| INPUT |
| Voltage |
115 / 230 V selectable, ± 10 % variation |
| Frequency |
50/60 Hz ± 5% |
| Fuse |
6.3 A slow blow 250 VAC |
| DIELECTRIC WITHSTAND TEST MODE |
Output Rating
|
3.5 kV @ 30 mAAC
4.0 kV @ 5 mADC |
Voltage Setting
|
Range:
Resolution:
Accuracy: |
0 - 3.50 kVAC
0 - 4.00 kVDC
0.01 kV
± (2% of setting + 5 V) |
Current Display
|
Range:
Resolution:
Accuracy: |
0 - 30.00 mAAC
0 - 5.00 mADC
0.01 mA
± (2% of reading + 0.02 mA) |
HI-Limit
LO-Limit
|
AC
|
Range: 0 - 30.00 mA
Accuracy: ± (2% of setting + 0.02 mA) |
DC
|
Range: 0-5.00 mA
Accuracy: ± (2% of setting + 0.02 mA) |
| Failure Detector |
Audible and Visual |
| DC Output Ripple |
5% Ripple RMS at 6 kVDC @ 5 mA, resistive load |
| Discharge Time |
≤ 200ms |
| Max. Capacitive Load in DC Mode |
1.00 uF |
< 1 kV |
0.50 uF |
< 3 kV |
| 0.75 uF |
< 2 kV |
0.08 uF |
< 4 kV |
| AC Waveform |
Sine Wave, Crest Factor = 1.3 - 1.5 |
| AC Output Frequency |
Range: |
50/60 Hz, user selection |
| Output Regulation |
± (1% of setting + 5 V) from no load to full load |
| Dwell Timer |
Range: |
0, 0.2 - 999.9 sec, (0 = continuous) |
| Ramp Timer |
Range: |
0.1 - 999.9 sec |
| INSULATION RESISTANCE TEST MODE |
Output Voltage
|
Range:
Accuracy: |
100 - 1000 VDC
± (2% of reading + 5 V) |
Resistance Display
|
Range: |
1 - 1000 MΩ (4 digit, auto ranging) |
| Resolution: |
|
500 VDC |
1000 VDC |
| MΩ |
MΩ |
MΩ |
| 0.01 |
1.00 - 40.00 |
1.00 - 80.00 |
| 0.1 |
35.0 - 999.9 |
75.0 - 999.9 |
| HI-Limit/LO-Limit |
Range: |
1 - 1000 MΩ (0 = off) |
| Delay Timer |
Range: |
0, 0.5 - 999.9 sec, (0 = continuous) |
| GROUND BOND TEST MODE |
| Output Voltage |
Range: |
6 VAC fixed |
| Output Frequency |
Range: |
50/60 Hz, user selectable |
| Output Current |
Range: |
3.0 - 30.0 AAC |
| Current Display |
Range: |
0.0 - 30.0 A |
HI-Limit
LO-Limit
|
Range:
Accuracy: |
0 - 510 mΩ for 3.0 - 10.0 A
0 - 200 mΩ for 10.1 - 25.0 A
0 - 150 mΩ for 25.1 - 30.0 A
± (2% of setting + 2 mΩ) |
| Dwell Timer |
Range: |
0, 0.5 - 999.9 sec, (0 = continuous) |
Milliohm Offset
|
Range:
Accuracy: |
0 - 100 mΩ
± (2% of setting + 2 mΩ) |
| RUN TEST MODE |
DUT Power
|
Voltage:
Current: |
0 - 277 VAC Single Phase Unbalanced
0 - 30 A maximum
30 AAC max continuous |
| Voltage Display |
Range: |
0 - 277.0 VAC Full Scale |
Short Circuit Protection
|
Short circuit current 50 A < 3 s
Inrush current 180 A
Response time 10 µs |
| Delay Timer |
Range: |
0.2 - 999.9 seconds |
| Dwell Timer |
Range: |
0, 0.1 - 999.9 seconds (0 = continuous) |
| Timer Display |
Range: |
0 - 999.9 seconds |
| Voltage |
Range: |
0 - 277.0 VAC |
| Current |
Range: |
0 - 30.0 AAC |
| Watts |
Range: |
0 - 8400 W |
| Power Factor |
Range: |
0 - 1.000 |
Leakage Current
|
Range: |
0 - 10.00 mA (0 = off) |
| Leakage current measuring resistor MD=2KΩ ± 1% |
| LEAKAGE CURRENT TEST MODE |
DUT Power
|
Voltage:
Current: |
0 - 277 VAC Single Phase Unbalanced
0 - 30 A maximum
30 AAC max continuous |
| Voltage Display |
Range: |
0 - 277.0 VAC Full Scale |
Short Circuit Protection
|
Short circuit current 50 A < 3s
Inrush current 180 A
Response time 10 µs |
Leakage Current (RMS Only)
|
Range: |
0 µA - 6000 µA |
| Accuracy (DC): |
15 to 100 kHz ± (2% of reading + 3 µA) > 100 k to 1 MHz ± 5% of reading |
Measuring Device
|
A
B
C
F
X |
UL544 Non Patient
IEC60990 Fig4-U2
UL2601-1, UL60601-1
Frequency Check, External MD (1k Ω)
External MD (1k Ω) |
| Line Condition |
Neutral, Reverse, Ground |
| Probe |
G - L |
| HI-Limit/LO-Limit |
Range: |
0 - 6000 µA |
| Delay Timer |
Range: |
0, 1.0 - 999.9 sec, (0 = continuous) |
| GENERAL SPECIFICATIONS |
| Memories |
20 memories with 10 steps per memory |
Remote I/O
|
Input:
Output: |
Test, Reset, Interlock & recall memory 1-6
Pass, Fail, Test-In-Process |
| Interface |
RS-232 interface |
| Security |
Key lock and memory lock capability to avoid unauthorized access |
| Terminations |
6' (1.80 m) high voltage and (2) return leads w/ clips |
| Calibration |
Software & adjustments made through front panel |
| Mechanical |
Bench or rack mount with tilt up front feet |
Environmental
|
Operating Temperature: 32o - 104o F (0o - 40o C)
Relative Humidity: 0 - 80% |
| Dimension (W x H x D) |
16.9" x 5.2" x 19.6" (430 x 133 x 500 mm) |
| Weight |
48.5 lbs. (22 kg) |