Analog Signal Bandwidth |
DC to 25 MHz (-3 dB) |
Input Voltage Ranges |
+/- 1 V or +/- 5 V (selectable) |
Resolution |
14 bit |
Transfer Accuracy |
+/- 0.1% Full Scale, +/- 20 mV offset |
Signal Latency (with one meter of fiber) |
Approximately 300 nS |
A/D Sampling Rate |
100 Megasamples/S |
Input Impedance |
50 Ohms or 1 Megohm || 20 pF, (selectable) |
Output Drive Capability |
+/- 5 V open circuit, +/- 2 V into 50-ohm load |
Output Impedance |
50 Ohms |
Digital Inputs |
TTL, LVTTL, CMOS compatible |
Digital Outputs |
LVTTL ( 0 - 3.3 V) |
Digital switching Rates |
0 - 24 MHz |
Digital Signal Edge Uncertainty |
0 - 10 nS |
Laser Wavelength |
850 nm+/- 20 nm |
Optical Transmission Rate |
2.0 Gb/S |
Loss Budget |
15 dB max |
Optical Return Loss |
> 15 dB |
Laser Safety Classification |
Class I safety per FDA/CDRH and IEC-825-1 regulations |
Typical Trans. Distances MM |
250 M - 50/125µ and 150 M - 62.5/125µ |
Typical Trans. Distances SM |
10 KM with 9/125 micron fiber |
Fiber Optic Connectors |
ST standard, FC optional |
LED Annunciators Provided |
Input Overload (TX), Optical Signal (RX) |
Power Requirements |
9 - 24V DC, 500mA |
Power Supply Included |
95 - 260 VAC, 50 - 60 Hz, 16 VA Max - Output 9VDC/.67A with Universal, US, UK, Continental Europe, and Australian plugs included |
Fiber Optic Connectors |
ST standard, FC available upon request |
LED Annunciators Provided |
Input Overload ( transmitter ), Optical Signal - ON ( receiver ) |
Tx and Rx Dimensions |
6.89L x 4.1W x 1.6H in. (175L x 105 W x 40 H mm) |
Operating Temperature |
0 - 40 C |
Weight (each) |
16.2 oz. (0.46 Kg) |
Standard Warranty |
Two Years, Components and Workmanship, 30-day Satisfaction |
Accessories Supplied |
5 pin DIN DB25 Connectors for Digital Inputs/Outputs and Power Supply With International Mains |