• 4 analog channels / 250 MHz bandwidth

• 16 digital channels (requires optional PLA2216 logic probe)
• This model does not have a 25 MHz arbitrary function generator
• Small footprint: 10.5”W x 6.4”H x 3.1”D
• 7" (1024x600) capacitive multi-touch screen

The DHO900 series is RIGOL's latest high-performance, economical digital oscilloscope. Though compact in design, it offers superior performance with a capture rate up to 1,000,000 wfms/s (in UltraAcquire Mode), 50 Mpts memory depth, 12 bits resolution, and low noise.

Rigol offers four versions of its DHO900 series, with analog bandwidth of 125 or 250 MHz, and the option for a 25MHz single channel arbitrary function generator and bode plot analysis.

The DHO900 series supports 16 digital channels. One instrument can make an analysis on both analog and digital signals to meet embedded design and test scenarios. With an affordable price equivalent to purchasing an entry-level instrument, you can access auto serial and parallel bus analysis, bode plot analysis, and other functions to meet testing demands in the R&D, education, and scientific research fields.

Please note, use of the digital channels requires the optional PLA2216 logic probe.

The DHO914S and DHO924S include a single channel, 25MHz arbitrary function generator. It features a sample rate of 156MSa/s, 14-bit vertical resolution, and outputs the following standard waveforms: sine, square, ramp, DC, noise, and also supports user-defined waveforms.

This integrates the signal source and the oscilloscope into one, providing great convenience for engineers who need to use the signal source and oscilloscope at the same time.

Bode plot is a way of graphically displaying the frequency response of a system. In the switch power supply and operational amplifier's circuit feedback network, the Bode plot provides the curves displaying the variation of gain and phase with the frequency for a loop analysis. Through the analysis on the system's gain and phase margins, you can determine the stability of the system.

With the built-in signal generator module, the DHO914S and DHO924S generate the sweep signal of a specified frequency range and outputs to the switch power supply circuit under test. Then, the oscilloscope draws a Bode plot displaying the variation of phase and gain with different frequencies.

The DHO900 supports several methods of remote control:

• User-defined programming
• Program and control the instrument by using the SCPI (Standard Commands for Programmable Instruments) commands
• PC software
• Use PC software to send commands to control the instrument remotely. RIGOL Ultra Sigma is recommended. Software is available for download from the Rigol website
• Web control
• Connect the instrument to the network, input the IP address of the instrument into the address bar of the browser of your computer and the web control interface is displayed
• View the display of the real-time interface of the instrument

The instrument's large capacitive touch screen makes operation and configuration easy. Actions supported by the touch screen controls include tapping, pinching and stretching, as well as dragging.

• Tap
• Use one finger to tap the symbol or characters on the screen to perform a variety of functions including selection, navigation and more
• Drag
• Use one finger to select the object, and then drag the to a new location
• Pinch and stretch
• Pinch or stretch two points on the screen with two fingers to zoom in or out
• Pinching and stretching horizontally can adjust the horizontal time base of the waveform
• Pinching and stretching vertically can adjust the vertical scale of the waveform

1. Waveform view                                                8. Result sidebar

2. Run state                                                           9. Split screen display

3. Horizontal timebase                                      10. Notification area

4. Sample rate and memory depth                11. Math

5. Horizontal position                                        12. Function generator (DHO914S/DHO924S only)

6. Trigger                                                               13. Channels

7. Function toolbar                                             14. Function navigation icon

1. 7” touch screen                                             9. Trigger controls

2. Multipurpose knobs                                   10. Horizontal controls

3. Analyze key                                                   11. Vertical controls

4. Measure key                                                 12. Probe compensation signal output / ground terminal

5. Cursor key                                                     13. Analog channel inputs

6. Common tool keys                                      14. Digital channel input

7. Touch lock keys                                           15. USB host

8. Quick action key (self defined)               16. Power key

1. AUX out                                                                 6. USB-C power connector

2. AFG out (DHO914S/DHO924S only)                7. Security lock hole

3. LAN                                                                         8. Ground terminal

4. USB device                                                            9. Mounting screws (VESA 100x100)

5. HDMI