Recommend to a Friend
Nice... realy nice
5.0
Flows like butter. Only wish it came as different OD. A thinner version of it would be super!
Old skool solder.. none of that non-lead c**p. on
May 30, 2024
I found this helpful
(0)
Recommend to a Friend
Workhorse
5.0
I've been using this Weller WE1010NA 70W iron in the repair of vintage audio and test equipment for about 6-7 months now, and I have to say it's an appreciable step up from the WE51D 50W, which I still use after 15-ish years of use (abuse?). It heats up faster, holds temperature better, and will return to a preset temp upon powering up that facilitates consistent work/results. One feature I like is the auto standby that lowers temperature after a few minutes of inactivity, saving tips and running cost. Auto standby is easily adjusted to suit working preferences. I also like the heat resistant tip fastening collar which puts a bit more distance between my finger tips and the heating element, as well as enables tip replacement while the element is still hot. There is no back light on the digital display. Reading the display shouldn't be a problem when working in adequately lit spaces. There is no power on indicator, so you can't just look across the room and see that you've left it powered on. There's a nice effective and inexpensive hack/fix for this on YouTube. Build quality is quite good. This Weller unit would fit right in on just about any repair bench that doesn't require a specialized setup. Overall, I'm very pleased with the Weller WE1010NA. It's a high quality, fairly priced tool. Good job, Weller.
Oh, and good job to TE, as well. Always great service, competitive pricing, good availability, secure packaging and fast shipping.
James Pineda on
Apr 15, 2024
I found this helpful
(0)
Recommend to a Friend
Great cutters
5.0
These flush are great for PCB work.
They're inexpensive and last a long time.
When its time to retire them, you don't feel bad about it.
Verified Purchase
Ian Mazursky on
Apr 09, 2024
I found this helpful
(0)
Recommend to a Friend
New Weller
5.0
It is so good to be able to talk with folks that know their products!
I am a new TEquipment Super Fan!!!
Verified Purchase
Clyde Sellers on
Jan 26, 2024
I found this helpful
(0)
Recommend to a Friend
Performed Great, Made In Mexico
5.0
I just started into soldering and have used some of the cheaper solder irons that worked ok. This was head and shoulders better. I looked up other reviews and videos before picking this one up and I'm sure glad I did. Heats up quick, it's intuitive and does the job. It is also not made in China (which was a criteria I had when looking for a soldering station).
One improvement would be a better manual but online videos and tutorials fill that gap too.
USA Buyer on
Jan 22, 2024
I found this helpful
(1)
Recommend to a Friend
Recomended
5.0
Simple user interface once learned. Controllable temperature ranges for SMD devices to thru hole components & smaller gauge wiring found in electronics repair. TEquipment had the best price compared to my other suppliers. Don't hesitate, you won't regret buying the WE1010NA.
N/A on
Jan 14, 2024
I found this helpful
(0)
Recommend to a Friend
Excellent Product
5.0
Works great. Well made. I look forward to using it for years to come.
Elijah Dunn on
Nov 29, 2023
I found this helpful
(2)
Recommend to a Friend
Weller We1010NA
5.0
Great station easy to control and it makes soldering a breeze Highly recommend
Best Mid-Low cost soldering station on the market on
May 25, 2023
I found this helpful
(0)
Recommend to a Friend
Weller WE101NA
5.0
Perfect..................Fast Shipping...........Thank You !!!!!!!!!!
on
Mar 17, 2023
I found this helpful
(2)
Recommend to a Friend
Very sharp
5.0
I got a pair of these from amazon and it was a knockoff, which seems to be the direction it's heading over there in general. Glad to have the real deal from a company i trust. Very sharp and works for my needs. I have a few brands from venders other than amazon and while they are good, i've been reaching for this pair the most. Thank you TEquipment!
Verified Purchase
Richard Morris on
Feb 21, 2023
I found this helpful
(3)
Recommend to a Friend
Absolutely Fantastic!
5.0
I build and repair AMPS, Guitars, & Guitar pedals. My previous solder station started to give out on me and I wanted to try another brand. I searched and read about everything I could and came down to two stations. I decided to grab this one in the end as it came down to price vs feature and TEquipment had a great sale going on, and it was my first purchase from here. I would do it again in a heart beat. It's a great kit, heats up fast, and it's consistent, which is very important to me for quality work. I put my name on everything I work on and it has to be right, I'm very picky on what leaves my shop. This station is solid, and I highly recommend it to anyone that's as picky about quality work as I am. I wouldn't sell anything I wouldn't use myself. If you're on the fence about it, just do it, it's a great solder station. Not to mention the tips are easy to find, removing the worry about knockoffs.
Verified Purchase
Richard Morris on
Feb 21, 2023
I found this helpful
(1)
Recommend to a Friend
Weller WE1010NA
5.0
After 25 years with my old Ungar and its passing I purchased an Weller WESD51D. The WESD51D has served me well for the past 3 years and when I decided I needed a second soldering station I was going to buy another 51D but I decided to go with the WE1010NA. So far it has lived up to expectations. I like the profile it presents on my bench. The screen is easy to see and it is very comfortable to use.
Verified Purchase
William Elks on
Dec 08, 2022
I found this helpful
(1)
Recommend to a Friend
i like always the best
5.0
great price and fast delivery
Verified Purchase
Jose Luis Peña Castillo on
Nov 24, 2022
I found this helpful
(1)
Recommend to a Friend
great iron
5.0
fabulous soldering iron...i have wanted one of these for a while now...finally got it.. recommend it to anyone getting into electronics..
Paul Justice on
Nov 19, 2022
I found this helpful
(1)
Recommend to a Friend
owner/
5.0
another quality weller product, Nothing super Hi-tech, just good serviceable tool to help keep machinery up and working.
on
Oct 14, 2022
I found this helpful
(1)
Recommend to a Friend
Perfect soldering station
5.0
This is the best ironing station that I have ever had. It becomes hot very fast, has a sleep and very well temp regulation.
Petya Gospodinova on
Sep 13, 2022
I found this helpful
(0)
Recommend to a Friend
Great soldering iron
5.0
I got this soldering iron for myself as a birthday present. I've only used it for three repairs so far (crockpot, steam mop, and outdoor thermometer receiver), but each time it worked great. I was very impressed by how quickly it heated up! I will update this review if I have any issues or other feedback in the future.
Kyle T on
Aug 28, 2022
I found this helpful
(1)
Recommend to a Friend
Great clippers
5.0
I've used these a few times. They're very sharp and cut wire and solder with ease. Highly recommended! I'll update this review if I have any issues later with long term durability or quality.
Kyle T on
Aug 28, 2022
I found this helpful
(0)
Recommend to a Friend
Industry Standard
5.0
What can I say? It is everything it claims to be and more! Quality equipment at a very competitive cost!
on
Jul 11, 2022
I found this helpful
(1)
Recommend to a Friend
Great stuff
5.0
This solder is easy to melt and flows well for me. The great price from Tequipment is icing on the cake.
Paul T. on
May 30, 2022
I found this helpful
(0)
Recommend to a Friend
Excellent general purpose soldering station
5.0
We have a half dozen of these stations used for therough-hole PCB work.
Bob Schafer on
Feb 23, 2022
I found this helpful
(0)
Recommend to a Friend
Good Soldering Iron
5.0
Great soldering iron for general use and replacement tips are affordable.
