| Size |
8.7” x 3.7” x 1.8” (220 mm x 95mm x 45mm) |
| Weight |
1.1 lb (500g)(not including accelerometer) |
| Environmental |
Water: MIL-STD-810F, Method 512.4
IP67 sealed against accidental immersing (1m for 30 min)
Drop: MIL-STD-810F, Method 516.5, Procedure IV 26 drops from 1.22 m
6 additional drops at -4°F (-20°C)
6 additional drops at 140°F (60°C)
Operating: -22° to 149°F (-30° to 65°C)
Storage: -40° to 158°F (-40° to 70°C)
Humidity: MIL-STD-810F, Method 507.4
Sand and Dust: IP67, Mil-STD-810F, Method 510.4, Procedures I and II |
| Power supply |
Rechargeable battery (charger included) |
| Battery life |
Typically 20 hours operating time depending on backlight usage |
| Frequency ranges |
2 Hz to 1 kHz
2 Hz to 10 kHz |
| Frequency Resolution |
Up to 0.02 Hz
400, 800, 1600, 3200, 6400,12800, 25,600 or 51,200 lines FFT |
| Displayed Amplitude Units |
Acceleration in g
Velocity in mm/s ( or inches/s)
Bearing noise in BDU (bearing damage units)
Displacement in Microns/Mils |
| Displayed Frequency Units |
Hertz (Hz), RPM or CPM |
| Dynamic range |
96 dB +/- 50g to +/- 50g with standard accelerometer |
| Auto set up of VA diagnostic bands (RPM = run speed) |
Instability, unbalance, misalignment & diagnostic bands looseness |
| Envelope demodulation filters |
Fully user selectable high pass and low pass filter cut off frequencies |
| IEPE accelerometer interface |
Constant current accelerometer power supply (+20 volts @ 2mA) can be switched off for use w/ BNC output control panels
Supplied with BNC connection lead |
| Numeric Keypad or Touch screen operation |
Stylus free collection of vibration data using numeric key pad or by touching screen |
| Included accessories |
Tachometer, accelerometer (one) and cables, tachometer mount adapter
Carrying case with shoulder strap |