Frequency Range |
Sine |
1µHz to 100MHz |
Square |
1µHz to 50MHz |
All Others |
1µHz to 25MHz |
SINE |
Start Phase: |
0-360° |
Phase Resolution |
0.01° |
Harmonics Distortion @1Vp-p (Typ.) |
1MHz to 5MHz |
<-60dBc |
5MHz to 10MHz |
<-57dBc |
10MHz to 25MHz |
<-55dBc |
25MHz to 50MHz |
<-50dBc |
50MHz to 100MHz |
<-45dBc |
Non-Harmonics Distortion @1Vp-p (Typ.): |
1MHz to 25MHz |
<-70dBc |
25MHz to 50MHz |
<-65dBc |
50MHz to 100MHz |
<-60dBc |
THD |
0.1% (DC to 100kHz) |
Flatness (1kHz) |
|
DC to 1MHz |
1% |
1MHz to 10MHz |
3% |
10MHz to 25MHz |
5% |
25MHz to 80MHz |
10% |
Phase Noise (8 points Sine, Max. SCLK, Typ.) |
100Hz Offset |
-80dBc/Hz |
1kHz Offset |
-89dBc/Hz |
10kHz Offset |
-92dBc/Hz |
100kHz Offset |
-112dBc/Hz |
1MHz Offset |
-140dBc/Hz |
TRIANGLE |
Start Phase |
0-360° |
Phase Resolution |
0.01° |
Timing Ranges |
1.0%-99.9% of period |
SQUARE |
Duty Cycle Range |
0% to 99.9% |
Resolution |
0.1% |
Rise/Fall Time |
<3ns |
Overshoot (typ.) |
<5% |
Jitter (rms) |
<100ps |
RAMP |
Timing Ranges: |
0%-99.9% of period |
SINC (Sine(x)/x) |
|
"0 Crossings" |
4-100 |
GAUSSIAN |
Time Constant |
10-200 |
EXPONENTIAL PULSE |
Type |
Rise or Decay, selectable |
Time Constant |
-100 to 100 |
REPETITIVE NOISE |
Type |
Repetitive |
Bandwidth |
25MHz |
DC |
Range |
|
WS8101/2 |
-6V to 6V |
WS8104 |
-6V to 6V |
Pulse Mode |
Single or double, programmable |
Polarity |
Normal, inverted or complement |
Period |
20ns to 1000s |
Parameters Ratio |
1,000,000 to 1 |
Resolution |
5ns |
Pulse Width |
10ns to 1000s |
Resolution |
5ns |
Accuracy |
<2% (typ.) |
Rise/Fall Time |
|
Fast |
<4ns |
Linear |
5ns to 1000s |
High Time, Delay & |
|
Double Pulse Delay |
5ns to 1000s |
Impedance |
50Ω |
Amplitude Window |
10mVp-p to 12Vp-p (1) |
Low Level |
-6V to +5.994V (1) |
High Level |
-5.994V to +6V (1) |
(1) Double into option impedance |
Sample Rate |
1.5S/s to 200MS/s |
Vertical Resolution |
16 bits |
Waveform Memory |
1Mpts |
Min. Segment Size |
16 points |
Resolution |
4 points |
No. of Segments |
1 to 1k |
Waveform Granularity |
1 point |
Sequencer Steps |
1 to 1k |
Sequencer Duration |
600ns min. |
Segment Loops |
1 to 1M |
Advanced Modes |
Automatic, Stepped, Single, Mixed |
Advance Source |
External, internal or software |
Carrier Waveform |
Sine wave |
Carrier Frequency |
1µHz to 100MHz |
Source |
Internal |
AM |
Envelope Waveform |
Sine, square, triangle, ramp |
Envelope Freq. |
1mHz to 100kHz |
Modulation Depth |
0% to 100% |
FM |
Modulating Shape |
Sine, square, triangle, ramp |
Modulating Freq. |
100Hz to 35MHz |
Deviation Range |
10mHz to 175MHz |
ASK / FSK / PSK |
Baud Rate |
1bits/sec to 10Mbits/sec |
Data Bits Length |
2 to 4,000 |
SWEEP |
Sweep Step: |
Linear or log |
Sweep Direction |
Up or Down |
Sweep Time |
1µs to 500s |
Frequency |
10/100MHz |
FREQUENCY |
Resolution |
|
Display |
11 digits (limited by 1µHz) |
Remote |
14 digits (limited by 1µHz) |
Accuracy/Stability |
Same as reference |
ACCURACY REFERENCE CLOCK |
Internal |
1ppm/year aging rate |
External (10MHz) |
TTL, 50% or Sine, 50Ω 0dBm |
