SEM710 RTD and Thermocouple Temperature Transmitter, USB Configurable
The SEM710 is a new generation head mounted temperature transmitter with a built in temperature display. Ideal for indicating the process value at the point of measurement.
It has a universal input that has been designed to accept most common RTD and thermocouple sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It is available in either our SCH4 ABS plastic connection head or our SCH15 Stainless steel connector head. Both of which are available in sensor or wall mount versions.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make.
The SEM710 is the first of a new generation head mounted temperature transmitter with display feature, from Status Instruments. It has been designed to accept most common temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It comes in either our SCH4 ABS plastic connector head or our new SCH15 Stainless steel connector head.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM710 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters are configurable :-
| INPUT TYPE |
LOW RANGE |
HIGH RANGE |
UNITS |
BURNOUT |
USER TRIM |
DISPLAY |
| PT100 Or T/C K, J, E, N, T, R, S |
Input @ 4 mA |
Input @ 20 mA |
°F, °C |
Up/Scale Down/Scale |
On , Off |
°C, °F, mA |
The SEM710 is also provided with user push button trim, allowing trim adjustments at both 4 mA and 20 mA. The user trim function can be locked during configuration if not required. The display will flag error message for sensor failure, also the display will flash under or over range alternatively with actual Input reading, when the temperature exceeds the set range.