×

Terahertz LTS-1500 Loss Test Set

The LTS-1500 is a small, rugged automated fiber optic loss test set with a power meter that characterizes singlemode and multimode fiber links at wavelengths of 850,1300, 1310, 1490, 1550 and 1625nm and a light source with singlemode or multimode lasers. The power meter uses a sensitive InGaAs detector that is calibrated at six wavelengths with an 80+ dB dynamic range. The Light source is a single port system with up to three wavelengths.

In the AutoTest mode, the master unit changes wavelengths at a fixed rate and informs the slave unit of the wavelength currently being measured. Storing the loss measurement saves the loss at each wavelength. Up to 2000 triple wavelength measurements may be stored and recalled via the unit’s USB port or from the front panel. CertSoft reporting software is provided for downloading stored data, organizing the information and report generation.

These auto test loss test sets are also compatible with the LTS functions of the FTE7000 and FTE7500 series OTDRs. The units can perform fiber identification functions with modulation frequencies of 270, 1000 and 2000 Hz

Power is obtained from a rechargeable lithium polymer battery that provides more than 15 hours of continuous operation, its universal power supply, or in a pinch, any common 9V alkaline battery. Standard accessories include a protective rubber boot and stand, USB cable, adaptors for FC, ST or SC connectors for both power meter and light source ports, universal power supply/charger, Manual on CD and CertSoft reporting software.

• Flexible Configuration - The 1500 is available as a Loss Test Set or as a stand alone Power Meter and Light Source in dual and triple wave configurations
• InGaAs Power Meter - InGaAs based optical power meter calibrated at six wavelengths with a +5 to -77 dBm measurement range.
• Auto Test - In the Autotest mode, the master unit (light source) changes wavelengths at a fixed rate and informs the slave unit (power meter) of the wavelength being transmitted.
• Auto Wavelength Recognition - The power meter recognizes the wavelength being tested to help eliminate costly errors.
• Available Wavelengths - The stabilized laser light source may have up to three wavelengths and the power meter is calibrated at 850, 1300, 1310, 1490 and 1550nm and 1625nm.
• Small Size and Rugged - The 1500 Series is built into a very small package that is rugged and lightweight.
• Fiber Identification - The units also performs fiber identification functions with modulation frequencies of 270, 1000 and 2000 Hz.
• Power Options - Power by a rechargeable lithium polymer battery or in a pinch, any common 9V alkaline battery.
• Test Storage - Store up to 2000 three wavelength tests and downloads the information to your PC via USB with the supplied CertSoft software suite