Terahertz VFL-280 - Visible Fault Locator with 2.5mm Universal Adapter

The VFL-280 Visual Fault Locator is an easy to use piece of equipment that allows the precise location of a breaks or severe micro bends in a fiber or cable under test by visually checking your fiber for leaks of visible light. In the same manner leaky splices or connectors within patch panels can be located and the VFL can assist in locating breaks within the dead zone of an OTDR. Visual fault locators make fiber identification easy in multi-fiber cables.

The VFL-280 is rugged, lightweight and sized to fit in any tool kit. It operates on 2 AA alkaline batteries and the unit has an over-rideable power saver feature that powers down the unit after 30 minutes. It is shipped with a Standard 2.5mm universal adapter. The Unit is designed to be used on both Single mode and Multi-mode fibers.

• TTI VFL-280 Visual Fault Locator
  • This is an easy to use piece of equipment that allows the precise location of breaks or severe micro bends in a fiber or cable under test by visually checking fiber for leaks of visible light.
• Find Poor Splices
  • Use the VFL to find leaky splices or connectors within a patch panel or breaks within the dead zone of an OTDR
• Small Size
  • Just a little wider and taller than a credit card, weighing just over 4 ounces.

Other Features

• Battery powered - Over 100 hours of operation on 2 AA alkaline batteries
• Universal Adapter - Shipped with a universal 2.5mm adapter
• Fiber Identification - Use the VFL to identify fibers in multi-fiber cables suitable for both singlemode and multimode fibers
• Power Save feature - The VFL-280 has an over ridable power saver feature that powers down the unit after 30 minutes.