• Tests LAN devices and cabling up to the 10000 (10GB) Base-T standard
• Hub/Switch/PC verifier that indicates the equipment Device Type
• LAN speedometer that verifies the speed and duplex of the link
• Includes (2) 9V batteries, (2) RJ45 cables, RJ45 to coax adapter, and case
• 1 year warranty

The Triplett TVR10G Pro has been designed to test LAN devices and cabling to the 10, 100 and 1000 Base-T standard. The Main unit performs the bulk of the tests such as determining the LAN device type (is it a hub/switch or PC?), the LAN speed and duplex (10, 100, 1000, 10000 MB/s, half, or full duplex) and whether PoE (Power over Ethernet) is present without the need of the Remote Probe.

The Remote Probe adds the ability to trace cable locations (by audibly tracing tones cables with all four pairs to insure compatibility with all types of Base-T LANs. The TVR10G Pro helps you locate faulty hubs, PCs or cable connections that are stopping or limiting the performance of your network.

You can even go inline between two LAN devices and determine the final negotiated speed and duplex of the link. Designed for both the LAN installer and repair person, it is useful documenting legacy LANs, installing and repairing LANs or adding equipment to existing LANs.

Complete with (2) 9V batteries, (2) RJ45 cables, RJ45 to coax adapter, and case. 1 year warranty.

1. LAN Test Port

2. LAN Speed and Type Display

3. Power Switch

4. Power LED

5. Test Mode LED

6. Cable Test Port (Main Unit)

7. Cable Test LED (Main Unit)

8. PoE LED

9. Battery Cover (Main Unit)

10. Tester Probe

11. Test Button (Probe)

12. Speaker Volume Adjust Knob

13. Cable Test LED (Probe)

14. Cable Test Port (Probe)

15. Battery Cover (Probe)