• Single channel programmable DC power supply
• Output voltage: 0 - 32V
• Output current: 0 - 6A
• Total power: 192W
• 4 digit display simultaneously shows voltage, current and power

The UDP1306C is a programmable linear single-channel DC power supply designed as a cornerstone power product for test benches of all types. The UDP1306C caters to users with compact requirements and a demand for high reliability. It excels in minimizing ripple noise, offering a swift transient response, and demonstrates outstanding power supply and load regulation. The device is equipped with robust output capabilities and a comprehensive set of protection functions.

Constant voltage/constant current mode

In constant voltage mode, the output current is less than the set value, the channel indicator will be green (CV), and the voltage is the set value, if the output current reaches the set value, the device will switch to the constant current mode.

In constant current mode, the output current is the set value, the channel indicator will be red (CC), and the voltage is lower than the set value, if the output current is lower than the set value, the device will switch to the constant voltage mode.

The UDP1306C has memory for up to five sets of stored values (M1 – M5). Long press to store, short press to recall. This feature is very convenient for commonly used test settings.

1. Voltage adjustment knob                                            9. Binding post (negative)

2. M1-M5 data storage button                                        10. Binding post (positive)

3. Current adjustment knob                                           11. USB interface (5V/2A)

4. Buzzer switch                                                                 12.Power switch

5. Keypad lock                                                                    13. Output power

6. OUTPUT button                                                             14. Output current

7. CV/CC indicator (green-CV, red-CC)                          15. Output voltage

8. Binding post (ground)                                                  16. Model identification

17. Remote control interface

18. USB Device

19. RS232

20. Power input

21. Voltage selector

22. Vent