The SCS PCL100 Metal-In Static Shielding Bag is certified to IEST-STD-CC1246E Level 100 and is designed to provide a static safe environment for ESD sensitive electronic devices, and addresses concern for surface particulate in cleanroom applications. Bags are embossed with an ESD protective symbol and a lot code for traceability. Open top styles are available. The bags are heat sealable. Standard and custom size bags and rolls are available. SCS PCL100 Metal-In Static Shielding Bags are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded.

• ESD safe packaging designed for use in cleanroom areas where surface particulate is of concern - tested in accordance with IEST-STD-CC1246E
• Metal-In Film Laminate 0.0028in thick (0.071mm) - protects ESD sensitive components from electrostatic fields and electrostatic discharge
• <10 nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31 - Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD shielding packaging inside and outside an ESD Protected Area
• Dissipative Inner and Outer Surfaces Rs 1 x 10E4 to <1 x 10E11 ohms per ANSI/ESD STM11.11 and Static Control Bag ANSI/ESD S11.4 Level 3 - Allows bag to be used throughout an ESD Protected Area and grounded when placed on a grounded surface or handled by a grounded operator
• Printed with ESD Protective Symbol and Lot Code Information - Meets the requirements of ANSI/ESD S541 for quality control purposes
• Made in the United States of America -
• Lead-free RoHS 3, REACH and Conflict Minerals Compliant
• OpenTop (PCL100) and film rolls (PCL100R) are available