|
10M-OCXO-L
|
High accuracy clock source ( Assembled in factory only) |
$1,199.00
|
Add to Cart Request Quote
|
|
10V8-BAT
|
Rechargeable lithium battery |
$201.00
|
Add to Cart Request Quote
|
|
12V-AP-4A
|
AC-DC adapter |
$33.00
|
Add to Cart Request Quote
|
|
2.92F-2.92F-40A
|
2.92mm Female / 2.92mm Female Adapter; 40 GHz |
$530.00
|
Add to Cart Request Quote
|
|
ADP-18
|
Adjustable Differential TDR probe DC~18 GHz |
$1,355.00
|
Add to Cart Request Quote
|
|
ADP-26
|
Adjustable Differential TDR probe DC~26.5 GHz |
$1,575.00
|
Add to Cart Request Quote
|
|
AMK-SSA3000X
|
Advanced measurement kit, including ACPR, CHPower, OBW and so on. (SW) |
$475.00
|
Add to Cart Request Quote
|
|
ANT-DA1
|
Directional Antenna Suit, N type, ANT-DA11 antenna (10MHz~200MHz), ANT-DA12 antenna (200MHz~500MHz) ANT-DA13 antenna (500MHz~8GHz), Amplifier handle 12dB@1GHz(typ.) |
$7,614.00
|
Add to Cart Request Quote
|
|
ANT-DA11
|
Contains amplifier handle and 10MHz ~ 200MHz antenna. Antenna gain 10dB (typical value); SWR <1:1.9 (typical value); 50 Ohm /N type, female; polarization direction horizontal and vertical |
$3,080.00
|
Add to Cart Request Quote
|
|
ANT-DA12
|
Contains amplifier handle and 200MHz ~ 500MHz antenna. Antenna gain 10dB (typical value); SWR <1:1.9 (typical value); 50 Ohm /N type, female; polarization direction horizontal and vertical |
$3,065.00
|
Add to Cart Request Quote
|
|
ANT-DA13
|
Contains amplifier handle and 500MHz ~ 8GHz antenna. Antenna gain 10dB (typical value); SWR <1:1.9 (typical value); 50 Ohm /N type, female; polarization direction horizontal and vertical |
$3,673.00
|
Add to Cart Request Quote
|
|
ANT-GPS1
|
GPS antenna, SMA(M), 100cm |
$20.00
|
Add to Cart Request Quote
|
|
ASP-18
|
Adjustable Single-end TDR probe DC~18 GHz |
$1,245.00
|
Add to Cart Request Quote
|
|
ASP-26
|
Adjustable Single-end TDR probe DC~26.5 GHz |
$1,465.00
|
Add to Cart Request Quote
|
|
ATT-20dB
|
20 dB Attenuator |
$60.00
|
Add to Cart Request Quote
|
|
BAG-H1
|
Soft Carry Case for SHS800X/SHS1000X |
$45.00
|
Add to Cart Request Quote
|
|
BAG-H2
|
Portable bag |
$80.00
|
Add to Cart Request Quote
|
|
BAG-S1
|
Soft Carry Case for SDS1000DL+/CML+, SDS1000X, SDS1000X-E, SDS2000X-E Series |
$65.00
|
Add to Cart Request Quote
|
|
BAG-S2
|
Soft Carry Case for SDS2000X, SDS2000X Plus, SDS2000X HD, SDS5000X, SSA3000X SVA1000X, SSA3000X-R, SSA3000X Plus |
$145.00
|
Add to Cart Request Quote
|
|
BAG-S3 |
Soft Carry Bag for SAP probes, UkitSSA3X, RB3X25 |
N/A |
Discontinued |
|
BAG-SCC |
Soft carrying bag |
N/A |
Discontinued Replaced by: BAG-S1 |
|
CASE-S1
|
Hard transport case for SNA5000, SSA5000, SDS6000 series |
$465.00
|
Add to Cart Request Quote
|
|
CP4020
|
Bandwidth: 200KHz; Maximum continuous current 20Arms; Peak current 60A; Switching ratio: 50mV/A; 5mV/A; DC measurement accuracy: 50mV/A (0.4A-10ApK) 2%; 5mV/A (1A-60ApK) 2%; 9V battery-powered |
$465.00
|
Add to Cart Request Quote
|
|
CP4050
|
Bandwidth: 1MHz; Maximum continuous current 50Arms; Peak current 140A; Switching ratio: 500mV/A; 50mV/A; DC measurement measurement accuracy: 500mV/A (20mA-14ApK) 3% 20mA; 50mV/A (200mA-100ApK ) 4% 200mA; 50mV/A (100A-140ApK) 15% max; 9V battery-powered |
$1,145.00
|
Add to Cart Request Quote
|
|
CP4060 |
Battery-powered, 100KHz, 400mA 60A |
N/A |
Discontinued Replaced by: CP4020 |
|
CP4070
|
Bandwidth: 300KHz; Maximum continuous current 70Arms;Peak current 200A;Switching ratio 50mV/A 5mV/A;DC measurement accuracy: 50mV/A 0.4A-10ApK 2% 5mV/A 1A-200ApK) 2%;9V battery-powered |
$705.00
|
Add to Cart Request Quote
|
|
CP4070A
|
Bandwidth: 300KHz; Maximum continuous current 70Arms; Peak current 200A;Switching ratio 100mV/A 10mV/A;DC measurement accuracy 100mV/A 50mA-10ApK 3% 50mA 10mV/A (500mA-40ApK 4% 50mA 10mV/A (40A-200ApK 15%max; 9V battery-powered |
$795.00
|
Add to Cart Request Quote
|
|
CP4200 |
Battery-powered, 150KHz, 400mA 200A |
