Direct-Reading, Large Micrometer Head with Double Figures on Sleeve and Thimble
These large micrometer heads are designed for use with electronic equipment requiring ultra-fine adjustment for machine tools, fixtures, special gages and tools, special mountings, or wherever micrometer accuracy in setting and adjustment is required.
Another highly useful feature is the spindle adjustment, which permits adjusting the spindle length approximately ±1/16" (1.5mm). If the spindle is to be located against a definite stop and a different zero position is required, first loosen the cap screw in the end of the thimble, position the spindle to the desired location, then holding the spindle in position, rotate the thimble to zero and retighten the cap screw.
The 468 Micrometer heads are the same as the 465, except that they have double figures in red and black on the sleeve and thimble, permitting reading both ways with the spindle moving in either direction. This feature is invaluable on many instruments and microwave applications.
Model | Range | Graduations |
T468XSP-1 | 0-1 inch | .0001 inch |
468MXSP-25 | 0-25mm | 0.01mm |
T468XSP-2 | 0-2 inch | .0001 inch |
468MXSP-50 | 0-50mm | 0.002mm |