| Analog Signal Bandwidth |
DC to 25 MHz (-3 dB) |
| Input Voltage Ranges |
+/- 1 V or +/- 5 V (selectable) |
| Resolution |
14 bit |
| Transfer Accuracy |
+/- 0.1% Full Scale, +/- 20 mV offset |
| Signal Latency (with one meter of fiber) |
Approximately 300 nS |
| A/D Sampling Rate |
100 Megasamples/S |
| Input Impedance |
50 Ohms or 1 Megohm || 20 pF, (selectable) |
| Output Drive Capability |
+/- 5 V open circuit, +/- 2 V into 50-ohm load |
| Output Impedance |
50 Ohms |
| Digital Inputs |
TTL, LVTTL, CMOS compatible |
| Digital Outputs |
LVTTL ( 0 - 3.3 V) |
| Digital switching Rates |
0 - 24 MHz |
| Digital Signal Edge Uncertainty |
0 - 10 nS |
| Laser Wavelength |
1310 nm+/- 20 nm |
| Optical Transmission Rate |
2.0 Gb/S |
| Loss Budget |
15 dB max |
| Optical Return Loss |
> 15 dB |
| Laser Safety Classification |
Class I safety per FDA/CDRH and IEC-825-1 regulations |
| Typical Trans. Distances MM |
250 M - 50/125µ and 150 M - 62.5/125µ |
| Typical Trans. Distances SM |
10 KM with 9/125 micron fiber |
| Fiber Optic Connectors |
ST standard, FC optional |
| LED Annunciators Provided |
Input Overload (TX), Optical Signal (RX) |
| Power Requirements |
9 - 24V DC, 500mA |
| Power Supply Included |
95 - 260 VAC, 50 - 60 Hz, 16 VA Max - Output 9VDC/.67A with Universal, US, UK, Continental Europe, and Australian plugs included |
| Fiber Optic Connectors |
ST standard, FC available upon request |
| LED Annunciators Provided |
Input Overload ( transmitter ), Optical Signal - ON ( receiver ) |
| Tx and Rx Dimensions |
6.89L x 4.1W x 1.6H in. (175L x 105 W x 40 H mm) |
| Operating Temperature |
0 - 40 C |
| Weight (each) |
16.2 oz. (0.46 Kg) |
| Standard Warranty |
Two Years, Components and Workmanship, 30-day Satisfaction |
| Accessories Supplied |
5 pin DIN DB25 Connectors for Digital Inputs/Outputs and Power Supply With International Mains |