N/A |
Discontinued Replaced by: CP4070 |
|
CP5030 |
Bandwidth: 50MHz; Maximum continuous current 30Arms; Peak current 50A;Switching ratio 5A/30A; Accuracy 5A( 1% 1mA);30A( 1% 10mA); Standard DC12V/1.2A power adapter |
N/A |
Discontinued Replaced by: RP1003C |
|
CP5030A |
Bandwidth: 100MHz; Maximum continuous current 30Arms; Peak current 50A; Switching ratio 5A/30; Accuracy 5A( 1% 1mA);30A( 1% 10mA); Standard DC12V/1.2A power adapter |
N/A |
Discontinued Replaced by: RP1004C |
|
CP5050 |
Power supply, 40MHz, the maximum continuous current 30Arms, peak current 50A, 1 accuracy |
N/A |
Discontinued Replaced by: RP1003C |
|
CP5150 |
Bandwidth: 12MHz; Maximum continuous current 150Arms; Peak current 300A; Switching ratio: 30A/150A; Accuracy 30A( 1% 10mA);150A( 1% 100mA); Standard DC12V/1.2A power adapter |
N/A |
Discontinued Replaced by: RP1005C |
|
CP5300 |
Power supply, 12MHz, the maximum continuous current 150Arms, peak current 300A, 1 accuracy |
N/A |
Discontinued Replaced by: RP1002C |
|
CP5500 |
Bandwidth: 5MHz; Maximum continuous current 500Arms; Peak current750A; Switching ratio:75A/500A; Accuracy 75A( 1% 10mA);500A( 1% 100mA); Standard DC12V/1.2A power adapter |
N/A |
Discontinued Replaced by: RP1002C |
|
CP6030
|
Bandwidth: 50MHz; Maximum continuous current 30Arms; Peak current 50A;Switching ratio 5A/30A; Accuracy 5A( 1% 1mA);30A( 1% 10mA); Standard DC12V/1A power adapter |
$2,285.00
|
Add to Cart Request Quote
|
|
CP6030A
|
Current Probe (DC-100MHz) |
$3,205.00
|
Add to Cart Request Quote
|
|
CP6150
|
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A; Switching ratio: 30 A/150 A; Accuracy: 30 A( 1% 10 mA); 150 A( 1% 100 mA); Standard DC12 V/1 A power adapter |
$4,299.00
|
Add to Cart Request Quote
|
|
CP6500
|
Bandwidth: 5 MHz; Maximum continuous current 500 Arms; Peak current 750 A; Switching ratio: 75 A/500 A; Accuracy: 75 A( 1% 10 mA); 500 A( 1% 100 mA); Standard DC12 V/1 A power adapter |
$5,990.00
|
Add to Cart Request Quote
|
|
CPL5100
|
Bandwidth: DC-600 kHz ; Current Range: L(50mA~10A Peak), H(1A~100A Peak); Attenuation accuracy L(0.1V/A), H(0.01V/A); Typical DC precision: L(3% 50mA), H(500mA~40A Peak 4% 50mA 40A~100A Peak 15% Maximum); Rise Time: 583ns; Operating voltage RMS: CATI 600V CATII 600V CATIII 300V; 9V alkaline layer-built battery/ 15H |
$465.00
|
Add to Cart Request Quote
|
|
DBT-50
|
Adjustable Pin Head, SMP interface, connected to the probe amplifier |
$750.00
|
Add to Cart Request Quote
|
|
DF2001A
|
Deskew fixture for voltage and current probes |
$265.00
|
Add to Cart Request Quote
|
|
DIG-LVDS
|
Digital Bus Kit-LVDS (Without RF cables) |
$959.00
|
Add to Cart Request Quote
|
|
DIG-LVDS-2
|
Digital Bus Kit-LVDS (With 32 RF cables) |
$1,359.00
|
Add to Cart Request Quote
|
|
DIG-LVTTL
|
Digital Bus Kit-LVTTL |
$959.00
|
Add to Cart Request Quote
|
|
DPB 4080 |
Bandwidth: 50 MHz; Maximum input differential voltage 800 V DC + Peak AC); Range selection (attenuation ratio):10X/100X; Accuracy: 1%; Standard DC 9 V / 1 A power adapter |
N/A |
Discontinued Replaced by: RP1050D |
|
DPB1300
|
Bandwidth: 50MHz; Rise Time 7ns; DC Accuracy 2%; Max Input: 600 V CATIII, 1000 V CATII; Max Differential Test Voltage (DC + Peak AC): 50 X: 130 V, 500 X: 1300 V. Input impedance/capacitance: 5 M Ohm /<4 pF(Single-ended), 10 M Ohm /< 2 pF(Two inputs); DC 12 V/1.2 A Power |
$489.00
|
Add to Cart Request Quote
|
|
DPB3050 |
50MHz, + /-800Vp-p, error of 2, 10X/100X attenuation |
N/A |
Discontinued Replaced by: RP1050D |
|
DPB4050 |
50MHz, 6.5KV, error of 2, 100X/200X/500X/1000X attenuation |
N/A |
Discontinued Replaced by: DPB5700 |
|
DPB5150
|
Bandwidth: 70MHz; Maximum input differential voltage 1500V DC + Peak AC); Range selection (attenuation ratio): 50X/500X; Accuracy: 2%; Standard 5V/1A USB power adapter |
$930.00
|
Add to Cart Request Quote
|
|
DPB5150A
|