Verified Purchase
Anonymous on
Nov 25, 2021
I found this helpful
(0)
Recommend to a Friend
great product
5.0
Cuts great, very sharp, comfortable in the hand. Great product for a great price.
stephen hill on
Nov 18, 2021
I found this helpful
(3)
Recommend to a Friend
Solder
5.0
The solder is very durable and easy to use. Exactly what we needed
Anonymous on
Nov 12, 2021
I found this helpful
(1)
Recommend to a Friend
CAH
5.0
I have been around Weller products all my life and I waited far too long to buy a Weller soldering station. This unit is everything and more. With the various easy to change tips, projects are easy to do. When you want the station to be 439 degrees, it does it in a matter of seconds. If you want to bump it up to say 575 degrees, it does it in seconds. The point is that this unit does what you want and you can see in the easy to read to display that the temp has been met. As you solder, the temp drops a little but within seconds, it is right back to the requested temp. I had bought a inexpensive soldering station and suffered through using it about three times. I returned it to the store and then bought this Weller soldering station of which I will have for years just like my father that has had his station for years as well. You cannot go wrong with this soldering station as well as the prices and customer service of TEquipment. Thanks you and thumbs up all the way.
The name WELLER says it all. SOLID purchase. on
Nov 10, 2021
I found this helpful
(3)
Recommend to a Friend
Weller WE1010NA
5.0
It is an excellent solder station, easy to use and work well.
Hung Nguyen on
Nov 06, 2021
I found this helpful
(1)
Recommend to a Friend
Great Cutters
5.0
Great small cutters , great price, I have 2 or 3 of these so I always have a pair handy at home and work.
Verified Purchase
Tim on
Nov 06, 2021
I found this helpful
(1)
Recommend to a Friend
Weller for the win...
5.0
I had hoped to introduce my teen son to electronic kit building as my dad did several decades ago. We built a very expensive guitar amp kit. This top of the line Weller is the way to go. Heats quickly, and has great temp control. If you're going to use a soldering iron to assemble many kits, this is the way to go!
Richard Li on
Sep 27, 2021
I found this helpful
(1)
Recommend to a Friend
Stop buying cheap irons, get this one instead
5.0
I spent too much time trying to use a cheap soldering iron before (it was labeled 40W, but I doubt it was even half that)... Saw this on sale and bought it, and it is well(er) worth the money, especially with the promo. This will last decades longer than any of the cheap stuff you will ever buy.
Verified Purchase
Tom on
Jun 25, 2021
I found this helpful
(1)
Great Soldering Station BUT...
3.0
The WE1010NA is a great soldering station. Heat is fast and steady and it does exactly what it does. However, I selected it because it was supposed to have an auto shut off, which it does not! I knew it has an auto setback feature, which sort of works but the auto setback temp. is not adjustable. Bottom line, this station is great as long as you don't accidentally leave it on. BTW, it does not have any sort of indicator light to help warn you that you're walking away without shutting it off.
WE1010NA on
Jun 09, 2021
I found this helpful
(4)
Recommend to a Friend
Works great.
5.0
I took a chance and ordered some. I normally like Radio Shack solder because it is relatively inexpensive and have used it for decades. I got this stuff and man does It work great. Melts beautifully and spreads easily and leaves nice shiny solder joints. Flux is clean and doesn't leave much residue either.
WELL worth the money. Glad it's Made In The USA too!!! I will definitely be buying again. I might even dump all my Radio Shack solder I stocked up on when they were closing their stores down a few years back.
John M Philip on
Feb 23, 2021
I found this helpful
(0)
Recommend to a Friend
A quality solder
5.0
Easily matches the quality of Kester 44 or Multicore 370
Good solder with a good flux on
Jan 28, 2021
I found this helpful
(0)
Recommend to a Friend
Great for trimming leads on circuit boards, they can cut very well.
5.0
Lots of other cutters went into the garbage when i got these, they are sharp, and can cut leads very easily. I love using them.
Verified Purchase
Joseph Massimino on
Jan 15, 2021
I found this helpful
(1)
Recommend to a Friend
Hakko CHP-170
5.0
Great cutters!
Used them on some sheet metal, still holding up.
For the price you can"t beat them.
Hakko CHP-170 on
Jan 03, 2021
I found this helpful
(1)
Recommend to a Friend
Weller WE1010NA Soldering Station
4.0
Performs as expected. Allows stable heat for circuit board repairs. Description of different soldering tips needs improvement.
Joel Ziegelstein on
Dec 07, 2020
I found this helpful
(0)
Recommend to a Friend
Better than the rest.
5.0
I'm glad I bought name brand, the "low cost" cutters are not really that much cheaper.
Sorry Hakko, I used them as tin snips (on slightly oversized gauge sheet metal).
They held up.
Verified Purchase
J. DeSousa on
Dec 02, 2020
I found this helpful
(4)
Recommend to a Friend
Melts Fast
4.0
I put my iron on 680 F and this thing melts within 1 or 2 seconds. The flux for some reason will sometimes pop leaving small bubble residue on my PCB.
Verified Purchase
Timothy Chan on
Dec 02, 2020
I found this helpful
(1)
Recommend to a Friend
Great soldering Station
5.0
Top brand name in my opinion, with good warranty. Feels well built and high quality, heats up very rapidly. Takes up minimal space on workbench.
Verified Purchase
Tim on
Nov 25, 2020
I found this helpful
(0)
Recommend to a Friend
Great flush cutters
5.0
Nice pair of flush cutters for electronics work.
Verified Purchase
Anonymous on
Oct 29, 2020
I found this helpful
(0)
Recommend to a Friend
Quality Built
5.0
Quality built, perfect for auto mobile electrical soldering.
David G on
Oct 17, 2020
I found this helpful
(0)
Recommend to a Friend
Decent cutters
5.0
Affordable and durable flush cutters. I would buy again.
Verified Purchase
Tekmahn on
Oct 15, 2020
I found this helpful
(0)
Recommend to a Friend
Decent iron
5.0
Decent iron at right price. I prefer the analog ones.
Verified Purchase
Decent iron on
Oct 15, 2020
I found this helpful
(0)
Recommend to a Friend
tiny lead clipper very helpful
5.0
small, lightweight, easy to use.
Robert Berman on
Sep 29, 2020
I found this helpful
(0)
Recommend to a Friend
Simply works
5.0
Great product, great price. Difficult to beat this purchase.
Verified Purchase
Colton K on
Sep 29, 2020
I found this helpful
(1)
Recommend to a Friend
Small handy and perfect for small electronics work
5.0
These are pretty sturdy and cut cleanly
on
Sep 27, 2020
I found this helpful
(0)
Recommend to a Friend
Small handy and perfect for small electronics work
5.0
These are pretty sturdy and cut cleanly
on
Sep 27, 2020
I found this helpful
(0)
Recommend to a Friend
hakko cutter
5.0
This is a nice cutter that you can get a close cut on all kinds of wires. They are just the right size to get in close.
on
Sep 27, 2020
I found this helpful
(0)
Recommend to a Friend
Great Deal on Solder
5.0
I miss the days when a pound was 5 bucks but when it became 30 when RoHS showed up - that's too much. Then I found this solder at 17, I can live with that.
Great Price on
Sep 07, 2020
I found this helpful
(0)
Recommend to a Friend
Good stuff!
5.0
Works great. Must have for the bench, sucks up those mistakes.
on
Aug 29, 2020
I found this helpful
(0)
Recommend to a Friend
Perfect solder
5.0
This is the best solder I have used yet. It melts cleanly and for a great price compared to Kester. Would recommend.
Verified Purchase
Ryan on
Aug 25, 2020
I found this helpful
(1)
Recommend to a Friend
Great side cutter!!
5.0
Great side cutter for cutting off legs from soldered diodes. I also have used this to cut the pieces for my gundam kits and it works great!
Verified Purchase
Ryan on
Aug 25, 2020
I found this helpful
(0)
IS WELLER??
1.0
i have this only 6 monthes and the pencil is broken ...can you believe this???in the place whereis joing the metal tip....really is a WELLER????
