• Evaluate ESD Footwear/Floors as a
• Grounding method view real-time measurements
• And Store Data via a computer
• Easy to Use Analysis Software to Zoom, Measure, Print, and Export
• Measures Voltage Generated on the Body While Walking

Perform the ESD Walking Kit on Floors: Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5.

The WT5000 Walking Test Kit has been designed to perform a voltage measurement of floor materials and footwear in combination with a person according to ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. This test will evaluate the performance of the floor/footwear system. This test is of special importance when the floor/footwear system is used as a primary means for grounding personnel.

The WT5000 is supplied with easy-to-use analysis software, you can save, load, zoom, measure, print, and export test results. The WT5000 can display live tests measurements via a Windows PC and via the LEDs on the front panel of the instrument.

Test range: ± 5000 volts

Accuracy: 5% of the measured value

Input impedance: > 10^14 Ohm

Input capacity: < 5 pF

Response time: <= 10 ms

Display: Logarithmic LED-display ± 500 V, changeable to ± 5000 V with Peak Hold function

Output: Analog ±5V DC for each range

Power supply: Rechargeable batteries

Complies with IEC 61340-4-5

The operator walks on the floor section in a six-step pattern and comes to rest with both feet on the floor specimen in front of the EFM meter. The step pattern requires forward and backward steps and a cross-over step: walking test pattern for esd tests

Perform the test three times and the WT5000 will measure the results. Save each test for recording purposes.

Supplied with:

WT5000 Electrometer, A/D-converter with software Digilloscope, rechargeable batteries, power supply, handheld electrode, connecting cables, conductive carrying case, user’s manual, calibration certificate