Bandwidth: 100MHz; Maximum input differential voltage 1500V DC + Peak AC ;Range selection (attenuation ratio): 50X/500X; Accuracy: 2%; Standard 5V/1A USB power adapter |
$1,210.00
|
Add to Cart Request Quote
|
|
DPB5700
|
Bandwidth: 70MHz; Maximum input differential voltage 7000V DC + Peak AC ;Range selection (attenuation ratio): 100X/1000X; Accuracy: 2%; Standard 5V/1A USB power adapter |
$1,790.00
|
Add to Cart Request Quote
|
|
DPB5700A
|
Bandwidth: 100MHz; Maximum input differential voltage 7000V DC + Peak AC ;Range selection (attenuation ratio): 100X/1000X; Accuracy: 2%; Standard 5V/1A USB power adapter |
$2,330.00
|
Add to Cart Request Quote
|
|
EMI-SSA3000X
|
EMI easurement kit (SW) |
$565.00
|
Add to Cart Request Quote
|
|
F503FE
|
Mechanical Calibration Kit: OSLT, DC - 4.5 GHz, N-Female connector |
$399.00
|
Add to Cart Request Quote
|
|
F503ME
|
Mechanical Calibration Kit: Open(M), Short(M), Match(M,50), Through(F-F), 4.5 GHz |
$399.00
|
Add to Cart Request Quote
|
|
F504FS
|
Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Female connector |
$1,415.00
|
Add to Cart Request Quote
|
|
F504MS
|
Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male connector |
$1,415.00
|
Add to Cart Request Quote
|
|
F504TS
|
Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male and Female connector |
$2,439.00
|
Add to Cart Request Quote
|
|
F505TS
|
Mechanical Calibration Kit: OSLT, DC - 18 GHz, N-Male and Female connector |
$5,066.00
|
Add to Cart Request Quote
|
|
F603FE
|
Mechanical Calibration Kit: Open(M), Short(M), Match(M,50), Through(F-F), 4.5 GHz, SMA-type |
$449.00
|
Add to Cart Request Quote
|
|
F603ME
|
Mechanical Calibration Kit: OSLT, DC - 4.5 GHz, 3.5mm SMA-Male connector |
$449.00
|
Add to Cart Request Quote
|
|
F604FS
|
Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5mm SMA-Female connector |
$1,855.00
|
Add to Cart Request Quote
|
|
F604MS
|
Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5mm SMA-Male connector |
$1,855.00
|
Add to Cart Request Quote
|
|
F604TS
|
Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5mm-Male and Female connector |
$3,695.00
|
Add to Cart Request Quote
|
|
F606TS
|
Mechanical Calibration Kit: OSLT, DC - 27 GHz, 3.5mm-Male and Female connector |
$4,770.00
|
Add to Cart Request Quote
|
|
FC1
|
Protective Cover for SNA5000A, SDS6000A, SSA5000A |
$125.00
|
Add to Cart Request Quote
|
|
FX-AMETH
|
100Base-T1 and 1000Base-T1 compliance test fixture |
$1,105.00
|
Add to Cart Request Quote
|
|
FX-ETH
|
100Base-TX and 1000Base-T compliance test fixture |
$1,105.00
|
Add to Cart Request Quote
|
|
FX-USB2
|
USB 2.0 test fixture |
$1,105.00
|
Add to Cart Request Quote
|
|
GSCH4000A
|
Smart Battery Charger for SHS800X/SHS1000X Series |
$229.00
|
Add to Cart Request Quote
|
|
HPB4010
|
Bandwidth: 40MHz; Maximum input differential voltage DC 10KV; AC rms 7KV sine ;AC Vpp 20KV Pulse ; attenuation ratio1:1000; Accuracy 3% |
$525.00
|
Add to Cart Request Quote
|
|
HPB4015 |
50MHz, DC: 15KV, AC Rms: 10KV, AC peak30KV, attenuation ratio of 1:1000, single-ended |
N/A |
Discontinued Replaced by: HPB4010 |
|
ISFE |
USB 5 V power supply, plug and play, the maximum input voltage 600 Vp-p, floating test. Work with oscilloscopes. |
N/A |
Discontinued |
|
KWR42A
|
18~26.5 GHz waveguide cal.kit |
$5,450.00
|
Add to Cart Request Quote
|
|
LPA10 |
SDS5000X Series Active Probe Adapter, Bandwidth 4GHz, support Lecroy ZD1000, ZD1500, AP034 and AP033. |
N/A |
Discontinued |
|
MSO2072 |
70MHz; 2 channels; 2GSa/s; 28M memory depth; 110,000wfm/s waveform capture rate; 8'' display(800480 pixels); SPO technology |
N/A |
Discontinued |
|
MSO2074 |
Bandwidth (MHZ): 70, Channels: 4, Waveform capture rate (wfm/s): 110, Display: 8", Samplerate (Sa/s): 2G, Memory depth (pts): 28M. |
N/A |
Discontinued |
|
MSO2102 |
100MHz; 2 channels; 2GSa/s; 28M memory depth; 110,000wfm/s waveform capture rate; 8'' display(800480 pixels); SPO technology |