Anonymous on
Aug 22, 2020
I found this helpful
(7)
Recommend to a Friend
Nice
5.0
Melts and flows very nice. My go to solder. TEquipment great place for my soldering needs.
on
Aug 13, 2020
I found this helpful
(0)
Recommend to a Friend
Would recommend
5.0
These work great and are a good price. I like the angled cutter head for getting into tighter spaces. I do wish the spring loaded action was a little stronger but it's not a big enough concern to look elsewhere.
Verified Purchase
Kyle on
Aug 08, 2020
I found this helpful
(0)
Recommend to a Friend
Weller quality at a excellent price
5.0
I always use Weller tips and irons, quality at a nice price. They perform excellently and long lasting. This is a excellent addition to my lab table.
Verified Purchase
Bcloud on
Aug 03, 2020
I found this helpful
(1)
Recommend to a Friend
Hakko CHP-170
5.0
Very satisfied with the tool and the service
Verified Purchase
Jose Andrade on
Aug 02, 2020
I found this helpful
(0)
Recommend to a Friend
Made in the USA
5.0
Excellent solder made in the USA.
Verified Purchase
AL on
Jul 22, 2020
I found this helpful
(1)
Recommend to a Friend
Really nice
5.0
These get extremely close to the solder and make a nice clean cut. I highly recommend
Verified Purchase
Kirk on
Jul 16, 2020
I found this helpful
(0)
Recommend to a Friend
WELLER WE1010NA
5.0
I bought this Weller station because my 35 years old Weller dies. It does what is said it will do. My first use was to build an 8X8X8 LED light kit. Not easy building but with the WELLER WE1010NA it sure was better. Just set the temp and you get quick solders with little excess heat to the components. Would I buy it again YES, but it will probably be a different model in 25 years.
Dean Fino on
Jul 10, 2020
I found this helpful
(0)
Recommend to a Friend
Hakko Cutters
4.0
What I expected. Good price Took a long time to arrive.
Anonymous on
Jun 29, 2020
I found this helpful
(0)
Recommend to a Friend
Great inexpensive cutters
5.0
I am only an electronics hobbyist but also a professional building contractor, so I am familiar with tool quality. These are great, sturdy little cutters and while maybe not what a pro would want for heavy use, for 5 bucks and light-duty use they are super comfortable to hold and use and you can't beat 'em. They will easily and cleanly cut one single strand of stranded wire, or snip a clean end on a pre-tinned 14g wire end. Grab a couple of these bad boys and put 'em in your kit.
on
Jun 15, 2020
I found this helpful
(0)
Recommend to a Friend
Hardened steel, sharp edges, ergonomically engineered
5.0
This wire cutter is a precision device, with very sharp cutting edges. I reach for it, and only it, every time.
Paul Simone on
May 15, 2020
I found this helpful
(0)
Recommend to a Friend
USA Made
5.0
This solder is great, especially for larger components. I wish it was available in smaller diameter for finer pitch items. Made in the USA, not in Communist China. Flows very well.
Kirk Melton on
May 14, 2020
I found this helpful
(1)
Recommend to a Friend
USA MAde
5.0
A good quality solder for use on larger components. I wish it was available in smaller diameter for finer components. The price and the performance are great, and the fact that it's made in the USA versus Communist China is a bonus.
Good solder on
May 14, 2020
I found this helpful
(1)
Recommend to a Friend
Great!
5.0
not worried about Lead, am not gonna spread it on my toast like butter, although it melts like one easily.
Verified Purchase
Bryan B on
May 07, 2020
I found this helpful
(0)
Recommend to a Friend
All that and then some!
5.0
Great product by Hakko. It's light and strong. Awesome price for such quality craftsmanship.
Verified Purchase
Bryan B on
May 07, 2020
I found this helpful
(0)
Recommend to a Friend
Can't go wrong with this one
5.0
At this price.. I have from cheap crappy ones to 10x more expensive. This one is a good quality, pretty well aligned. Will tell you what happens a year from now :)
Verified Purchase
JJ on
May 06, 2020
I found this helpful
(0)
Recommend to a Friend
Best price for the best nippers by Hakko
5.0
It is hard to find good nippers, but I have very good luck using these. TE has the best price when you buy in bulk.
Joseph Massimino on
Apr 10, 2020
I found this helpful
(0)
Recommend to a Friend
Heats fast, gets the job done.
5.0
I had an older Weller unit that eventually gave up. Bought this one to replace it. One improvement I like is the new unit has an easy to grip knurled screw to easily change tips, no tools needed.
on
Apr 06, 2020
I found this helpful
(0)
Recommend to a Friend
Just One Small Fault
4.0
First the good: Quick heat up, light weight handle, very pliable cord, overall well made.
One Fault: the auto wake up from sleep just does not work. No documentation in manual or web site. Eventually discovered that touching the iron to the wet sponge was supposed to do it. I use bronze wool to clean tip and this does not do it. In the end found that pressing the up button also works.
Anonymous on
Apr 02, 2020
I found this helpful
(1)
Recommend to a Friend
Great price and product
5.0
Super deal and it works great
Peter Maniscalco on
Mar 21, 2020
I found this helpful
(0)
Recommend to a Friend
Changed my skill level to above average
5.0
The temp levels and current status of the unit has changed me from a substandard novice to a competent user on the first use. What a difference a quality soldering station can make for any skill level
I can't believe what a difference this unit makes on
Mar 13, 2020
I found this helpful
(0)
Recommend to a Friend
Great Solder
5.0
got it at a great price. high quality thin solder have used it in a few projects. strong solder bond
on
Mar 08, 2020
I found this helpful
(0)
Recommend to a Friend
Terrific Value in a Digital Soldering Iron!
5.0
I have always trusted Weller soldering equipment and this is my first digitally controlled soldering iron after using their WTCPT irons for 35 years. Very pleased with the WE1010NA iron so far. Very easy to change tips and plenty of power for those parts mounted near heat sinking sources. Highly recommend! Great price too from TEquipment!
Verified Purchase
Joe B. on
Mar 04, 2020
I found this helpful
(0)
Recommend to a Friend
Great general purpose
5.0
I needed a good general purpose solder to go with a new Hakko 888D I purchased. As a complete beginner, I'm very pleased with this solder. I've learned recently by talking to professionals that the solder matters. So I'm glad I ended up with this roll as even I was able to get something done with it.
Verified Purchase
Lefty on
Feb 25, 2020
I found this helpful
(0)
Recommend to a Friend
Great soldering iron
5.0
Very fast heat up, simple controls
Verified Purchase
Markos P. on
Jan 31, 2020
I found this helpful
(0)
Recommend to a Friend
Nice little clipper
5.0
Cuts little wires nicely. Not too wide at tip so it gets into smaller spots. Handle fits hand well and is non slip. Black rubber on outside of grip is nice shape and grippy without being soft or sticky.
on
Nov 09, 2019
I found this helpful
(0)
Recommend to a Friend
Decent side cutters
5.0
I was pleasantly surprised when I took this out of the package, considering the cost. It looks like it will do the job for many years. It fits in my hands very well, and has nice rubberized handles.
Verified Purchase
Matthew on
Nov 09, 2019
I found this helpful
(0)
Do not buy this iron - it will fail
1.0
This iron was purchased as an upgrade to a WES51 because it has higher power.
It is very poor quality and lasted less than three months before the heating element worked loose next to the plastic nut and then controller started buzzing.
Now I have to pay to ship it back to Weller "for review" before they will replace it.
It turns out they have "improved" it. I hope the new one lasts but Weller has lost my busines
fastcat on
Nov 08, 2019
I found this helpful
(9)
Recommend to a Friend
Weller quality
5.0
I haven't had this long enough to give a detailed review, so far the quality of the station is right along with any of my past Weller soldering equipment. This thing has great heat up time, and precise control. I like the feel of the torch, seems to be just what I was needing for PCB work. Great product.
