The Weller 500 Series is a full range of medium-sized, robust, precision cutters with a wide range of head shapes. These cutters are manufactured from high-grade tool steel, with cutting edges hardened to Rockwell 63-65 HRc. The precision cutters also feature a non-reflecting surface, are ESD-safe, and can be easily resharpened.

• Medium-size, robust, precision cutters
• Wide range of head shapes
• Manufactured from high-grade tool steel
• Cutting edges hardened to Rockwell 63-65 HRc
• Non-reflecting surface
• ESD safe
• Resharpenable
• Swiss Made

Oval Head: This is the most widely used head shape. It is robust and size for size offers the highest cutting capacity.

Angled Wide/Narrow Head: This head shape provides precise cuts at different working angles.

Pointed Relieved Head: This is the narrowest head shape. The underside is relieved and facilitates optimum access even to extremely hard-to-reach areas.

Semi-Flush: This cut leaves a pyramidal tip at the end of the wire and is suitable for standard jobs where the final shape is not critical. Cutters with this cut can handle both soft copper wires and very hard wires, such as stainless steel.

Flush: This cut leaves a much smaller tip at the end of the wire than the semi-flush cut, without reducing the cutting capacity. The cutting edges are finer than on semi-flush cutters, reducing the effort exerted when cutting and the load on the component. Flush wire ends reduce the effort needed to fit components on printed circuit boards. Erem guarantees precise cutting even after frequent use.

Super Full Flush: Only Erem offers this type of cut, which provides absolutely flush wire ends with no need for rework. Cutters with this cut are absolutely precision-ground and sharpened, with the low effort exerted when cutting and a low load on the component caused by the cut. Soldering tags in soldering-bath procedures are prevented. Cutters of this type are used in microelectronics, space travel, or medical technology, and are suitable for soft wires.