N/A |
Discontinued |
|
MSO2104 |
100MHz; 4 channels; 2GSa/s; 28M memory depth; 110,000wfm/s waveform capture rate; 8'' display(800480 pixels); SPO technology |
N/A |
Discontinued |
|
MSO2202 |
200MHz; 2 channels; 2GSa/s; 28M memory depth; 110,000wfm/s waveform capture rate; 8'' display(800480 pixels); SPO technology |
N/A |
Discontinued |
|
MSO2204 |
200MHz; 4 channels; 2GSa/s; 28M memory depth; 110,000wfm/s waveform capture rate; 8'' display(800480 pixels); SPO technology |
N/A |
Discontinued |
|
MSO2302 |
300MHz; 2 channels; 2GSa/s; 28M memory depth; 110,000wfm/s waveform capture rate; 8'' display(800480 pixels); SPO technology |
N/A |
Discontinued |
|
MSO2304 |
300MHz; 4 channels; 2GSa/s; 28M memory depth; 110,000wfm/s waveform capture rate; 8'' display(800480 pixels); SPO technology |
N/A |
Discontinued |
|
N-BNC-12L |
N-BNC cable, 12GHz bandwidth |
N/A |
Discontinued Replaced by: DSA Utility Kit |
|
N-BNC-2L
|
N-BNC cable, 2 GHz bandwidth |
$45.00
|
Add to Cart Request Quote
|
|
N-BNC-6L |
N-BNC cable, 6GHz bandwidth |
N/A |
Discontinued |
|
N-N-12L |
N-N cable, 12GHz bandwidth |
N/A |
Discontinued Replaced by: N-N-18L |
|
N-N-18L
|
N(M)-N(M) cable, 18 GHz |
$295.00
|
Add to Cart Request Quote
|
|
N-N-6L
|
N-N cable, 6 GHz bandwidth |
$55.00
|
Add to Cart Request Quote
|
|
NSD28
|
Noise source driver(hardware), connect spectrum analyzer to noise source |
$139.00
|
Add to Cart Request Quote
|
|
N-SMA-12L |
N-SMA cable, 12GHz bandwidth |
N/A |
Discontinued Replaced by: N-SMA-18L |
|
N-SMA-18L
|
N(M)-SMA(M) cable, 18 GHz |
$295.00
|
Add to Cart Request Quote
|
|
N-SMA-6L
|
N-SMA cable, 6 GHz bandwidth |
$55.00
|
Add to Cart Request Quote
|
|
Option Pack |
SDS2000 Series Option Pack - Includes: SDS-2000-FG 25MHZ Function/Arb. Generator option, SDS-2000-LA 8-channel, 500MSa/s Logic Analyzer Option, SDS-2000-DC IIC, SPI, UART/RS232, CAN, LIN decoding option
|
N/A |
Discontinued |
|
PAK1
|
Probe Accessories Kit for PB470, PP510, PP215, PP430, SP2030A, SP2035A, SP2035 |
$10.00
|
Add to Cart Request Quote
|
|
PAK2
|
Probe Accessories Kit for SP3050A |
$20.00
|
Add to Cart Request Quote
|
|
PB470
|
1X/10X attenuation, 85/18pf, 1M/10Mohm, 6M/70MHz, 150V/300V RMS CAT II, operating temperature -15 to 55 degrees |
$20.00
|
Add to Cart Request Quote
|
|
PB830 |
10X CAT II 400V, 300M-bandwidth, SHS1000 handheld oscilloscope standard |
N/A |
Discontinued |
|
PB925
|
10X CAT II 1000V, CAT III 600V, 250M-bandwidth, SHS1000 handheld oscilloscope standard |
$115.00
|
Add to Cart Request Quote
|
|
PP215
|
1X/10X attenuation, 85/16pf, 1M/10Mohm, 6M/200MHz, 150V/300V RMS CAT II, operating temperature -15 to 55 degrees |
$39.00
|
Add to Cart Request Quote
|
|
PP301
|
3D Positioner |
$450.00
|
Add to Cart Request Quote
|
|
PP430 |
1X/10X attenuation, 46/12pf, 1M/10Mohm, 10M/300MHz, 300V/600V, operating temperature -15 to 40 degrees |
N/A |
Discontinued |
|
PP510
|
1X/10X attenuation, 85/18pf, 1M/10Mohm, 6M/100MHz, 150V/300V RMS CAT II, operating temperature -15 to 55 degrees |
$29.00
|
Add to Cart Request Quote
|
|
RB3X25
|
RB (1 MHz~2.5 GHz), N (M) -N (M) adaptor (2 pcs), for SSA3000X, SSA3000X Plus, SSA3000X-R series |
$450.00
|
Add to Cart Request Quote
|
|
RBSSA3X20 |
Refl-SSA3000X, RB (1 MHz2 GHz), N (M) -N (M) adaptor (2 pcs) |
N/A |
Discontinued Replaced by: RBSSA3X25 |
|
RBSSA3X25
|
Bridge and software package - SSA3000-REFL (SW) and RB3X25 (HW) for SSA3000X, SSA3000X Plus, SSA3000X-R series |
$670.00
|
Add to Cart Request Quote
|
|
RBSSA3XP25
|
SSA3000-Refl(SW) and RB3X25(HW), for SSA3000X Plus Series |
$670.00
|
Add to Cart Request Quote
|
|
RRC2057
|
7.2V 6900mAh, SHS800X, SHS1000X battery |
$149.00
|
Add to Cart Request Quote
|
|
S06-NMSF-1M
|
N(M)-SMA(F) RF Cable DC~6 GHz,1000 mm |
$55.00
|
Add to Cart Request Quote
|
|
S18-NMSF-1M
|
N(M)-SMA(F) RF Cable DC~18 GHz,1000 mm |
$295.00
|
Add to Cart Request Quote
|
|