Anonymous on
Oct 19, 2019
I found this helpful
(0)
Recommend to a Friend
Hakko clipper for circuit board components and wires
4.0
Good clipper for (relatively) soft wire and component leads on circuit boards. Appears well made (it IS a Hakko) and was delivered promptly. Glad I bought one!
Verified Purchase
Lawrence Gutter on
Oct 18, 2019
I found this helpful
(0)
Recommend to a Friend
Amerway 63-37 solder
5.0
Melts easy, solders well, perfect size for electronics jobs projects. Thanks.
Verified Purchase
Scott Brown on
Oct 11, 2019
I found this helpful
(0)
Recommend to a Friend
Pres
4.0
Accurate, fast heating. Holds its temperature. Standby feature a plus. Good selection of tips. Manual not very informative.
Verified Purchase
Steve on
Aug 27, 2019
I found this helpful
(1)
Recommend to a Friend
Happy Hubby
5.0
My husband was so excited to get this for Father's Day! He loved it!
Happy husband Happy wife!
MsHappy on
Jul 18, 2019
I found this helpful
(0)
Recommend to a Friend
Excellent soldering station
5.0
Do excellent job !
Verified Purchase
Martial Richer #396 on
Jul 13, 2019
I found this helpful
(0)
Recommend to a Friend
WELLER WE1010NA
5.0
Great replacement for my Radio Shack iron. Flexible cord on iron and weighted iron holder are a plus.
Markie on
Jul 11, 2019
I found this helpful
(1)
Recommend to a Friend
Good & Cheap
5.0
Great price for Great cutters
Verified Purchase
Anonymous on
Jul 01, 2019
I found this helpful
(0)
Recommend to a Friend
Excellent soldering station
5.0
This was my first digital soldering station. This is great. I can visually see if my iron has recovered to my preselected temperature. I can quickly try different temperatures until I get the results I need. No more guessing. Received my new Weller iron very quickly and well packed. Thank you so much.
Phil on
Jun 22, 2019
I found this helpful
(1)
Recommend to a Friend
Impressive performance!
5.0
I have been using a Weller WD1 soldering station for several years and recently bought this as a back up. The price was great— the best I found while searching the web. I tried it a few days ago and I think it may perform better than the WD1 and only cost about 1/3 the price. I highly recommend the WE1010NA. Thank you tequipment for the great prices and super service!
Verified Purchase
James Burgess on
Jun 13, 2019
I found this helpful
(0)
Recommend to a Friend
Perfect
5.0
Just what I was looking for
No problems at all
Verified Purchase
Rob Olsen on
May 28, 2019
I found this helpful
(1)
Recommend to a Friend
Weller 1010NA
5.0
I decided for the Weller as my next soldering iron over the Hakko; the operation of the Hakko seemed just to odd to me.
Tequipment had the best price I could find so i ordered here. Item was delivered fast and arrived well packaged and undamaged.
The iron works great, even better than expected after having seen some reviews. The pen has a nice feel to it, I love the longer cord and how flexible it is. No temperature issues. Good buy, would recommend this to a friend.
Verified Purchase
Anonymous on
May 20, 2019
I found this helpful
(0)
Recommend to a Friend
owner
5.0
excellent product and excellent supplier
jim figgins on
Apr 22, 2019
I found this helpful
(0)
Recommend to a Friend
Free with solderin station
5.0
Got this free with an FX-88. Works great & you can't beat the price!
Verified Purchase
Anonymous on
Apr 15, 2019
I found this helpful
(0)
Recommend to a Friend
Works great
5.0
Amerway AM63.37.SPOOL.1LB solder is working excellent.
Verified Purchase
Kevin Allred on
Mar 26, 2019
I found this helpful
(1)
Recommend to a Friend
Great solder
5.0
As a hobbyist, this solder helped me solder like a pro,
Works well at most temps, used on RC Cars, Slot cars, electronics,
Etc.
Tom on
Mar 09, 2019
I found this helpful
(1)
Recommend to a Friend
Good product
5.0
this model is a improvement of Weller WESD51. It raise the temperature quickly and the construction materials are high quality
Verified Purchase
Wagner_re on
Mar 08, 2019
I found this helpful
(0)
Recommend to a Friend
Great for "free"
4.0
Came free with the purchase of a soldering station kit. looks decent and great for the price.
hobbyist on
Mar 02, 2019
I found this helpful
(0)
Recommend to a Friend
great soldering station for the price
5.0
Great soldering station for the price. Tips are easily replaceable and it's great to be able to dial in the temperature. Only thing that is good/bad is the standby feature. When using the station and it kicks in, it's a bit of a pain. when forgetting to turn off the unit however it's great.
Only other thing I'd like to be able to add would be a fine tip assembly for SMD and related work. It's not available. There are fine tips however and I'll end up trying to work with those.
I wouldn't purchase any brand other than weller, they have been the unit of choice for many years and this unit meets the expectation...
hobbyist on
Mar 02, 2019
I found this helpful
(0)
Recommend to a Friend
great station
5.0
Great station, two things I really like are 1. The display reads out both the setpoint temp and the actual temp of the iron. 2. The grip on the iron is excellent. It's a thin rubbery grip which is maybe the best feeling grip of any iron I've ever used. The control feels almost like as if it were a pencil. Now the reason I gave it only 4 stars is because the ET tips are hard to find in singles. Sure you can easily find them in 5, 10, 18 packs but if you need to replace just one there's not many options. Tequipment expand your ET tip selection.
chris on
Feb 21, 2019
I found this helpful
(0)
Recommend to a Friend
Best soldering iron I’ve ever owned
5.0
It’s hard to get excited about a soldering iron, at least thats what I thought. No more waiting all day for it to heat up. No more crappy tips. This is the Cadillac of soldering. So much easier to do fine soldering on circuit boards. Don’t throw your money away on a cheaper unit only to pitch that in the garbage like I did. Honestly for the price you’d be crazy not to just get this one!
John on
Feb 21, 2019
I found this helpful
(0)
Recommend to a Friend
Amazing!
5.0
I love this stuff - soaks up solder like crazy. Used a few types of random solder wick in the past that didn’t work very well and I assumed that’s how it all was until I tried this Brand/type - worth every penny.
JJ on
Feb 16, 2019
I found this helpful
(0)
Recommend to a Friend
Great Solder Station
5.0
I am a hobbyist that always struggled with soldering projects.
wether it be RC rock crawler, Short Course Truck, Battery Packs,
Slot Car track & Slot Cars, I would complete the task but never satisfied with finished job.
Bought the Weller 1010NA, tips, & watched video's practiced with different tips,
and now I am confident to add digital boards, change motors etc.
Confidence is now 'B ' , & saving $ by not screwing stuff up!
Tom Schmidt on
Feb 15, 2019
I found this helpful
(0)
Bad Quality Control and Cheap Design on the Handle
1.0
Very disappointed at this product since the metal part of the soldering iron came out of the plastic holder way too easy. At 370 C degree to solder some parts who connect to GND plate, a gentle push of the tip can easily cause the joint between the plastic holder and the metal heater break apart.
Although I've been professionally involved with solder for many years as an Electrical Engineer, I had one of my finger tip burnt when the heater part came out. I wish I can upload picture here to show how bad it is.
Although I am always a Weller fan and consistently using Weller at work as well, I am very disappointing with this product.
Verified Purchase
luzhou ye on
Feb 11, 2019
I found this helpful
(4)
Recommend to a Friend
Good quality solder
5.0
Good flowing, good wicking solder. Thin, which I prefer. I got it for free with a purchase, but still the price is good.
Verified Purchase
James Gosnell on
Feb 07, 2019
I found this helpful
(1)
Recommend to a Friend
Amerway AM63.37.SPOOL.1LB
5.0
I am a electronic repair technician. I have worked on All kinds of electronics over the past 30 years I have found Amerway products to be of the best quality in the world and they are made in the USA.
