• Measures liquid flow velocity in pipes and tubes with diameters of 57 – 720 mm
• TDS-M1 sensors included
• Temperature data logger PCE-T 330 and temperature pipe contact sensor included.
• Internal memory saves up to 60,000 measured values
• Non-invasive, unobstructed, and highly accurate measurements 

The PCE-TDS 100H+ is an ultrasonic flow meter that measures liquid flow velocity in pipes and tubes with a diameter of 57 to 720 mm, or approximately 2 to 28 inches. This version comes with a two-channel temperature data logger. The portable, handheld, clamp-on sensor flow meter provides non-invasive, unobstructed, and highly accurate measurements of the flow velocity of liquids in metal, plastic, and rubber pipes. The user-friendly Velcro-strap clamps allow for quick and easy repositioning of the electroacoustic transducers.

The PCE-T 330 two-channel temperature data logger can be connected to a thermocouple type K, T or J. It has a measuring rate of 2Hz and high accuracy and resolution of 0.01°C. The temperature data logger can save and store up to 20,000 measuring points. When the thermometer is connected to a computer, it is recognized as a removable disk. No additional software is required for further analysis. 

The PCE-TDS 100H+ ultrasonic flow meter is ideal for use in oil and gas, water and wastewater, chemical, food and beverage, pharmaceutical, metals and mining, pulp and paper, power and heating, ventilation, air conditioning, and refrigeration (HVAC) industries. Measurable liquids include:

Up to 60,000 measurements can be saved and stored on the PCE-TDS 100H+. Via the USB interface, the meter can be connected to a computer for data transfer. Please note in order to transfer data from the flow meter to a computer, the software is required. Evaluation software is included with the PCE-TDS 100H+ for the evaluation of heat quantity and heat output. The PCE-T 330 two-channel temperature data logger stores up to 20,000 measuring points and does not require additional software to connect with a computer.