| Model: PH-100 Specifications |
| Power Requirements |
120 VAC, 50-60Hz |
| Maximum Power Output |
1600 Watts |
| Weight |
8 kg (17.6 lbs.) |
| Dimensions |
355mm (14") D x 430mm (17") W x 60mm (2.4") H without Board Holders |
| Board Size Capacity |
Handles large 295mm (11.625") x unlimited PCBs |
| Working Height |
Low profile design with working height of 76mm (3.0") with Board Holders (height above bench, no feet)
Lowest Height: about 9mm (.35") above glass-ceramic surface
Medium Height: about 22mm (.87") above glass-ceramic surface
Highest Height: about 37mm (1.46") above glass-ceramic surface |
| Heating Elements |
4 x 400 Watt, Medium Wave IR Emitters (250mm x 60mm / 9.8" x 2.4" ea.) |
| Heating Area Dimensions |
300mm (11.81") W x 300mm (11.81") D |
| Temperature Control Method |
Closed loop temperature control by either internal sensor or one of two external thermocouples (one for the PCB top and the other for the PCB bottom) |
| Closed Loop Temperature Control |
Closed loop control at PCB level to control temperature when thermocouple is selected as the control option. |
| Temperature Control Modes |
Three Control Mode Options: Internal Sensor Mode; External Topside PCB Thermocouple Mode; External Bottom-side PCB Thermocouple Mode |
| Thermocouple Inputs |
Two (2) K-Type Thermocouple Inputs: Top-side and Bottom-side PCB Input |
| Set Temperature Range |
20°C – 200°C (68°F – 392°F) |
| Touch Screen Display |
User friendly 3.5" Resistive Touch Screen |
| Front and Back Heating Zones |
Two (2) separate and switchable heating zones |
| High Capacity Heating |
1600 Watt or 800 Watt, user selectable |
| Power Meter |
Indicates heater activity (duty cycle) |
| Performance Response Settings |
Normal: Heats up quickly; Fine: Heats up slowly with fine control |
| Temperature Offsets |
User selected temperature offsets for each heating zone |
| Advanced and User Modes |
Advanced Mode: All operational settings available; User Mode: Restricts user access to advanced settings |
| Programmable Pre-Heating |
Select Time-at-Temperature preheat phase with audible alarm |
| Sound Settings |
None: Disables sound; Short: Short beep will sound; Long: Longer beep will sound |
| Lock Screen/Password |
Easy setting of password to prevent unauthorized or inadvertent changes |
| USB Port |
Programming/firmware is upgradeable using USB Flash Drive |
| Magnetic PCB Holder |
Easy to adjust board holder with magnetic feet provides 4 different height options (None, Short Standoffs, Long Standoffs, Angled with Short/Long Standoffs) |
| Safety Agency Approval |
CE compliance/certified by TUV |