Verified Purchase
David Gray on
Jan 29, 2019
I found this helpful
(2)
Recommend to a Friend
Weller 1010 NA
5.0
I have owned and used Weller Soldiering stations for over 35 years or more. My first one was W-TCP soldering station with a "Magnastat" iron.
I purchased about 1968. It lasted over 25 years. I have had many other models over the years and they all have performed excellent. I would not even consider any other brand. I am sure the Weller 1010NA will give me the same kind of service. They are built to last. I love the slim iron on the 1010NA. I had a mobile Two way radio repair service for many years I put the soldiering stations through hell and they always held up.
Verified Purchase
David Gray on
Jan 26, 2019
I found this helpful
(0)
Recommend to a Friend
Weller Soldering iron
5.0
I've had a Weller soldering iron for about 25 years. It was some of the excess tools that IBM was selling, so it was used when I bought it. That is a pretty good story of reliability. I wanted a new one, so I just purchased one and plugged it in and used it when I got it. It is as good as you can get !!! Could not be happier .
on
Jan 25, 2019
I found this helpful
(0)
Recommend to a Friend
Good Cutter
5.0
Good cutter that works well. Nice handles that are comforable to hold. Spring works well to open cutter.
Verified Purchase
Carl Smith on
Jan 23, 2019
I found this helpful
(0)
Recommend to a Friend
Excellent Soldering Iron
5.0
I manage a company that has 4 of these units in daily operation and have had zero problems with them so far. Very quick to heat up and reliable at a great price!
Verified Purchase
Jeffrey on
Jan 21, 2019
I found this helpful
(0)
Recommend to a Friend
Good for the Price
4.0
The iron is not as nice as some of the more expensive Weller units but it comes surprisingly close at a fraction of the price. Definitely would recommend.
Mark on
Jan 18, 2019
I found this helpful
(0)
Recommend to a Friend
Excellent Low Cost Soldering
4.0
Excellent iron. Heats up very fast compared to my old WES51. Very economical price. Would have to pay much more to get anything better.
I do wish the display had a backlight and there was an auto power off after inactivity besides the set-back (but the set-back is great compared to full temp until power off with the old iron). Those items would have made this a 5 star product.
Verified Purchase
David DeFebo on
Jan 17, 2019
I found this helpful
(1)
Recommend to a Friend
Great for home or shop
5.0
Finally bit the bullet and bought a real soldering station... Can't believe I waited so long! The Weller setup is well designed, functional and surprisingly compact. I was very impressed at how quickly the unit heated up and reached the set temperature. Changing tips is very easy.
Highly recommend this unit!
Verified Purchase
Tim Beghtol on
Jan 15, 2019
I found this helpful
(0)
Recommend to a Friend
Excellent prodcuts, ??
5.0
Your company and products are one of a kind, great products, fast shipping, great attention and good prices.
David on
Dec 23, 2018
I found this helpful
(0)
Recommend to a Friend
Professional Station
4.0
Has some very nice features over my old WLC100.
PROs:
Excellent Temperature control
Tips are soooo easy to replace
Silicone no burn iron cord
Long Life tips
Solid soldering iron stand - all metal not plastic
Stand has places to store extra tips
Positive retention of iron in stand
Configurable standby timer
Fast Startup
CONs:
Display could use a backlight
Would like option of the stand and controller being together as one unit, like my WLC100
I thought the multi-lingual directions were a mess (1 star for this). Lousy pictorials all over the place and minimal english text.
Controller has a small footprint, but very high weight factor >3#. Maybe there is a reason for using a massive Transformer over a switching power supply that is common in most electronics today.
Iron plug/connection feels flimsy-could have spent a little more for a better plug and connector (Hard to mate and then un-plug)
Verified Purchase
Wilcox1976 on
Dec 19, 2018
I found this helpful
(1)
Recommend to a Friend
Convenient and sturdy.
5.0
A convenient tool for flush cutting along my circuit boards. 'Nuff said.
Verified Purchase
Mordecai Glicksman on
Dec 09, 2018
I found this helpful
(0)
Recommend to a Friend
I like this solder
5.0
Very good solder. Melts at a low Temp. and flows good.
Verified Purchase
Anonymous on
Nov 20, 2018
I found this helpful
(1)
Recommend to a Friend
Great company
5.0
Nice company to do business with. Quick service and I am very satisfied with this soldering station. Just what I needed.
Verified Purchase
Anonymous on
Nov 20, 2018
I found this helpful
(0)
Recommend to a Friend
This thing is great
5.0
First let me say this is my first real soldering station. I do mostly automotive electronics repair and some home electronics. Works better than anything I have owned in the past. Very pleased with this purchase. Now I look forward to using it. The temperature control is great. I’d recommend this to any novice looking to improve your soldering ability.
Verified Purchase
Anonymous on
Oct 18, 2018
I found this helpful
(0)
Recommend to a Friend
The Gold Standard
5.0
These are just the best, as everyone knows, and you probably need two or three pairs around the workstation so that you don't have to reach very far for them.
Verified Purchase
John Mortensen on
Oct 12, 2018
I found this helpful
(0)
Recommend to a Friend
Weller WE1010NA
5.0
Had my Weller WS51 soldering station for many, problem free years. The price for the Weller WE1010NA was too good to resist so ordered one primarily as a backup, even though the WS51 is still going strong. Ordering and delivery were problem free. The WE1010NA is exactly what is needed for short run work installing small components, including SMT parts. Just make sure you invest in and use the right tip.
Have checked the WE1010NA out recently. Works as expected. No complaints.
WTS on
Sep 28, 2018
I found this helpful
(1)
Recommend to a Friend
Great Solder
5.0
Great solder. Will buy again.
Verified Purchase
Mario De Vera on
Sep 25, 2018
I found this helpful
(0)
Recommend to a Friend
Operation Manager
5.0
Good product, price and service
Daniel on
Sep 17, 2018
I found this helpful
(2)
Recommend to a Friend
Operation Manager
4.0
Good product, price and service
Daniel on
Sep 17, 2018
I found this helpful
(0)
Recommend to a Friend
WELLER WE1010NA
5.0
I have used the WE series Weller stations for years and this model does not disappoint. It has all the features you would expect and is a nice step up from previous models. The instruction manual is very basic but walking through the menu is very intuitive. The unit heats up quickly and the handle is very light weight. I would definitely recommend this product.
JIM GLATZ on
Sep 10, 2018
I found this helpful
(0)
Recommend to a Friend
Working Great
5.0
Purchased this last year and have been working great. The only drawback about this unit is the rubber piece of the soldering handle is starting to degrade from light use.
Phil on
Sep 09, 2018
I found this helpful
(0)
Recommend to a Friend
Want to like it but....
3.0
I want to like it, but it's stuck in shipping hell. They won't deliver it without signature, and I'm not available when they stop by. Three attempts and it goes back to start all over again. I'm tempted to just hit "return to sender" on the UPS site. TE supposedly could lift the requirement, or have it delivered to a depot but will not. I don't care if it's stolen off the porch anymore. It's been a week and now it's a holiday.
Verified Purchase
Anonymous on
Sep 01, 2018
I found this helpful
(0)
Recommend to a Friend
Weller WE1010NA
5.0
Good step up from irons that don't regulate temperature. If your work is requiring less heat as to not damage other components this is a good Iron for the money.
Anonymous on
Aug 26, 2018
I found this helpful
(0)
Good but not great! Hakko FX888D a better choice!
3.0
This is a totally unbiased review. I have both soldering stations. Hakko FX888D's user interface is not good at all but once you set the presets it is a compromise. Hakko FX888D is a very solid machine and maintains tip temperature well. Weller WE1010NA, on the other hand, drops the temperature like crazy when soldering something big. Not sure if the Weller has 70 watts of power (says it does but definitely does not feel like it). Also no backlight for the Weller which is a shame as you have to make an effort to read the display. Hakko FX888D is a clear winner here.
