My Account

Log in to Your Account

Not a member yet? It's FREE!

Join

Why Join? Gain access to exclusive pricing, rewards and more!

Member Pricing & Rewards active

Protek P3502C 20MHz Oscilloscope

0 reviews | Model: P3502C

Compare

20 MHz 2Ch. Oscilloscope with Component Checker

20MHz Bandwidth
Alternate trigger for a stable display of unrelated signals
Alt-Mag sweep for simultaneous display of the normal and X10 magnified trace
Autofocus
Internal sync separator circuit for stable triggering of video signals
Large 6 inch CRT with internal graticule for parallax free waveform measurements
Z axis input and CH 1 output
Sweep speeds to 10ns/Div
10kV acceleration voltage

View Product Details

List Price: $399.00

In Stock:

View Payment Options

Recommended for you

Accessories

Choose a Category

for the P3502C

Cal Test CT4103 Universal Adapter Kit

Catalog: CT4103

(9)

In Stock!

Add to Cart

Rigol ADP0150BNC 50 Ohm impedance adapter for oscilloscopes or generators

Catalog: ADP0150BNC

(30)

In Stock!

Add to Cart

Cal Test CT4042 Oscilloscope Accessory Kit. Get the most out of your scope with this...

Catalog: CT4042

(24)

In Stock!

Add to Cart

Aim-TTi Iprober 520 Positional Current/Field Probe DC-5MHz 5mA-20A

Catalog: 58250-0010

(5)

In Stock!

Add to Cart

Auburn P-20A 3GHz RF Probe BNC. (adaptor for SMA not included )

Catalog: P-20A

(3)

In Stock!

Add to Cart

Description

Manuals/Guides

Manufacturer Specs

Vertical Amplifier (CH 1 and CH 2)
Sensitivity	5mV/Div to 5V/Div in 10 steps (1-2-5 seq) X5 Mag: 1mV/Div to 1V/Div
Accuracy	±3% (±5% in X5 Mag)
Bandwith(-3dB)	DC to 60MHz
Rise Time	< 5.8ns
Input Impedance	1MW + 25pF
Input Coupling	AC-Gnd-DC
Invert Channel	CH2
Display Modes	CH1, CH2, Add, Dual
Chop Frequency	250kHz ±3%
Maximum Input Voltage	400V (DC or AC peak)
CH1 Signal Output	20mV into 50W: (50Hz to 5MHz)
Horizontal Sweep
Sweep Time	0.1µs/Div to 0.2s/Div in 20 calibrated steps (1-2-5) X10 Mag: 10ns/Div to 20ms/Div
Accuracy	±3% (±5% in X10 Mag)
Display Mode	A, Alt-Mag, XY Dual
Sweep Magnifier	X10 ±5%
Trace Sep	1.5 Div Min
Horizontal Amplifier
Linearity	±3% (±5% in X10 Mag)
X-Y Mode	CH 1-X axis, CH 2-Y axis
Sensitivity	Same as CH 1 Vertical Amplifier
Bandwidth	DC: DC to 500kHz AC: 10Hz to 500kHz
Phase Error	£ 3° DC to 50kHz
Triggering
Source	CH 1, CH 2, Line, EXT
Coupling	AC
Modes	Auto, Norm, TV-V, TV-H
Slope	Positive or Negative
Trigger Sensitivity	Int: DC to 5MHz: 0.5 Div 5MHz to 40MHz: 1.5 Div; 40MHz to 60MHz: 2.5 Div Ext: DC to 5MHz: 200mV P-P 5MHz to 40MHz: 800mV P-P 40MHz to 60MHz: 1V P-P TV: Int: 1 Div Min; Ext: 1 V P-P Min TV-H (Television Line synchronizing Freq) TV-V (Television Frame synchronizing Freq) Automatically switched by the A Time/Div Front panel control
External Trigger Input	Impedance: 1MW + 20 pF Maximum Input Volts: 300V (DC or AC peak)
Z Axis Modulation
Sensitivity	±5V P-P Intensity increases with a negative going voltage input
Bandwidth (-3dB)	DC to 2MHz
Input Impedance	Approx. 33 KW
Maximum Input Voltage	30V (DC or AC peak)
Calibrator Signal
Frequency	Approx. 1kHz (±20%)
Voltage	0.5V P-P ±3%
Duty Cycle	Approx. 50%
CRT
Type	6" rectangular CRT with illuminated internal 8 X 10 Div graticule (1 Div = 1cm)
Acceleration Voltage	10 kV
General Specification
Power Requirements	AC Input Voltage: 100V, 120V, 220V, 240V ±10% selectable
Frequency	50/60Hz
Power Consumption	55W
Operating Temperature	0 to 40°C
DIMensions	5.3" H x 13.4" W x 14.8" D
Weight	24 lbs.
Supplied Accessories	Manual, AC Power cord, (2) X1/X10 Probes