Overview
A. Clamp: Measure inductive AC current. Opens to 1.25” (32.0mm)
B. Conductor Alignment Marks: Use to aid the visual alignment of a conductor when measuring inductive amperage. The greatest accuracy is achieved when the conductor inside the clamp is centered at the intersection of these marks.
C. Category Max Indicator: Maximum CAT Rating for clamp jaw.
D. Clamp Lever: Opens and closes current clamp jaw.
E. Rotary Selector Dial: Set Rotary Selector Dial's desired function
F. SELECT Button: Press select DCmV or DCV on Voltage setting; to activate Ohms, Continuity on Ohms/Continuity setting
G. Category Max Indicator: Maximum CAT Rating for input jacks.
H. Wire Separation Tab: Use to isolate an individual wire from a bundle for testing.
I. Test Lead Holder
J. Hand Guide: Used as a point of reference for the operator’s safety
K. Display: Amps (AC/DC) reading will always display on the upper display
L. Test Lead Input Jacks: Multifunction and Positive input jacks. Multifunction input port used for measuring: AC or DC volts, resistance, continuity, diode.
M. Bracket for optional magnetic holder strap (sold separately)
N. Battery Cover: Easy access for replacing batteries without breaking the calibration seal.
O. Battery Compartment Latches
P. Serial Number