DataSure 4.0 Bridge Extender
The Starrett 1402B DataSure 4.0 Bridge Extender is a powerful radio extender used to multiply the distance of the wireless network. This unit plugs into a USB port on the main PC running DataSure 4.0. Part of the Remote Gateway network.
The Starrett DataSure 4.0 software application uses a wireless network to gather information from multiple tools. The wireless network relies on the elements or nodes to gather and then relay data back to the PC. The DataSure 4.0 program can also send signals out to the network components to verify transmissions and request data. The hardware components of the system are the: USB Gateway, Remote Gateway, Bridge Extenders, and End Node/s. The End Node is a radio transmitter/receiver attached to a tool. The USB Gateway is a radio transmitter/receiver attached to a PC. The Remote Gateway is the same as the USB Gateway but also extends the communication range from the PC, by using a Bridge extender to boost the signals between the Remote Gateway, and the PC. The Remote Gateway has the same range as the USB Gateway but can be setup very far away from the PC.
Users of DataSure 4.0 can versatilely utilize multiple gateways which serve as central or distributed points for data collection, versus conventional systems that have only one gateway. The compact new gateways and repeaters can easily fit in the palm of a hand. With DataSure 4.0, a new network topology can be configured to many simple or complex situations and distributed remote gateways can also be utilized. DataSure 4.0 features higher bit rates and a very high-speed connection of less than 50ms of data travel time and has an ultralow latency network that enables high data volumes to be processed without delay, even at full capacity.
- Monitors your wireless network, tools, system status, end node battery voltages and tools measurements all from one screen
- Measurements can be initiated and viewed directly from the home page
- Data can be exported in CSV format
- Data is stored on a local or network database with programmable, scheduled backup
- Data is transmitted from gages that have either built-in radio transmitters or externally-mounted end nodes to gateways
- Remote personnel can configure tools, export data and monitor activity via intranet with no additional software
- Virtual multiplexers allow data to be directed from specific tools to multiple software applications
- Each radio end node can be personalized with a descriptive name
- Drag and Drop tools on multiplexers
- Fast and easy label changes for tools
- Fast response for measurement
- System OS Requirements: Windows 7 32 bit, Windows 7 64 bit, Windows 8, Windows 10
- Data can also connect directly to your SPC/MRP/ERP application via com port or DDE (Dynamic Data Exchange) line
- DataSure 4.0 is compatible with all Starrett electronic digital gages, as well as electronic gages of other tool manufacturers - Mitutoyo, Sylvac, CDI Tools, Mahr, Tesa and other tool brands