S40-29M29F-1M
|
2.92 mm(M)- 2.92 mm (F) RF Cable DC~40 GHz,1000 mm |
$509.00
|
Add to Cart Request Quote
|
|
SAG1021I
|
Isolated USB function/arbitrary waveform generator 125 Msa/s 16 kpts Arb Wave Length Insulation Voltage, 42 Vpk Hardware |
$285.00
|
Add to Cart Request Quote
|
|
SAP1000
|
Active Probe, 1 GHz |
$999.00
|
Add to Cart Request Quote
|
|
SAP1-kit
|
Probe Kit for SAP1000, SAP2500 |
$279.00
|
Add to Cart Request Quote
|
|
SAP2500
|
Active Probe, 2.5 GHz |
$1,689.00
|
Add to Cart Request Quote
|
|
SAP2500D
|
Differential Active Probe, 2.5 GHz |
$2,689.00
|
Add to Cart Request Quote
|
|
SAP2-kit
|
Probe kits for SAP2500D, including Straight Tip *5, Pogo Tip *5, Swivel Tip *2, Tip Saver *2, Y Lead Adapter *2, Right Angle Pin Lead 5cm * 1 Straight Pin Lead 6 cm * 1 Straight Pin Lead12 cm * 1 Spring loaded Ground (Short) * 2 Springloaded Ground (Long) * 2 Solder in Lead * 2 Channel ID Clips(Set of 4 colors) *1 |
$329.00
|
Add to Cart Request Quote
|
|
SAP4000P
|
4 GHz power rail probe; low frequency resistance 20 k Ohm ; high frequency resistance 50 Ohm ; offset voltage range 24 V; attenuation ratio 1.1:1; dynamic range 600 mV |
$4,529.00
|
Add to Cart Request Quote
|
|
SAP5000D
|
Differential Active Probe, 5 GHz |
$3,689.00
|
Add to Cart Request Quote
|
|
SAP5-DRP45
|
Includes 1 socketed head DRP-45, 2 swivel tips, 5 straight tips, 5pogo tips |
$750.00
|
Add to Cart Request Quote
|
|
SAP5-DSI50
|
Includes 1 solder-in head DSI-50,20 lead resistors, 1 meter of silver wire. |
$450.00
|
Add to Cart Request Quote
|
|
SAP5-KIT
|
Includes 20 lead resistors, 1 10 cm ground wire, 1 meter of silverwire, 2 swivel tips, 5 straight tips, 5 pogo tips, 1 set of color rings, and 10 pieces of 3M double-sided tape. |
$290.00
|
Add to Cart Request Quote
|
|
SAP5-SRP45
|
Includes 1 socketed head SRP-45, 2 swivel tips, 5 straight tips, 5pogo tips |
$750.00
|
Add to Cart Request Quote
|
|
SAP5-SSI50
|
Includes 1 solder-in head SSI-50,20 lead resistors, 1 meter of silver wire. |
$450.00
|
Add to Cart Request Quote
|
|
SAP-PT
|
Pogo Tip for SAP1000, SAP2500, SAP2500D (5 Pcs) |
$35.00
|
Add to Cart Request Quote
|
|
SAP-ST1
|
5 pcs in a box, Straight Tip, for SAP1000, SAP2500 SAP2500D The straight tip is rugged and designed for general probing. Fits in either probe socket. |
$50.00
|
Add to Cart Request Quote
|
|
SCD10A
|
SHS800X, SHS1000X current measurement accessory, 10 A range |
$19.00
|
Add to Cart Request Quote
|
|
SCD30A
|
Digital multimeter 30A current shunt, 1mV/A, DC ~ 1 kHz 0.3%, 1 kHz ~ 5 kHz 5%, 30Vac RMS MAX, 60Vdc MAX (only compatible with SDM series multimters which are 5 1/2 or above) |
$98.00
|
Add to Cart Request Quote
|
|
SCD600mA
|
SHS800X, SHS1000X current measurement accessory, 600 mA range |
$19.00
|
Add to Cart Request Quote
|
|
SCP5030
|
Bandwidth: 50MHz; Maximum continuous current 30Arms; Peak current 50A;Switching ratio 5A/30A; Accuracy 5A( 1% 1mA);30A( 1% 10mA); Powered by oscilloscope through SAPBUS interface |
$2,280.00
|
Add to Cart Request Quote
|
|
SCP5030A
|
Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50 A; Switching ratio: 5 A/30; Accuracy: 5 A( 1% 1 mA); 30 A( 1% 10 mA); Powered by oscilloscope through SAPBUS interface |
$2,980.00
|
Add to Cart Request Quote
|
|
SCP5150
|
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A; Switching ratio: 30 A/150 A; Accuracy: 30 A( 1% 10 mA); 150 A( 1% 100 mA); Powered by oscilloscope through SAPBUS interface |
$3,680.00
|
Add to Cart Request Quote
|
|
SCP5500
|
Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750 A; Switching ratio: 75 A/500 A; Accuracy: 75 A( 1% 10 mA); 500 A( 1% 100 mA); Powered by oscilloscope through SAPBUS interface |
$5,980.00
|
Add to Cart Request Quote
|
|
SDG1005 |
5MHz; 2 channels; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform output amplitude:4mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG810 |
|
