Frequency Range |
9 kHz to 13.6 GHz |
Frequency |
Frequency resolution |
0.01 Hz |
Setting time[1] |
< 10 ms (typ.) |
Frequency Band |
Band |
Frequency range |
N[2] |
1 |
f < 227.5 MHz |
0.25 |
2 |
227.5 MHz |
0.125 |
3 |
455 MHz ≤ f < 910 MHz |
0.25 |
4 |
910 MHz ≤ f < 1820 MHz |
0.5 |
5 |
1820 MHz ≤ f ≤ 3600 MHz |
1 |
6 |
3600 MHz < f ≤ 6500 MHz |
2 |
7 |
6500 MHz < f ≤ 13600 MHz |
4 |
Internal Reference Frequency |
Reference frequency |
10 MHz |
Initial calibration accuracy |
≤ 0.1 ppm |
Temperature stability |
Temperature range: 0℃ to 50℃ , reference to 25℃ |
< 1 ppm |
Aging rate |
< 1 ppm/year |
Internal reference frequency output |
Frequency |
10 MHz |
Level |
+5 dBm to +10 dBm |
External reference frequency input |
Frequency |
10 MHz |
Level |
0 dBm to +10 dBm |
Maximum deviation |
±5 ppm |
Note:
[1] Time from receipt of SCPI command to within 0.1 ppm of final frequency (final frequency ≥ 227.5 MHz) or within 100 Hz (final frequency < 227.5 MHz).
[2] N is a factor used to help define certain specifications in this manual. |
Frequency Sweep |
Sweep type |
Step sweep (equally or logarithmically spaced frequency steps)
List sweep (list with arbitrary frequency steps) |
Sweep mode |
Single, continuous |
Sweep range |
Full frequency range |
Sweep shape |
Triangle, ramp |
Step change |
Linear or logarithmic |
Number of points |
Step sweep |
2 to 65535 |
List sweep |
1 to 6001 |
Dwell time |
20 ms to 100 s |
Trigger mode |
Auto, key, external, bus (USB and LAN) |
Spectral Purity[1] |
Harmonic |
CW mode |
2 MHz < f ≤ 6.5GHz, level ≤ +13 dBm |
< -30 dBc |
6.5 GHz < f ≤ 12 GHz, level ≤ +10 dBm |
< -30 dBc |
12 GHz < f ≤ 13.6 GHz, level ≤ 2 dBm |
< -30 dBc |
Spectral Purity[1] |
Sub-harmonic[2] |
CW mode |
3.6 GHz < f ≤ 13.6 GHz |
< -60 dBc, < -70 dBc(typ.) |
Non-harmonic |
CW mode, level > -10 dBm, carrier offset > 10 kHz |
100 kHz ≤ f ≤ 1.5 GHz |
< -60 dBc, < -70 dBc (typ.) |
1.5 GHz < f ≤ 3.6 GHz |
< -54 dBc, < -64 dBc (typ.) |
3.6 GHz < f ≤ 6.5 GHz |
< -48 dBc, < -58 dBc (typ.) |
6.5 GHz < f ≤ 13.6 GHz |
< -42 dBc, < -52 dBc (typ.) |
SSB phase noise |
CW mode, carrier offset = 20 kHz, 1 Hz measurement bandwidth |
f=1 GHz |
< -110 dBc/Hz, < -116 dBc/Hz (typ.) |
f=6.5 GHz |
< -98 dBc/Hz, < -102 dBc/Hz (typ.) |
f=13.6 GHz |
< -92 dBc/Hz, < -96 dBc/Hz (typ.) |
Residual FM |
CW mode, RMS value at f = 1 GHz |
0.3 kHz to 3 kHz |
< 10 Hz rms, < 5 Hz rms (typ.) |
0.03 kHz to 20 kHz |
< 50 Hz rms, < 10 Hz rms (typ.) |