece design	14" (356 mm)
	Width		14" (356 mm)
	Height		17" (432 mm)
	Weight		66 lbs(30 kgs)
Shipping Size	Length	22" (558 mm)	21" (533 mm)
	Width	14" (356 mm)	21" (533 mm)
	Height	24" (610 mm)	16" (406 mm)
	Weight	68 lbs(31 kgs)	39 lbs(18 kgs)
	Length		20" (508 mm)
	Width		20" (508 mm)
	Height		20" (508 mm)
	Weight		79 lbs(36 kgs)
Cables Included	Input Power	8'(2.4 m)	8'(2.4 m)
	Power Interconnect	10'(3m)	10'(3m) (2)
	Ground	10'(3m)	10'(3m)
	Output	10'(3m)	5'(1.5m)

Tech Specs

Safety Testing / Surge Testing/Hipot Tester Template
Test Type Hipot	AC
Test Method (Safety)	ANSI / IEEE C37.60
Max AC Test Voltage	60 kV
Min AC Test Voltage	0 V
Max Trip Current AC Test	10 mA
Min Trip Current AC Test	10 mA
Programmable (hipot)	No
Insulation Resistance Test	No
Connection Type	Other
Arc Detection	No
Scanning control capable for Multipoint Testing	No
Test Equipment General Attributes
Warranty	1 YEARS
Product Weight	101 LBS
Product Height	21.00 IN
Product Length	1620.00 IN
Product Width	21.00 IN
Data Logging	No
HTS/Schedule B Number	9030.33.0080
Calibration Included	NIST Calibration
Power Supply Voltage	120V 50/60 Hz, 220V Only, 240V Only
Country of Origin	United States
Shipping Height	21.00 IN
Shipping Length	1620.00 IN
Shipping Width	21.00 IN

Phenix 660-10P Product Reviews

0

Name: Phenix Technologies 660-10P Portable AC Dielectric Test Set
Brand: Phenix
SKU: Phenix660-10P
Price: 14990.00 USD
Availability: InStock

Out of 5

Average Customer Review

Share your thoughts with other customers

Write a Review


Product	Phenix 660-10P 60kVAC, 10 mA, Vacuum Bottle Test Set (120V)	Phenix 6CP100/50-7.5-230 100kVAC, 75mA/50KV, 150mA (66% Comp, 120V)	Phenix 6CP30/15-3-230 30kVAC, 100mA/15kAVC, 200 mA (50% Comp., 120V)	Phenix 640-0.4P 40kVAC, 10 mA, Vacuum Bottle Test Set (120V)	Phenix 6CP100/50-7.5 100kVAC, 75mA/50KV, 150mA (66% Comp, 120V)	Phenix 6CP100/50-10 100kVAC, 100mA/50KV, 200mA (50% Comp, 230V Only)	Phenix 6CP120/60-10 120kVAC, 83mA/60KV, 166mA (50% Comp, 230V Only)	Phenix 6CP120/60-7.5 120kVAC, 62.5mA/60KV, 125mA (66% Comp, 120V)	Phenix 6CP120/60-7.5-230 120kVAC, 62.5mA/60KV, 125mA (66% Comp, 120V)	Phenix 6CP200/100-10 200kVAC,50mA/100kVAC, 100mA (50% Comp, 230V Only)	Phenix 6CP30/15-3 30kVAC, 100mA/15kAVC, 200 mA (50% Comp., 120V)	Phenix 6CP50/10-3 50kVAC, 60 mA/10kV, 300mA (50% Comp,120V)	Phenix 6CP50/10-3-230 50kVAC, 60 mA/10kV, 300mA (50% Comp,120V)	Phenix 640-0.4P-230 40kVAC, 10 mA, Vacuum Bottle Test Set (230V)
Price
In Stock
Test Type Hipot	AC	AC	AC	AC	AC	AC	AC	AC	AC	AC	AC	AC	AC	AC
Max AC Test Voltage	60 kV	100 kV	30 kV	40 kV	100 kV	100 kV	120 kV	120 kV	120 kV	200 kV	30 kV	50 kV	50 kV	40 kV
Compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare

How Can We Help You?

Questions?

Log in to Your Account

Not a member yet? It's FREE!

Top Categories

Phenix Technologies 660-10P Portable AC Dielectric Test Set

Items in This Series

Recommended for you

Phenix 660-10P Accessories

for the Phenix 660-10P

Phenix CAL/DATA Certificate of Calibration and Test Report

Description

Phenix 660-10P - AC Vacuum Interrupter Test Sets

Control and Metering Description

Connections and Grounding

In The Box

Manuals/Guides

Manufacturer Specs

Tech Specs

Safety Testing / Surge Testing/Hipot Tester Template

Test Equipment General Attributes

Phenix 660-10P Product Reviews

0

Featured Review

We'd love to hear from you

Real people, here to help you.

Get Connected

My Account

Promotions & Offers

Resources

Company