SDG1010 |
10MHz; 2 channels; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform output amplitude:4mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG1032X |
|
SDG1020 |
20MHz; 2 channels; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform output amplitude:4mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG1032X |
|
SDG1025 |
25MHz; 2 channels; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform output amplitude:4mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG1032X |
|
SDG1032X
|
30MHz; 2 channels; 150MSa/s; wave length: 16Kpts; function/arbitrary waveform outputamplitude:4mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst);frequency counter function |
$359.00
|
Add to Cart Request Quote
|
|
SDG1050 |
50MHz; 2 channels; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform output amplitude:4mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG1032X |
|
SDG1062X
|
60MHz; 2 channels; 150MSa/s; wave length: 16Kpts; function/arbitrary waveform outputamplitude:4mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst);frequency counter function |
$490.00
|
Add to Cart Request Quote
|
|
SDG2042X
|
40MHz; 2 channels; 1.2GSa/s; wave length: 8pts-8Mpts function/arbitrary waveform output; EasyPulse technology amplitude:2mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst);frequency counter function |
$499.00
|
Add to Cart Request Quote
|
|
SDG2042X-OB |
40MHz; 2 channels; 1.2GSa/s; wave length: 8pts-8Mpts function/arbitrary waveform output; EasyPulse technology amplitude:2mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst);frequency counter function - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: DG1062Z |
|
SDG2082X
|
80MHz; 2 channels; 1.2GSa/s; wave length: 8pts-8Mpts function/arbitrary waveform output; EasyPulse technology amplitude:2mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst);frequency counter function |
$619.00
|
Add to Cart Request Quote
|
|
SDG2122X
|
120MHz; 2 channels; 1.2GSa/s; wave length: 8pts-8Mpts function/arbitrary waveform output; EasyPulse technology amplitude:2mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst);frequency counter function |
$899.00
|
Add to Cart Request Quote
|
|
SDG-2-RMK
|
Rackmount kit for two intruments, SDG800, SDG1000X, SDG2000X, SDG5000, SDG6000X series generators and SDM digital multimeters; Height 3U |
$99.00
|
Add to Cart Request Quote
|
|
SDG5082 |
80MHz; 2 channels; 500MSa/s; wave length: CH1 16Kpts, CH2 512Kpts; function/arbitrary waveform output; EasyPulse technology amplitude:2mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG2082X |
|
SDG5122 |
120MHz; 2 channels; 500MSa/s; wave length: CH1 16Kpts, CH2 512Kpts; function/arbitrary waveform output; EasyPulse technology amplitude:2mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG2122X |
|
SDG5162 |
160MHz; 2 channels; 500MSa/s; wave length: CH1 16Kpts, CH2 512Kpts; function/arbitrary waveform output; EasyPulse technology amplitude:2mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst);frequency counter function |
N/A |
Discontinued Replaced by: SDG6022X |
|
SDG-6000X-IQ
|
IQ Signal Generator Function (SW) |
$675.00
|
Add to Cart Request Quote
|
|
SDG6022X
|
200 MHz; 2 channels; 2.4 GSa/s;16 bit; Arb-Waveform length: 2~20 Mpts; function/arbitrary waveform output; EasyPulse and TrueArb technology; modulation function (AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst); frequency counter function, PRBS generator; IQ signal generator (Optional) |
$1,525.00
|
Add to Cart Request Quote
|
|
SDG6032X
|
350MHz; 2 channels; 2.4GSa/s;16bit; Arb-Waveform length: 2~20Mpts; function/arbitrary waveform output; EasyPulse and TrueArb technology; modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst); frequency counter function, PRBS generator; IQ signal generator (Optional) |
$3,510.00
|
Add to Cart Request Quote
|
|
SDG6052X
|
