| General |
| CAPACITY | 8 oz, 200 g, 2 N |
| RESOLUTION | 0.01 oz, 0.1 g, 0.001 N |
| ACCURACY | ±0.2% FS + 1/2 digit at 23°C |
| DISPLAY | 4-Digit LCD, 11.5 mm High with various indicators including Low Battery Indication and minus sign for Tension. |
| MEASURING MODE | Average, Peak Compression, Peak Tension (selectable) |
| DISPLAY UPDATE | 125 ms, 250 ms, 1 sec, 2 sec (selectable) |
| SAMPLING RATE | Average Mode: 125 ms, 250 ms, 1 sec, 2 sec Peak Mode: 1 ms, 125 ms, 250 ms, 1 sec, 2 sec |
| TEMPERATURE COEFFICIENT | Zero: ±0.02% FS/°C (max.), Span:±0.015% of reading/°C (max.) |
| OUTPUTS | 1. RS232C 2. Digimatic: (works with Mitutoyo's printer model DP-1HS) |
| 3. Analog | (±1VDC with load impedance of 2K or higher and tare function capability.) |
| OVERLOAD CAPACITY | 200% of FS |
| COMPARATOR OUTPUT (Set Points) | Three open collector NPN transistors for HI, GO, and LO (28VDC, 7 ma max.) |
| OVERLOAD OUTPUT | Two open collector NPN transistors one for Tension and one for Compression (28VDC, 5 ma max.) |
| TARE & HOLD CONTROL | Relay contact (selectable) |
| MEMORY | Holds 100 samples plus statistics (MAX, MIN, AVG, and Standard Deviation) |
| POWER | 4 - AA Alkaline batteries. Last approx. 20hrs. in continuous operation or AC Adapter for continuous use (6VDC, 200 ma) |
| AUTO POWER SHUT-OFF | Selectable (3 minutes if there is no activity) |
| OPERATING TEMP RANGE | 32 - 113°F (0 - 45°C) |
| DIMENSIONS/WEIGHT | 3"W x 1.77"H x 9.72"L (76 x 45 x 247)mm /1.2 lbs. (550 g) |
| ACCESSORIES (Included) | Batteries, carrying case, overload output cable, AC adapter, 6 adapters (flat head, hook, chisel, notched head, cone & extension rod) |
| ACCESSORIES (Available) | Test stands, RS232C cable, Digimatic, analog and comparator output cables. |