AMPLITUDE |
Range |
10mV to 12Vp-p into 50Ω (1) |
Accuracy (1kHz) |
±(1% + 50mV), typ |
Rise/Fall Time |
<3ns, typ. |
Overshoot |
5%, typ. |
OFFSET |
Range |
0 to ±5.994V, into 50Ω (1) |
Resolution |
1mV |
Accuracy |
±(1%+1% of Amplitude +5mV) |
Type |
25MHz/50MHz/60MHz/120MHz |
Type |
Continuous, Triggered, Gated, Burst |
MAIN OUTPUTS |
Connectors |
Front panel BNC |
Type |
Single-ended |
Impedance |
50Ω ±1% |
Protection |
Short Circuit to Ground, 10s max |
SYNC OUTPUT |
Connector |
Front panel BNC |
Source |
Common |
Type |
Single ended |
Waveform Type |
BIT (4 points wide) |
Impedance |
50Ω |
Amplitude |
TTL |
Variable Position Control |
Range |
0 to segment length |
Resolution |
4 points |
DIGITAL PATTERN OUTPUTS (WS8101/2 ONLY) |
Connector |
Rear panel SCSI-2, 68-pin |
Pattern Width |
16-bits, differential |
Source |
Channel 1 only |
Output Level |
LVDS |
Pattern Length |
|
Dedicated Memory |
1 to 128k |
Arbitrary Memory |
16 to 1M |
Update Frequency |
100µpps to 200Mpps |
TRIGGER INPUTS |
Connector |
Rear panel BNC |
Input Impedance |
10kΩ |
Polarity |
Positive or negative, selectable |
Level |
±5V |
Sensitivity |
100mV |
Damage Level |
±12V |
Min. Pulse Width |
10ns |
EXTERNAL REFERENCE INPUT |
Connector |
Rear panel SMB |
Input Frequency |
10MHz |
Impedance & Level |
10kΩ ±2%, TTL, 50% ±2% |
Level |
±5V |
Trigger Delay |
[(0; 200ns to 20s) + system delay] |
Delay Resolution |
20ns |
Delay Error |
6 SCLK + 150ns |
EXTERNAL |
Source |
Rear panel BNC, common |
Slope |
Positive/Negative, selectable |
Damage Level |
±12V |
Input Frequency |
DC to 2.5MHz |
Trigger Level |
-5V to 5V |
Resolution |
1mV |
Sensitivity |
100mV |
Min. Pulse Width |
10ns |
System Delay |
6 SCLK + 150ns |
Trigger Jitter |
±1 SCLK period |
INTERNAL / TIMER |
Range |
200ns to 20s |
Resolution |
20ns |
Error |
3 SCLK + 20ns |
MANUAL |
Source |
Soft trigger command from the front panel or remote |
Separate controls |
Output on/off, amplitude, offset, standard waveforms, user waveforms, user waveform , sequence table |
Common Controls |
Sample clock (Arb), frequency (Std), period (Pulse) reference source, trigger modes, trigger advance source, SYNC OUT. |
LEADING EDGE OFFSET |
Jitter |
0ps |
Offset Range |
0 to ±1M points |
Reference |
Each CH. in reference to CH 1 |
Resolution and Accuracy |
Channels 1/2 |
1 point |
Channels 3/4 |
4 points |
Initial Skew |
<1ns |
Error |
1 SCLK |
Voltage |
85 to 265VAC, 48-63 Hz |
Power Consumption |
60W max. |
Display Type |
Color LCD |
Size |
3.8 |
Resolution |
320 x 240 pixels |
Interfaces |
|
Device |
1 x Rear, USB type A |
LAN |
1 x Rear, 1000/10 BASE-T |
GPIB |
1 x Rear, IEEE-488.2 |
Dimensions (WxHxD) |
|
With Feet |
212 x 102 x 415 mm |
Without Feet |
212 x 88 x 415 mm |
Weight |
|
Without Package |
3.5 Kg |
Shipping Weight |
5 Kg |
Temperature |
|
Operating |
0°C to +40°C |
Storage |
-40°C to +70°C |
Warm up time |
30 minutes |
Humidity |
85% , non-condensing |
Safety |
CE Marked, IEC61010-1-1:2008 |
EMC |
IEC 61326-1:2006 |
Calibration |
2 years |
Warranty |
1 year |