500MHz; 2 channels; 2.4GSa/s;16bit; Arb-Waveform length: 2~20Mpts; function/arbitrary waveform output; EasyPulse and TrueArb technologymodulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst); frequency counter function;PRBS generator; IQ signal generator (Optional) |
$5,490.00
|
Add to Cart Request Quote
|
|
SDG-7000A-BW05
|
350 MHz to 500 MHz bandwidth upgrade (software |
$3,380.00
|
Add to Cart Request Quote
|
|
SDG-7000A-BW10
|
500 MHz to 1 GHz bandwidth upgrade (software |
$5,720.00
|
Add to Cart Request Quote
|
|
SDG-7000A-IQ
|
IQ Signal Generator Activation License |
$2,999.00
|
Add to Cart Request Quote
|
|
SDG7032A
|
350MHz; 2 differential/single ended output channels; 5 GSa/s sampling rate; 14-bit vertical resolution; Arb-Waveform length: 64 pts ~ 512 Mpts; 5 inch touch screen |
$11,389.00
|
Add to Cart Request Quote
|
|
SDG7052A
|
500MHz; 2 differential/single ended output channels; 5 GSa/s sampling rate; 14-bit vertical resolution; Arb-Waveform length: 64 pts ~ 512 Mpts; 5 inch touch screen |
$12,590.10
|
Add to Cart Request Quote
|
|
SDG7102A
|
1GHz; 2 differential/single ended output channels; 5 GSa/s sampling rate; 14-bit vertical resolution; Arb-Waveform length: 64 pts ~ 512 Mpts; 5 inch touch screen |
$18,389.00
|
Add to Cart Request Quote
|
|
SDG805 |
5MHz; 1 channel; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform output amplitude:4mV 20Vpp (high impedance); modulation function(AM,DSB-AM,FM,PM,ASK,FSK,PWM,Sweep,Burst),EasyPulse technology |
N/A |
Discontinued Replaced by: SDG810 |
|
SDG810
|
10MHz; 1 channel; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform outputamplitude:4mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst), EasyPulse technology |
$239.00
|
Add to Cart Request Quote
|
|
SDG810-OB |
10MHz; 1 channel; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform outputamplitude:4mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst), EasyPulse technology - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: DG812 , SDG810 |
|
SDG830
|
30MHz; 1 channel; 125MSa/s; wave length: 16Kpts; function/arbitrary waveform outputamplitude:4mV ~ 20Vpp (high impedance); modulation function(AM, DSB-AM, FM, PM, ASK, FSK, PWM, Sweep, Burst), EasyPulse technology |
$269.00
|
Add to Cart Request Quote
|
|
SDG-BNC
|
BNC Coaxial Cable, 40" |
$15.00
|
Add to Cart Request Quote
|
|
SDG-RMK
|
Rackmount kit, compatible with SDG800, SDG1000X, SDG2000X, SDG5000, SDG6000X series generators and SDM digital multimeters, SDL1000X load; Height 3U |
$139.00
|
Add to Cart Request Quote
|
|
SDG-RMK-OB |
Rackmount kit, compatible with SDG800, SDG1000X, SDG2000X, SDG5000, SDG6000X series generators and SDM digital multimeters, SDL1000X load; Height 3U - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: RM-DS1000Z/DG4000 , SDG-RMK |
|
SDL1020X
|
200W DC150V/30A CC Dynamic Mode 25KHz current rise time range 0.001-2.5A/us; 0.1mV/0.1mA;3.5' TFT-LCD; RS232/USB/LAN/GPIB |
$695.00
|
Add to Cart Request Quote
|
|
SDL1020X-E
|
200W DC150V/30A CC Dynamic Mode 25KHz current rise time range 0.001-2.5A/us; 1mV/1mA;3.5' TFT-LCD; RS232/USB/LAN/GPIB |
$499.00
|
Add to Cart Request Quote
|
|
SDL1020X-E-OB |
200W DC150V/30A CC Dynamic Mode 25KHz current rise time range 0.001-2.5A/us; 1mV/1mA;3.5'' TFT-LCD; RS232/USB/LAN/GPIB - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: SDL1020X-E |
|
SDL1030X
|
300W DC150V/30A CC Dynamic Mode 25KHz current rise time range 0.001-2.5A/us; 0.1mV/0.1mA;3.5' TFT-LCD; RS232/USB/LAN/GPIB |
$1,145.00
|
Add to Cart Request Quote
|
|
SDL1030X-E
|
300W DC150V/30A CC Dynamic Mode 25KHz current rise time range 0.001-2.5A/us; 1mV/1mA;3.5' TFT-LCD; RS232/USB/LAN/GPIB |
$880.00
|
Add to Cart Request Quote
|
|
SDL-Cable
|
30 A Test Lead |
$30.00
|
Add to Cart Request Quote
|
|
SDM3045X
|
4.5 digit; up to 150 rdgs/s measurement speed; 4.3 inch (480 * 272) TFT-LCD display; True RMS AC voltage and AC current measurements; supports GPIB interface |