Verified Purchase
Salman Rashid on
Aug 20, 2018
I found this helpful
(4)
Recommend to a Friend
Great quality
5.0
My favorite cutter.
Verified Purchase
JAIRO ALBERTO ROJAS BOYACA on
Aug 18, 2018
I found this helpful
(0)
Good but not great!
3.0
First of all, there is no backlight. User interface is better than Hakko 888D BUT Hakko 888D is a very solid and robust machine. Hakko 888D does not drop temperature like crazy when you are soldering something that requires more capacity. I wonder if it has really 70 watts of power? Hakko 888D is much better pick; just program the presets to overcome the ridiculous user interface that the Hakko 888D has.
Verified Purchase
Salman Rashid on
Aug 18, 2018
I found this helpful
(0)
Recommend to a Friend
Super Soldering Station
5.0
I am very pleased with this new soldering station. It has very precise temperature control. It heats up very quickly, but decreases temperature quite quickly as well when you set a lower temp. If this unit lasts as long as other Weller units I've owned over the years, it will be my all time favorite soldering station.
Verified Purchase
Timothy Timmons on
Jul 23, 2018
I found this helpful
(0)
Recommend to a Friend
Great value
5.0
This iron offers great value for the price. The controls are simple but fairly easy to operate, the wand has a nice long cord, and the iron heats up reasonably quickly (less than 30 seconds to get 700F) and has changeable tips. I'd recommend getting a Metcal tip-changing pad (MX-CP1) to make the process of changing tips easier. There are a good variety of tips available for the iron, and they're reasonably priced.
Verified Purchase
Anonymous on
Jun 17, 2018
I found this helpful
(0)
Recommend to a Friend
useful
5.0
practical to access small spaces and precise cuts
Verified Purchase
mauricio zamudio on
Jun 16, 2018
I found this helpful
(0)
Recommend to a Friend
Good Product
5.0
As advertised, no complaints.
Verified Purchase
Robert Gatliff on
Jun 14, 2018
I found this helpful
(0)
Recommend to a Friend
Weller WE1010NA
5.0
Great build quality. Heats up quickly. Being able to see and adjust the actual temperature is a real plus. Priced right, too!
Anonymous on
Jun 03, 2018
I found this helpful
(0)
Recommend to a Friend
Worthy Product to replace EC200n series stations
5.0
Been a Weller user since the 70's. This is a great replacement for the EC2000 series. Time will tell for reliability, but it is faster heat up and recovery, wide range of good inexpensive tips and accurate temperature. If it lasts 25 years like my old EC2000 it will be the greatest.
Anonymous on
May 28, 2018
I found this helpful
(0)
Recommend to a Friend
Very good soldering station
5.0
Reliable soldering station. Heads up fast
Verified Purchase
Stephan on
May 27, 2018
I found this helpful
(0)
Recommend to a Friend
Good so far!
5.0
I owned an older weller for years but it was starting to show lots of age so I updated. I really like the digital readout and the auto off. I haven't had it long enough to comment on it's long term durability. But it seems well made and easy to use. The manual is goofy (each page is written in single line description in about 20 languages), I had to figured out the lock function but I think I know what it does (but never will need it), but most functions are intuitive.
Verified Purchase
BruceGo on
May 27, 2018
I found this helpful
(0)
Recommend to a Friend
Excellent customer service!
5.0
Through no fault of their own, upon receipt of my new Weller WT1010N soldering station I noticed the plastic case was broken although not during shipment, it appears it came from Weller that way as the shipping box and the unit packaging looked undamaged. No problem, TEquipment’s courteous customer service promptly resolved the issue via an RMA.
Thank you TEquipment, you are my go to source!
Verified Purchase
Mark on
May 16, 2018
I found this helpful
(0)
Recommend to a Friend
New tool Weller 1010
5.0
I have always used direct wall plug units and I am very glad that I finally purchased a temp control station. The unit is simple to use and holds temp very well. This station has made my work flow much more productive and accurate. I am impressed with the build quality of this unit and I am now looking at a Weller hot air station to complement this station.
Verified Purchase
Christopher Reinhardt on
May 12, 2018
I found this helpful
(0)
Recommend to a Friend
Great station for the hobbiest
5.0
This is a great iron for the hobby electronics enthusiast.
Verified Purchase
Anonymous on
May 06, 2018
I found this helpful
(0)
Recommend to a Friend
Great Soldering Station
5.0
I bought this to repair electronics and appliances. It works as well as my old Weller station (EC 2002) did. It heats up fast and is very easy to use. Many of the reviews I read online before buying said that the manual is bad, and lacked information. I don't think it does. I figured it all out pretty quick.
Verified Purchase
Christopher Lee on
May 02, 2018
I found this helpful
(0)
Recommend to a Friend
Excellent product and service
5.0
I'm just a home hobby user. We had some Weller solder stations at work and I borrowed them, but they really weren't as nice as this one. This one is programmable and variable in temperature.
Shipment from TE was super fast. Product was perfectly packaged and worked just like I saw in some of the video reviews out of the box. Comes up to the set temperature quickly and holds it there. My work involved removing through hole parts and I just need to learn how to de-solder faster and cleaner. But this Weller station is fantastic and well priced.
If I could just learn how to use the solder wick and de-solder
chuck on
Apr 30, 2018
I found this helpful
(0)
Recommend to a Friend
High-tech soldering station old-fashioned quality
5.0
Very pleasantly surprised with the quality of this soldering station. should have bought it long ago.
Anonymous on
Apr 28, 2018
I found this helpful
(0)
Recommend to a Friend
Great station
5.0
Wonderful station!
Heats up quickly, holds temp, and has plenty of power. Tips are easy to change, even while hot. This thing makes soldering fun
Verified Purchase
Rob on
Apr 21, 2018
I found this helpful
(0)
Recommend to a Friend
WELLERWE1010NA
5.0
Been using Weller for 50 years consistent quality!
Sinar on
Apr 20, 2018
I found this helpful
(0)
Recommend to a Friend
Awesome
5.0
Best soldering iron I have had. You have to try this one!
Jeep on
Apr 18, 2018
I found this helpful
(0)
Recommend to a Friend
Great Iron
5.0
Best soldering iron that I have ever owned!
Scott on
Apr 14, 2018
I found this helpful
(2)
Recommend to a Friend
Weller WE1010NA 70 Watt Soldering station
5.0
Great unit, heats up quickly, time adjustable auto rest feature, nice handpiece. The display is with large easy to read font, only wish the display had a LIGHT!
neil Perlman on
Apr 10, 2018
I found this helpful
(0)
Recommend to a Friend
Melts like butter
5.0
I've always been a Kester solder person, but since tequipment doesn't handle Kester and I needed solder for a installation I thought I'd give this brand a try. Overall it seems to work very well. Flows easily and
this size is good for tight spots and some surface component repair work. Pricing is reasonable too.
I'd have no problem recommending it.
Verified Purchase
MrSmoke on
Mar 31, 2018
I found this helpful
(2)
Recommend to a Friend
Nice Piece - Good Value
5.0
It's a Weller. That pretty much sums it up. The unit is a solid station with very easy to use controls and interface. And boy does this unit
ever heat up fast!!! No one likes to wait around for their soldering iron to get up to temp - you folks know what I mean I am sure. The temperature sensor is super sensitive so you can see how much heat you are sucking out of the iron while soldering. The pen fits nicely in hand and the cord is super supple and pliant.
Make sure that you get a selection of tips to go with the unit when you order. You will definitely need them. Remember keep your
tips clean!
