TPI 190 Discontinued Products

0 reviews | Model: TPI 190

Compare

0.05% accuracy, True RMS, 50,000 count DMM

Large 50,000 count display increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm
Triple Display shows more than one reading simultaneously
51 Segment Analog Bar Graph to catch fast AC fluctuations
Back Light (LED Type) allows viewing in any light condition
Auto Range automatically selects the best range for the measurement
Separate battery and fuse compartment for easy replacement
True RMS needed to accurately measure nonsinusoidal AC voltage and current waveforms found on controls and circuits
Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on.
Diode Test displays approximate forward bias voltage
Continuity and buzzer to check for opens and shorts
STANDARD ACCESSORIES
A190 : Protective Boot
A085 : UL Listed Silicone Test Lead Set with Alligator Clips (Screw On)
A104 : 0.5 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each)
A110 : 10 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each)

View Product Details

List Price: $199.95

In Stock:

View Payment Options

Recommended for you

Description

Manuals/Guides

Manufacturer Specs

Basic DC accuracy	0.05%
Compare	Compares stored value with measured value for matching components
Data Hold	Enables the reading on the display to be frozed. The two hold system hold the previous reading when a new one is recieved
Relative	Display a measured value as a percentage of a stored value. Useful for component testing.
Record	Record Minimum, Maximum, and average reading.
Auto Range	Automatically selects the best range for measurement
Continuity & Buzzer	Check for opens and shorts
RS232	Optically isolated software optional
Safety	Designed to meet cULus 3111 and IEC1010
LCD	Large 50,000 count display
Triple Display	Shows more than one reading simultaneously
Bar Graph	51 Segments Analog Bar Graph to catch fast AC fluctuations
Back Light	Allows viewing in any light condition
True RMS	Needed to accurately measure ninsinusoidal AC voltage and current waveforms found on controls and cicuits
Test Leads	Silicone rubber 1,000 CAT III, 600V CAT IV, 10A
Auto Power Off	DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on
Diode Test	Displays approximate forward bias voltage
GENERAL SPECIFICATIONS
Weight	530g
Operating Temp	0?C to 45?C (-32?F to 113?F)
Storage Temp	-20?C to 60?C (-40?F to 140?F)
Relative Humidity	0% to 80%: (0?C to 35?C/32?F to 95?F)
0% to 70%	(45?C to 55?C/95?F to 131?F)
Temp Coefficient	0.1x (Specified Accuracy) per ?C for temperature <18?C to >28?C
Power Supply	9 Volt Alkaline Battery
OPTIONAL ACCESSORIES	9 Volt Alkaline Battery
OPTIONAL ACCESSORIES
A100	Carrying Case
A191	RS232 cable & software for optically isolated IR port
A251	AC Clamp-On Accessory for DMMs 0-400 Amps
A254	Low Current AC/DC Adapter for DMMs 10 Amp range, 0.001 resolution 60 Amp range, 0.01 resolution
A256	AC/DC Clamp-On Accessory for DMMs 0.1 A resolution
A296	AC/DC Clamp-On Accessory for DMMs 0-1,000 Amps
A301	Temperature Adapter with GK11M and battery, 0.1?C or ?F resolution
A620	500psi Pressure/Vacuum Adapter for DMMs

Specification		190 (resolution)	192 (resolution)	194 (resolution)
AC Volts	Max. reading Frequency Best resolution	750 (45Hz to 20kHz) (0.0001V)	750 (45Hz to 20kHz) (0.0001V)	750 (45Hz to 20kHz) (0.0001V)
DC Millivolts	Max. reading Best resolution	500 (0.0001mV)	500 (0.0001mV)	500 (0.0001mV)
DC Volts	Max. reading Best resolution	1,000 (0.0001V)	1,000 (0.0001V)	1,000 (0.0001V)
DC Microamps	Max. reading Best resolution	5,000 (0.01uA)	5,000 (0.01uA)	5,000 (0.01uA)
DC Milliamps	Max. reading Best resolution	500 (0.001mA)	500 (0.001mA)	500 (0.001mA)
DC Amps	Max. reading Best resolution	10 (0.0001A)	10 (0.0001A)	10 (0.0001A)
AC Microamps	Max. reading Best resolution	5,000 (0.01uA)	5,000 (0.01uA)	5,000 (0.01uA)
AC Milliamps	Max. reading Best resolution	500 (0.001mA)	500 (0.001mA)	500 (0.001mA)
AC Amps	Max. reading Best resolution	10 (0.0001A)	10 (0.0001A)	10 (0.0001A)
Ohms	Max. reading Best resolution	500 (0.01 ohm)	500 (0.01 ohm)	500 (0.01 ohm)
Kohms	Max. reading Best resolution	500 (0.0001 Kohm)	500 (0.0001 Kohm)	500 (0.0001 Kohm)
Mohms	Max. reading Best resolution	50 (0.0001 Mohm)	50 (0.0001 Mohm)	50 (0.0001 Mohm)
Frequency Hz	Max. reading Best resolution	500 (0.001Hz)	500 (0.001Hz)	500 (0.001Hz)
Frequency kHz	Max. reading Best resolution	500 (0.0001kHz)	500 (0.0001kHz)	500 (0.0001kHz)
Inductance mH	Max. reading Best resolution	no	100 (0.01)	no
Capacitance Nano Farads	Max. reading Best resolution	no	500 (0.01)	no
Capacitance Micro Farads	Max. reading Best resolution	20,000 (0.001)	100 (0.001)	20,000 (0.001)
Safety		CAT II 1,000V CAT III 600V	CAT II 1,000V CAT III 600V	CAT III 1,000V CAT IV 600V
Fuse		600V 500mA 600V 10A	600V 500mA 600V 10A	1000V 440mA 1000V 11A