| General Specifications |
| Model |
MRM-10-V2 |
MRM-10E-V2 |
MRM-100A |
MRM-200 |
| Test Current |
1 mA - 10 A |
up to 100 A (True DC) |
5 A - 200 A (True DC) |
| Resistance Ranges |
0-200 mΩ @ 10 A
0-1000 mΩ @ 5 A
0-200 mΩ @ 1
0-2000 mΩ @ 100 mA
0-20 Ω @ 10 mA
0-2000 Ω @ 1 mA |
0.1 μΩ to 300 mΩ |
0.1 μΩ to 2 mΩ, with 0.1 μΩ resolution
2 mΩ to 200 mΩ, with 10 μΩ resolution
0-200 mΩ to 1 Ω, with 1 mΩ resolution |
| Resolution |
1 μΩ @ 10 A |
0.1 μΩ @ 10A |
up to 0.1 μΩ |
up to 0.1 μΩ |
| Input |
100-240 V, 50/60 Hz |
| Basic Accuracy |
±( 0.2% of reading ± 2 digits) |
±(0.10% of reading + 3 LSD) |
±(1% of reading ±1 digit) |
±1% of measured value |
| Protection |
n/a |
Overcurrent, short-circuit and thermal |
| Operating Temperature |
23°F to 122° F (-5°C to 50°C) |
| Storage Temperature |
-13°F to 158° F (-25°C to 70°C) |
14°F to 140° F (-10°C to 60°C) |
| Humidity |
<95%, non-condensing |
| Advance Features |
- Remote control via Android device
- Built-in memory for up to 30,000 measured values
- When measuring inductive loads, the bar graph display makes it easy to verify that the current has stabilized
- Built-in rechargeable battery
- Built-in printer
- Temperature compensation (MRM-10E-V2 only)
|
- Programmable set-up test time 5-120 seconds
- Built-in memory with capacity to store 50 registers with 80 readings each
- Built-in Printer (MRM-100A only)
|
| Dimension LxWxH |
15” (378 mm)
12” (308 mm)
7” (175 mm) |
15” (378 mm)
12” (308 mm)
7” (175 mm) |
20” (502 mm)
15.5“ (394 mm)
7.5” (190 mm) |
20” (502 mm)
15.5“ (394 mm)
7.5” (190 mm) |
| Weight |
14 lbs (6.5 kgs) |
14 lbs (6.5 kgs) |
45 lbs (20.5 kgs) |
45 lbs (20.5 kgs) |
| Accessories Included |
- Temperature Sensor (model MRM-10E-V2 only)
- Test Leads, 6’ (1.8 m), set of 2 (combined current and potential), with Alligator Clip, and U terminal (optional connectors and lengths available)
- Ground Test Lead, 10’ (3 m), with Alligator Clip and U terminal
- Power Cord
- Auxiliary Power Cable, 6’ (1.8 m)
- Auxiliary Power and Test Cable, 16’ (5 m)
- USB Cable, 6’ (1.8 m)
- Software license
- User guide
- Synthetic Bag for instrument and cables
|
- Test Leads, 19’ (6 m), set of 2 (combined current and potential), with C-clamp, and U terminal (optional lengths available)
- Ground Test Lead, 10’ (3 m), with Alligator Clip and U terminal
- Power Cord
- USB Cable, 6’ (1.8 m)
- Software license
- User guide
- Carrying Case for cables
|