West P6010 and P8010 General Specifications
|
| Output configuration |
Up to 4 total. Max 3 single/1 dual relay, max 1 retransmit of PV, max 1 transmitter power supply |
| Alarms |
Up to 5. Process high low or logical OR (direct or reverse acting). With adjustable hysteresis |
| Viewable Values |
Process variable, maximum value, minimum value and alarm 1 elapsed time since reset |
| Human interface |
3 button operation, 4 digit 10mm (6010) or 13mm (8010) high red or green display,
plus 3 alarm 1 max and 1 min indicator |
| PC configuration |
Off-line configuration from PC serial port to dedicated config socket (comms option not required).
Configuration Software for Windows 98 or higher. West Part Number: PS1-CON |
| Thermocouple |
J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%. |
| RTD |
3 Wire PT100, 50Ω per lead maximum (balanced) |
| DC linear |
0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V.
Scaleable -1999 to 9999, with adjustable decimal point |
| Impedance |
>10MΩ for Thermocouple and mV ranges, 47KΩ for V ranges and 5Ω for mA ranges |
| Accuracy |
±0.1% of input range ±1 LSD (T/C CJC better than 1°C) |
| Sampling |
4 per second, 14 bit resolution approximately |
| Single alarm relays |
Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations. Latching or non-latching |
| Dual alarm relays |
Two x SPST contacts with shared common.
2 Amp resistive at 240V AC, >200,000 operations.
Latching or non-latching |
| SSR driver outputs |
Drive capability >10V DC in 500 minimum |
| Triac outputs |
0.01 to 1 Amp AC, 20 to 280Vrms, 47 to 63Hz |
| DC linear retransmit outputs |
0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min.
Accuracy ±0.25% at 250Ω (degrades linearly to 0.5% for increasing burden to specified limits) |
| Transmitter power supply |
Output 24VDC (nominal) into 910Ω minimum to power external devices |
| Serial communications |
2 Wire RS485, 1200 to 19200 Baud, Modbus and ASCII protocol (selectable) |
| Digital input |
External reset of latched relay, stored alarm 1 elapsed time, stored min/max PV values
or initiate tare function. Volt free or TTL input |
| Temperature & RH |
0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing |
| Power supply |
100 to 240V 50/60Hz 7.5VA (optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts) |
| Front panel protection |
IEC IP66 (Behind panel protection is IP20) |
| Standards |
CE, UL & ULC recognised. Pollution Degree 2, Installation Category II |