Tempo 508S-G - Wire Finder

• Used to trace dead or energized wires
• Provides reliable results on cables buried up to 3 feet and lengths up to 1000 feet
• Can be used to estimate depth of cables prior to digging
• Both transmitter and receiver are adjustable to optimize results
• Can be used to find a general area, as well as pinpoint location

The Tempo 508S-G is designed to locate the path of energized (120 VAC) or de-energized wires behind walls and underground. The 508S is also capable of locating a specific circuit breaker, pinpointing wires before drilling and verifying dig sites underground. The effective range is up to 3 feet deep and up to 1000 feet in length.

The unit consists of a transmitter, model 508ST, equipped with a thumb wheel for turning the unit on and adjusting the output level, and an IEC socket on the back of the unit for use with either the AC adapter plug or the large alligator clip leads. A two position switch is provided for choosing either the AC adapter plug or the alligator clip leads. The transmitter has an automatic shut off feature. If the unit is left on for approximately 90 minutes, it will shut itself off. The transmitter is constructed of high impact plastic and is powered by one 9v battery.

The receiver, model 508SR, is designed to filter AC power related noise, and is equipped with a thumb wheel for turning the unit on and adjusting receiver gain. The tracking antenna is attached to the receiver with a 5 foot long cable. It is also equipped with the automatic shut off feature, which turns the unit off after 90 minutes.