| Specifications |
| Input / Output |
50 Ohm, N female |
| Supply Voltage range |
110 V…240 V |
| Supply power consumption |
15 W |
| Operating temperature range |
-20°C to 60°C |
| Frequency range |
50 MHz – 1 GHz, (3MHz – 1.3GHz with reduced output power capability) |
| Gain |
36dB typ., see table 1 for details |
| 1dB output compression point @ 10MHz |
+29.5 dBm typ. |
| 1dB output compression point @ 100 MHz |
+30.9 dBm typ. |
| 1dB output compression point @ 500 MHz |
+31.3 dBm typ. |
| 1dB output compression point @ 1 GHz |
+28.7 dBm typ. |
| Noise figure |
2.5 dB typ. |
| 2nd harmonic, 50MHz, Pout=30dBm |
< – 50 dBc typ |
| 2nd harmonic, 200MHz, Pout=30dBm |
< – 40 dBc typ |
| 3rd harmonic, 50MHz, Pout=30dBm |
< – 30 dBc typ |
| 3rd harmonic, 200MHz, Pout=30dBm |
< – 25 dBc typ |
| Total harmonic distortion |
0.85% @200MHz, Pout=27dBm typ.
1.13% @200MHz, Pout=28dBm typ.
2.33% @200MHz, Pout=29dBm typ.
5.6% @200MHz, Pout=30dBm typ. |
| Third order intercept point |
+50dBm, @200MHz, ∆ f = 200kHz typ. |
| Input return loss |
50 MHz: 11dB typ.
800 MHz: 16dB typ. |
| Output VSWR |
50 MHz: 2.1:1
800 MHz: 1.4:1 |
| Maximum ratings |
Maximum input power: +5 dBm.
The output of the TBLPA1 is quite tolerant to output mismatch, however open or shorted load is not recommended, potentially can cause damage. |