• All the inputs support UHF, HighVHF and LowVHF
• Automatic balancing according to the programmed output level and equalization slope
• High output power
• Allocation of filters to inputs without restraints
• Powering of pre-amplifiers or BOSS system

32 digital Programmable Filters (ASuite or universal programmer)

Multi-input multiband amplifier, perfect for terrestrial individual or MDU (Multi-Dwelling Unit) installations, that allows programming up to 32 digital filters on 4 LowVHF+HighVHF+UHF inputs (DTT). The multi-band amplifier is equipped with 6 inputs: FM-4xLowVHF/HighVHF/UHF-CATV, and can achieve programmable amplification and balancing of the different RF inputs. 

Thanks to ASuite, the multiband amplifier programming is very easy and intuitive using an Android or Windows/Mac application.

The multi-band amplifier is able to detect LTE signals and automatically set the filter to channel 36 (for LTE600) or 51 (for LTE700), thanks to the automatic LTE filtering.

Avant X: A new evolutionary stage

Avant X is a full digital programmable single-channel headend, which main mission is to achieve a programmable amplification and balance of different RF input signals.

• LowVHF+HighVHF+UHF inputs: the channels present in these inputs can be filtered and adjusted using up to 32 digital filters. Each filter can be tuned to any LowVHF+HighVHF+UHF channel, and its bandwidth can comprise between 1 and 4 channels.
• The arrangement of the 32 filters is configurable based on the number of channels present on each LowVHF+HighVHF+UHF input. It's compatible with ISDB-Tb, ATSC, DVB-T/T2 and NTSC.
• The output level is programmable between 30-55dBmV. Furthermore, an equalization slope of up to 8 dB can be programmed at the output.
• The FM input can be enabled or not. In case this input is enabled, it will be amplified and its output level set to 10 dB below the lowest-level UHF channel (taking into account the equalization slope).
• CATV input: it has an extended frequency range (54-1220MHz). The gain and the slope (0-20dB) are programmable.

Choose the desired programming mode...

Avant X provides different programming options:

• App ASuite for PC/Mac or tablet/Android smartphone, via USB connection (OTG cable included): The multi-band amplifier configuration is performed in a friendly and intuitive environment. A configuration can be defined and stored - even without being connected to the multiband amplifier - only to retrieve it at installation and adjustment time.
• Universal programmer (ref. 7234): The unit is compatible with the programmer, ensuring backward compatibility.

By pressing the READJUST button (short press), the unit is readjusted to the stored configuration values. After the multiband amplifier is adjusted, a manual fine-tuning can be performed to slightly correct the LowVHF/HighVHF/UHF filters' gain.