All in all this is a great value for the price and will work well for
hobbyist and those with serious soldering needs. And the customer service and delivery are excellent from tequipment.net!
Verified Purchase
MrSmoke on
Mar 31, 2018
I found this helpful
(1)
Recommend to a Friend
great so far
5.0
Just received this recently and was pleased with my first use. Heated up very quickly, build-quality is high. Documentation could be improved. There's very little information but printed in just about every language imaginable.
Verified Purchase
Rex Lu on
Mar 29, 2018
I found this helpful
(0)
Recommend to a Friend
It takes Quality Tools to deliver Quality Work
5.0
I’ve used many different brands of hand tools, & these are the best flush-cutters by far. Comfortable, precision made, & durable!
Gfkdrobi on
Mar 24, 2018
I found this helpful
(0)
Recommend to a Friend
Nice, Budget Cutter
5.0
One day, I might splurge on an expensive cutter, but for an inexpensive cutter, these work fine and last reasonably long.
Verified Purchase
Thom Mackris on
Mar 24, 2018
I found this helpful
(0)
Recommend to a Friend
a GREAT upgrade
5.0
VERY pleased. a huge improvement over the WES series. Much more controllability, and easy to use.
Delighted.
Verified Purchase
DAVID BLANE on
Mar 22, 2018
I found this helpful
(1)
Lasted less than 4 hours
1.0
Became non functional after less than 4 hours of use.
Tequipment response: Thank you for your review. I am sorry to hear the product failed. Please contact us so we can replace it for you.
Verified Purchase
Steve on
Mar 17, 2018
I found this helpful
(1)
Recommend to a Friend
Amerway - SN63 / PB37 Tin / Lead Solder, 1 Pound S
5.0
Great solder for small circuits at a great price. Fast shipping.
Dave on
Mar 15, 2018
I found this helpful
(3)
Recommend to a Friend
Good Cutter
5.0
Good quality, useful for flush-cutting through-hole component leads/
Verified Purchase
Pierre-Luc Drouin on
Mar 13, 2018
I found this helpful
(0)
Recommend to a Friend
Perfect for soldering in tight spaces
5.0
Intuitive controls, small soldering tip made it the perfect tool for building a component in my amateur radio station. Tip temperature was rock steady making for consistent joints. Highly recommended.
John on
Mar 10, 2018
I found this helpful
(2)
Recommend to a Friend
Excellent all-purpose soldering station!
5.0
I was about to buy the older analog Weller soldering station, until I discovered this one at a great price here. Since I work on solid state as well as tube-type equipment, I especially value the 70-watt power capability and Weller's wide range of tips available.
Verified Purchase
Brian Shore on
Mar 09, 2018
I found this helpful
(1)
Recommend to a Friend
Amazing soldering station
5.0
Been using some "cheap" soldering station for my hobby projects until I decided to get a better station. In a few words: Night and Day! This soldering station reaches the desired temperature in seconds and has no problem maintaining it.
At the beginning I thought that the station was deffective or something since after a few minutes of soldering, it was suddenly shutting down. I then realized that by default it has a standby time of 2 minutes so after changing that to a longer time things were back to normal.
I highly recommend this soldering station. I now need to find more projects so I can use it again and again and again. :)
Verified Purchase
Gaston Dombiak on
Mar 03, 2018
I found this helpful
(1)
Recommend to a Friend
Weller WE1010NA Solder Station
5.0
After years using a 40 year old Weller solder station with non adjustable temperature setting I decided to purchase one with adjustable temperature and higher power than my old 45 watt one. The Weller WE1010NA is excellent in all respects, Extremely well designed and constructed, very fast heating, very comfortable iron with high quality flexible cord, and modern digital controls. Amazingly this station actually cost me less than I was expecting to pay and hardly any more than my old but reliable weller. Fantastic product and highly recommended.
Verified Purchase
mark malkin on
Feb 28, 2018
I found this helpful
(1)
Recommend to a Friend
Weller 1010 soldering station
5.0
Bought this soldering station for my rc hobby. The best I’ve used to date. I would recommend this unit for the pro or novice. Best value for the dollar. Excellent price point.Exellent power.
Verified Purchase
James Clark on
Feb 27, 2018
I found this helpful
(1)
Recommend to a Friend
Weller WE1010NA
5.0
I've used the Weller Wes51d for many years. This new unit, which replaces the 51d, provides all the performance you expect from Weller.
Verified Purchase
Anonymous on
Feb 25, 2018
I found this helpful
(1)
Recommend to a Friend
Great Soldering Station
4.0
This is my first "Soldering Station". I have always used a 35W solder iron for general electrical repairs around the house and on vehicles. This unit heats up very fast and the soldering wand feels comfortable along with the cord being flexible makes for a nice soldering experience. The reason I give it 4 stars is that to change the tip you unscrew the retaining tube and slide it off. My iron had burs on the inside tube that made unscrewing and sliding the outer tube off stiff and sounded like scrapping metal. I ended up filing the burs smooth and now the outer tube slides nicely on and off. Not a big deal, but I feel Weller is a top name soldering manufacture and am a little disappointed in needing to file burs on a new unit. I have read some reviews that complain about the lack of detailed instructions in the manual, but it's not too hard to figure out. In the end, I would recommend this unit.
Verified Purchase
Andy Burlager on
Feb 22, 2018
I found this helpful
(2)
Recommend to a Friend
Weller WE1010NA
5.0
good product and save money.
Verified Purchase
CS on
Feb 21, 2018
I found this helpful
(0)
Recommend to a Friend
WE1010NA 70 watt digital soldering station
5.0
easy to set up, works great, easy to change tips, the price from TEquipment is very good for this product.
H.D. on
Feb 21, 2018
I found this helpful
(0)
Recommend to a Friend
Larry Davidian
5.0
This unit is the best Weller has to offer for the money. It is well built and works better than advertised.
Verified Purchase
Lawrence Davidian on
Feb 20, 2018
I found this helpful
(0)
Recommend to a Friend
This soldering iron works great
5.0
It heats fast, and maintains an accurate temperature. The solder pencil is smaller, lighter, and easier to hold than my old Brand X. Operation is simple and intuitive.
Verified Purchase
David Crawford on
Feb 17, 2018
I found this helpful
(0)
Recommend to a Friend
Fantastic iron, Fast shipping.
5.0
I work in flight simulation and often have a need to rework or modify circuits. The Weller 1010NA is a great station. Compact, the iron itself is slim and easy to hold. The temperature control is accurate and the availability of a multitude of tips is very convenient. Shipping was rather quick considering it crossed a border and customs.
110% Satisfied.
Verified Purchase
Frank Bowie on
Feb 17, 2018
I found this helpful
(0)
Recommend to a Friend
Great product
5.0
Great product for beginer to intermediate project/skill . Heat fast and stable temp, easy to understand even with the instruction that explain almost nothing.
And good job on shipping, was fast and well packaged, received with no damage at all
Verified Purchase
Jean-Philippe Boyer on
Feb 13, 2018
I found this helpful
(1)
Recommend to a Friend
Great Soldering Station
5.0
The Weller is reliable, easy to use, intuitive navigation, standby mode. NIce Item.
Verified Purchase
N4chor on
Jan 27, 2018
I found this helpful
(2)
Recommend to a Friend
Great soldering iron
5.0
I have used the older analog version at an avionics shop. Weller is a great brand. I’m very happy with this unit, easy to control temps and such nice quality.
Verified Purchase
Brandon on
Jan 23, 2018
I found this helpful
(1)
Recommend to a Friend
i like it!
5.0
i like it, a good value and pleasant shopping experience.
Verified Purchase
Brook Hadley on
Jan 18, 2018
I found this helpful
(1)
Recommend to a Friend
Great price for solder
5.0
This is excellent quality solder for small parts pc board installation or resolder.
