Spectrum Analyzer Package (5 kHz to 7.5 GHz, B4 OCXO, B5 Interfaces, B22 Pre-Amp, B25 Electronic Step Attenuator)
Note: This is a special package with the following options preinstalled: B4, B5, B22, B25. See the P1 Package section below for further details.
In an RF lab, the R&S FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.
The R&S FPL1000 is the only instrument in its class that features (optionally) an internal generator up to 7.5 GHz (R&S FPL1-B9 option) and can analyze signals with a bandwidth of 40 MHz (R&S FPL1-B40 option, for frequencies above 6 GHz the R&S FPL1-B11 option is required).
The solid RF performance makes the R&S FPL1000 the ideal instrument for labs, test houses, production, and service. The 1 dB attenuator step size (R&S FPL1-B25 option) allows measurements at the instrument’s maximum dynamic range. The preamplifier (R&S FPL1-B22 option) extends the sensitivity level. Thanks to its high sensitivity and low phase noise performance, even small interfering signals next to the carrier can be analyzed.
The R&S FPL1000 is as intuitive as a smartphone. Simple swiping gestures adjust the center frequency or the reference level. Two-finger gestures change the span or the displayed power level, while the 10.1" screen with 1280 × 800 pixel resolution provides a clear image of the signal. The user can freely arrange the layout of the measurement results on the display. In the MultiView display mode, different measurement modes can be combined and all the results displayed on one screen.
The R&S FPL1000 has a depth of only one hand length. It fits into any workplace and leaves enough space for DUTs and other measurement instruments.
Its light weight and battery operation let you take the instrument anywhere for measurements. The optional battery pack provides three hours of operation and the rich set of accessories make the R&S FPL1000 suitable for field measurements. A protective hard cover is available for transport and a padded carrying bag that allows the instrument to be operated in it. A shoulder harness simplifies portable operation.