| LTX-5511 Specifications |
| Analog Signal Bandwidth |
DC to 25 MHz (-3 dB) |
| Input Voltage Ranges |
+/- 1 V or +/- 5 V (selectable) |
| Resolution |
12 Bits |
| Transfer Accuracy |
+/- 0.1% Full Scale, +/- 20 mV offset |
| Signal Latency |
Approximately 300 nS (with one meter of fiber) |
| A/D Sampling Rate |
100 Mega samples/S |
| Input Impedance |
50 Ohms or 1 Megohm || 20 pF, (selectable) |
| Output Drive Capability |
+/- 5 V open circuit, +/- 2 V into 50 ohm load |
| Output Impedance |
50 Ohms |
| Digital Inputs |
TTL, LVTTL, CMOS compatible |
| Digital Outputs |
LVTTL ( 0 - 3.3 V) |
| Digital switching Rates |
0 - 24 MHz |
| Digital Signal Edge Uncertainty |
0 - 10 nS |
| Laser Wavelength |
LTX-55XX-850; 850 nm+/- 20 nm, LTX-55XX-1310; 1310 nm +/- 20 nm |
| Optical Transmission Rate |
2.0 Gb/S |
| Loss Budget |
15 dB max |
| Optical Return Loss |
> 15 dB |
| Laser Safety Classification |
Class I safety per FDA/CDRH and IEC-825-1 regulations |
| Typical Trans. Distances |
250 M - 50/125µ fiber 150 M - 62.5/125µ fiber |
| Typical Trans. Distances (1310nm) |
>10 KM with 9/125 micron fiber |
| Fiber Optic Connectors |
ST standard, FC optional |
| LED Annunciators Provided |
Input Overload (TX), Optical Signal (RX) |
| Power Supplies |
Universal Wall Mount, W/US, UK, Continental Europe and Australian plugs |
| Power Requirements |
95-260 VAC, 50-60 Hz, 16 VA Max |
| Operating Temperature |
0 - 40 C |
| TX Dimensions (mm) |
175 L x 105 W x 40 H |
| RX Dimensions (mm) |
175 L x 105 W x 40 H |
| Weight (each) |
0.46 Kg |
| Standard Warranty |
2 yrs, Components and workmanship, 30 day Satisfaction Guarantee |
| Accessories Supplied |
5 pin DIN connector for digital inputs/outputs, TX and RX |