The Purex 105098 is a 7 way Lumberg connector with a 5m cable.

For alarm:

• Pins 3 and 4 = volt free alarm output contacts

For remote start:

• Voltage signal required from the process machine to operate
• Pin 1 = +9V DC / +24V DC remote start input signal
• Pin 2 = 0V DC input
• Pins 5, 6 and 7 = not used

Machine interfacing has two elements - Remote Start and Filter Relay Condition.

• Remote Start allows the Purex extractor to be controlled by the process machine, such as a laser or reflow oven.
• The Filter Relay Condition warns the operator if the Purex extractor starts alarming.