Gary on
Jan 02, 2018
I found this helpful
(0)
Recommend to a Friend
Good clean solder
5.0
Good high quality solder, not too thick, which makes it easier not to glob it on too much.
TechnoMarie on
Dec 31, 2017
I found this helpful
(0)
Recommend to a Friend
Quality tool
5.0
I bought two of these, one for my son, and one for myself. I've bought these before from other places, but the blades weren't as precisely aligned as from this company, another quality product.
TechnoMarie on
Dec 31, 2017
I found this helpful
(0)
Recommend to a Friend
Hakko CHP-170 wire cutters
5.0
Great little wire cutters for the money. I keep several of these around. Great for hobbies and serious electronics work.
Verified Purchase
David BeDell on
Dec 28, 2017
I found this helpful
(0)
Recommend to a Friend
Hakko CHP-170 wire cutters
5.0
These little side cutters have the perfect off set angle for circuit board work. They work great for cutting off the through hole component wires and have cut through everything very well. Great tool for the price. I would recommend them.
Verified Purchase
Steven Brauch on
Dec 12, 2017
I found this helpful
(0)
Recommend to a Friend
AM63.37 1LB sloder spool
5.0
This solder is great for circuit board work. It's fine but not for SMD or surface mount without being very careful. It does melt easy and flow's very good. Great for the money.
Verified Purchase
Steven Brauch on
Dec 12, 2017
I found this helpful
(0)
Recommend to a Friend
Good Pair of Cutter
5.0
well made and good quality
Anonymous on
Jan 08, 2017
I found this helpful
(0)
Recommend to a Friend
CHP-170
5.0
Great product for the price. We love these little clippers.
Amy on
Nov 28, 2016
I found this helpful
(0)
Recommend to a Friend
Great Tool
5.0
No regrets what so ever. Feels good in the hand cuts nice and clean.Great tool
Verified Purchase
Kamal Welcome on
Aug 20, 2016
I found this helpful
(0)
Recommend to a Friend
Awesome Product and Great Customer Service..
5.0
I got this a while ago and it's an awesome product and Tequipment is one of the best companies around to buy and deal with case of a problem..
Verified Purchase
jason standhope on
Nov 18, 2015
I found this helpful
(0)
Recommend to a Friend
Good tool
5.0
This is a well designed and well made tool. Performs very well.
Verified Purchase
Joshua Condict on
Oct 07, 2015
I found this helpful
(0)
Recommend to a Friend
Hakko wire cuters
5.0
Great
Verified Purchase
Robert De Guarde on
Jul 10, 2015
I found this helpful
(0)
Recommend to a Friend
Best Service
5.0
Hakko makes wonderful products and they are the best products out there for the money...I would suggest buying all your electronics and tools and needs from Tequipment.net you won't find a better place..
Verified Purchase
Torque on
Jun 17, 2015
I found this helpful
(0)
Recommend to a Friend
Hakko Cutter
5.0
Hakko has good quality products.
Anonymous on
May 25, 2015
I found this helpful
(0)
Recommend to a Friend
Hakko CHP-170 excellent tool
4.0
Have used this cutter for several days now for hours at a time and I am very happy with the comfort in my hand. Sharp clean cuts removing SMT and TH leads on components for reuse and repair. Would give it 5 stars, but need more time in use to evaluate wear and sharpness after a few months.
Verified Purchase
Henry on
May 19, 2015
I found this helpful
(0)
Recommend to a Friend
Great
5.0
Great close clip on board. Nice for the price!
Verified Purchase
keith black on
Apr 18, 2015
I found this helpful
(0)
Recommend to a Friend
Can’t Beat this Little Cutter!
5.0
Most important is that this cutter is sharp! It makes perfect straight cuts and will be one of the best tools in my box.
Verified Purchase
Shuttleman on
Apr 17, 2015
I found this helpful
(0)
Recommend to a Friend
Excellent clean cutter
5.0
This is an excellent pair of cutters. Very comfortable spongy grips. Cuts very cleanly.
Anonymous on
Apr 14, 2015
I found this helpful
(0)
Recommend to a Friend
Great Cutter
5.0
I have several types of the same brand, Cutters, long nose pliers, etc. These are great cutters. Lightweight makes these great if you have a lot of light gauge wire cutting or through-hole wire to cut after soldering. Would recommend these to both the enthusiast or professional
Great cutter on
Apr 09, 2015
I found this helpful
(0)
Recommend to a Friend
Works great!
5.0
Very sharp & works perfectly! I would definitely recommend!
Verified Purchase
Sonja Smith on
Apr 09, 2015
I found this helpful
(0)
Recommend to a Friend
Cutter review
4.0
Worked well for the intended application
Anonymous on
Apr 06, 2015
I found this helpful
(0)
Recommend to a Friend
Great cutters
4.0
These cutters have sill got an edge after 6 months of use a real bargain over other brands.
Verified Purchase
Robert Spoon on
Apr 04, 2015
I found this helpful
(0)
Recommend to a Friend
Well-made wire cutter
5.0
Great side cutter that cuts and strips wire with ease.
Verified Purchase
DCB on
Apr 03, 2015
I found this helpful
(0)
Recommend to a Friend
Nice cutters
5.0
This is a well built pair of cutters. A must have for anyone.
DJW on
Apr 01, 2015
I found this helpful
(0)
Recommend to a Friend
A great little tool
5.0
I have purchased cheap side cutters in the past and got what I paid for. These side cutters, on the other hand, are inexpensive and work very well for cutting the small wires I frequently work with. The cuts are precise and clean. This is a must-have tool for your toolbox.
Verified Purchase
Peter Dudash on
Mar 03, 2015
I found this helpful
(0)
Recommend to a Friend
Solid Tool
5.0
Good set of cutters.
Verified Purchase
Mark Zientarski on
Jan 22, 2015
I found this helpful
(0)
Recommend to a Friend
hakko chp-170
5.0
Great cutter, great price! Fast Delivery!
Verified Purchase
Anonymous on
Jan 21, 2015
I found this helpful
(0)
Recommend to a Friend
Great tool
5.0
nice and comfortable cutter
Verified Purchase
SHIHAB KHAN on
Dec 29, 2014
I found this helpful
(0)
Recommend to a Friend
hakko chp-170
4.0
very handy and use full product for its price
Verified Purchase
Constantin Chiru on
Dec 02, 2014
I found this helpful
(0)
Recommend to a Friend
Great Hakko Side Cutters
5.0
These are the best side cutters I've used. They are sturdy, accurate and sharp.
Verified Purchase
GDS on
Sep 10, 2014
I found this helpful
(0)
Recommend to a Friend
Great Side Cutter for Price
5.0
Extremely high quality tool for the price - my normal cutters are 2178M Xcelite side cutters which are 4x the price, and feel almost the same. Check out the -A version which has a little safety clip that stops component leads from flying off (see http://www.hakkousa.com/AHPDirect/images/CHP-170-A.jpg), although right now the -A version doesn't seem to be a normal stock item at TE.
Verified Purchase
Colin O'Flynn on
Sep 05, 2014
I found this helpful
(0)
Recommend to a Friend
Great quality cutters
5.0
I love this cutters, they cut any lead like butter.
Verified Purchase
Douglas Gordillo on
May 14, 2014
I found this helpful
(0)
Recommend to a Friend
Great size, Ergonomic Handle, Clean cut
5.0
Excellent cutter. Provides clean cuts, and the handle is designed for extended use. Great price for a well-designed and high-quality cutter.
Verified Purchase
AGK on
Mar 19, 2014
I found this helpful
(0)
Recommend to a Friend
These are the BEST wire cutters!
5.0
I love these side cutters. Strip wire. Cut wire. Works great.
Anonymous on
Feb 20, 2014
I found this helpful
(0)
No reviews found to display for this rating.