SC 36. A1X/AAX Models | SC 81. and SC 88. A1X/AAX Models |
Accessories Included with Set | Accessories Include with Blocks |
(2) SA 2. Half-Round Jaws (.250in radius) | (2) SA 1. Half-Round Jaws (.125in radius) |
(1) SA 4. Scriber Point | (2) SA 2. Half-Round Jaws (.250in radius) |
(2) SA 7. Knurled Screw | (2) SA 3. Straight Jaws (.500in Thickness) |
(2) SA 8. Studs | (1) SA 4. Scriber Point |
(2) SA 9. Flat Head Screws (Long) | (1) SA 5. Center Point (.100 C/L) |
(2) SA 10. Flat Head Screws (short) | (1) Base Block (.500in Thick) |
(2) SA 11. Slotted Nut | (2) SA 7. Knurled Screw |
(1) SA 12. (3/4in tie rod; solid) | (2) SA 8. Studs |
(1) SA 13. (1-1/2in tie rod; solid) | (2) SA 9. Flat Head Screws (Long) |
(1) SA 14. (2-1/4in tie rod; solid) | (2) SA 10. Flat Head Screws (short) |
(1) SA 15. (3in tie rod; solid) | (2) SA 11. Slotted Nut |
(1) SA 16. (4-1/2 - 6in tie rod; adjustable) | (1) SA 12. (3/4in tie rod; solid) |
(2) SA 2. Half-Round Jaws (.250in radius) | (1) SA 13. (1-1/2in tie rod; solid) |
(1) SA 4. Scriber Point | (1) SA 14. (2-1/4in tie rod; solid) |
(2) SA 7. Knurled Screw | (1) SA 15. (3in tie rod; solid) |
(2) SA 8. Studs | (1) SA 16. (4-1/2 - 6in tie rod; adjustable) |
(2) SA 9. Flat Head Screws (Long) | (1) SA 17. (6-9in tie rod; adjustable) |
(2) SA 10. Flat Head Screws (short) | (2) SA 1. Half-Round Jaws (.125in radius) |
(2) SA 11. Slotted Nut | (2) SA 2. Half-Round Jaws (.250in radius) |
(1) SA 12. (3/4in tie rod; solid) | (2) SA 3. Straight Jaws (.500in Thickness) |
(1) SA 13. (1-1/2in tie rod; solid) | (1) SA 4. Scriber Point |
(1) SA 14. (2-1/4in tie rod; solid) | (1) SA 5. Center Point (.100 C/L) |
(1) SA 15. (3in tie rod; solid) | (1) Base Block (.500in Thick) |
(1) SA 16. (4-1/2 - 6in tie rod; adjustable) | (2) SA 7. Knurled Screw |
| (2) SA 8. Studs |
Gage Blocks Included with 36 Piece Set (A1 or AA) | (2) SA 9. Flat Head Screws (Long) |
1 Block .050 | (2) SA 10. Flat Head Screws (short) |
9 blocks .1001 through .1009 (Steps of .0001) | (2) SA 11. Slotted Nut |
9 blocks .101 through .109 (Steps of .001) | (1) SA 12. (3/4in tie rod; solid) |
9 blocks .110 through .190 (Steps of .010) | (1) SA 13. (1-1/2in tie rod; solid) |
5 blocks .100 through .500 (Steps of .100) | (1) SA 14. (2-1/4in tie rod; solid) |
3 blocks 1.000, 2.000, 4.000 | (1) SA 15. (3in tie rod; solid) |
| (1) SA 16. (4-1/2 - 6in tie rod; adjustable) |
| (1) SA 17. (6-9in tie rod; adjustable) |
|
|
| Gage Blocks Included with 81 Piece Set (A1 or AA) |
| 9 blocks .1001 through .1009 (Steps of .0001) |
| 49 blocks .101 through .149 (Steps of .001) |
| 19 blocks .050 through .950 (Steps of .050) |
| 4 blocks 1.000 through 4.000 (Steps of 1) |
|
|
| Gage Blocks Included with 88 Piece Set (A1 or AA) |
| Same as above Plus: |
| 3 blocks .100025, .10005, .100075 |
| 4 blocks 1/16, 5/64, 3/32, 7/64 |