$399.00
|
Add to Cart Request Quote
|
|
SDM3055
|
5 1/2 digit; 150rdgs / s measurement speed; 4.3 inch (480 272) true color TFT-LCD screen display; True RMS AC voltage and AC current measurements |
$499.00
|
Add to Cart Request Quote
|
|
SDM3055A |
5 1/2 digit; 150rdgs / s measurement speed; 4.3 inch (480 272) true color TFT-LCD screen display; True RMS AC voltage and AC current measurements; supports GPIB interface |
N/A |
Discontinued Replaced by: SDM3055 |
|
SDM3055-SC
|
SDM3055+Scanner Card SC1016 |
$745.00
|
Add to Cart Request Quote
|
|
SDM3065X
|
6 -digit; 10000rdgs/s sampling speed; 4.3 inch (480 * 272) true color TFT-LCD screen display; True RMS AC voltage and AC current measurements; supports GPIB interface, Scanner card |
$745.00
|
Add to Cart Request Quote
|
|
SDM3065X-SC
|
SDM3065X+Scanner Card SC1016 |
$995.00
|
Add to Cart Request Quote
|
|
SDM-PB
|
one pair of multimeter pen test leads (1000 V), (Accessory for SDM3000 ) |
$20.00
|
Add to Cart Request Quote
|
|
SDS1000-SC2 |
Soft Carry Case for all SDS1000 series DL/CML/CNL Scopes |
N/A |
Discontinued Replaced by: BAG-S1 |
|
SDS1000-SC4 |
Soft Carry Case for all SDS1000 CFL scopes |
N/A |
Discontinued Replaced by: BAG-S2 |
|
SDS-1000X-DC |
Serial Decode Package. Includes I2C, SPI, UART/RS232, CAN, LIN buses (Software key will be sent via email) |
N/A |
Discontinued |
|
SDS1000X-E-WIFI |
Wireless communication function (SW) |
N/A |
Discontinued |
|
SDS1000XHD-PA
|
Power Analysis (software) |
$335.00
|
Add to Cart Request Quote
|
|
SDS-1000X-LA |
MSO function (SW) |
N/A |
Discontinued |
|
SDS-1000X-PA |
Power Analysis option |
N/A |
Discontinued |
|
SDS1022DL |
25MHz; 2 channels; 500MSa/s; 32K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1052DL+ |
|
SDS1052DL |
50MHz; 2 channels; 500MSa/s; 32K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1202X-E |
|
SDS1052DL+
|
50MHz; 2 channels; 500MSa/s; 32K memory depth; 7 inch display(8*16div); Support USBTMC protocaol and SCPI command |
$289.00
|
Add to Cart Request Quote
|
|
SDS1052DL+-OB |
50MHz; 2 channels; 500MSa/s; 32K memory depth; 7 inch display(8*16div); Support USBTMC protocaol and SCPI command -This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: SDS1052DL+ |
|
SDS1072CFL |
70MHz; 2 channels; 2GSa/s; 24K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1202X-E |
|
SDS1072CML |
70MHz; 2 channels; 1GSa/s; 2M memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1202X-E |
|
SDS1072CNL |
70MHz; 2 channels; 1GSa/s; 18K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1202X-E |
|
SDS1074CFL |
70MHz; 4 channels; 2GSa/s; 24K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1104X-U |
|
SDS1102CFL |
100MHz; 2 channels; 2GSa/s; 24K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1202X-E |
|
SDS1102CML+
|
100MHz; 2 channels; 1GSa/s; 2M memory depth; 7 inch display(8*16div); Support USBTMC protocaol and SCPI command |
$319.00
|
Add to Cart Request Quote
|
|
SDS1102CML+-OB |
100 MHz; 2 channels; 1 GSa/s; 2 Mpts memory depth; 7 inch display (8*16div); Support USBTMC protocaol and SCPI command - This open box item may be missing original packaging, missing some small accessories or a lightly used demo unit. |
N/A |
Discontinued Replaced by: SDS1102CML+ |
|
SDS1102CNL |
100MHz; 2 channels; 1GSa/s; 18K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1202X-E |
|
SDS1102DL |
100MHz; 2 channels; 500MSa/s; 32K memory depth; 7" display(818div); Support USBTMC protocaol and SCPI command |
N/A |
Discontinued Replaced by: SDS1202X-E |
|
SDS1102X |
100MHz Two Channels, Phosphor Oscilloscope |
N/A |
Discontinued Replaced by: SDS1202X-E , SDS1104X-E, SDS1204X-E |
|
SDS1102X HD
|
100MHz, 2 channels, 2GSa/s, 12-bit high resolution, 100Mpts memory depth mixed signal oscilloscope; 10.1 inch touch screen |
$999.00
|
Add to Cart Request Quote
|