GENERAL |
Dimensions (with module and battery installed) |
10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm) |
Weight (with module and battery installed) |
3.5 lb (1.6 kg) |
Display |
5.7 in (14.5 cm) LCD with projected capacitance touch screen, 480 x 640 pixels |
AC adapter |
Input: 100-240 VAC, 50-60 Hz, 1.0 A
Output: +15 VDC, 2.0 A |
Battery type |
Lithium ion battery pack, 7.2 V |
Battery life |
Approximately 3-4 hours depending on type of usage, 4 hours to charge from 10% capacity to 90% capacity with the unit powered off |
Memory |
Internal: 2 GB shared between system and user files
SD card: 8 GB, brand and model selected for optimal performance
USB 2.0 type A port: for use with USB mass storage devices |
Management port |
One RJ-45 10/100BASE-T Ethernet
One USB 802.11 (requires optional adapter) |
G2 MODULE NETWORK INTERFACES |
Network analysis ports |
Two RJ-45 10/100/1000BASE-T Ethernet
Two SFP 100BASE-FX/1000BASE-X Ethernet |
Wi-Fi adapter data rate |
802.11a: 6/9/12/24/36/48/54 Mbps
802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/24/36/48/54 Mbps
802.11n (20 MHz): MCS0-23, up to 216 Mbps
802.11n (40 MHz): MCS0-23, up to 450 Mbps
802.11ac (80 MHz): MCS0NSS1-MCS9NSS3, up to 1.3 Gbps |
Wi-Fi adapter operating frequency |
2.412 ~ 2.484 GHz (Industrial Scientific Medical Band)
5.170 ~ 5.825 GHz |
Wi-Fi security |
64/128-Bit WEP Key, WPA/WPA2 personal, WPA/WPA2 enterprise, 802.1X |
10G MODULE NETWORK INTERFACES |
Network analysis ports |
100/1000/10 G BASE-T RJ-45 Ethernet over twisted pair
1000 BASE-X SFP/10 G BASE-SR/LR SFP+ Ethernet over optical fiber |
Management port |
One RJ-45 10/100 BASE-T Ethernet
One USB 802.11 (requires optional adapter) |
Supported network standards |
IEEE 100BASE-T
IEEE 1000BASE-T
IEEE 10GBASE-T
IEEE 1000BASE-X
IEEE 10GBASE-SR
IEEE 10GBASE-LR |
RFCs and standard MIBs used |
1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757
1759, 2021, 2108, 2115, 2127, 2233, 2495, 2515, 2558
2618, 2737, 2790, 2819, 3592, 3895, 3896, 4188, 4502 |
Note: The OneTouch AT analyzer is NOT designed for connection to a telephone network, ISDN line. Do not connect to a telephone network or ISDN line except through a regulatory agency compliant computer network modem device. |
COPPER CABLES TEST |
Cable types |
100 Ω Unshielded Twisted Pair (UTP) LAN cables
100 Ω Shielded or Screened Twisted Pair (STP) LAN cables
TIA Category 3, 4, 5, 5e, and 6. ISO Class C, D, E and F |
Cable length measurement |
Measurable cable lengths are from 3 feet (1 meter) to 656 feet (200 meters)
Accuracy: ± 30 feet (±10 meters)
Length measurement is based on Nominal Velocity of Propagation (NVP) for CAT 5e cable |
ENVIRONMENTAL AND REGULATORY |
Operating temperature |
32°F to 122°F (0°C to 50°C) |
Battery charging temperature |
32°F to 104°F (0°C to 40°C) |
Storage temperature |
-40°F to 160°F (-40°C to 71°C)
-4°F to 122°F (-20°C to 50°C) for periods longer than 1 week |
Operating relative humidity (% RH without condensation) |
5% to 45% at 32°F to 122°F (0°C to 50°C)
5% to 75% at 32°F to 104°F (0°C to 40°C)
5% to 95% at 32°F to 86°F (0°C to 30°C) |
Shock and vibration |
Meets the requirements of MIL-PRF-28800F for Class 3 Equipment |
Safety |
CAN/CSA-C22.2 No. 61010-1-04, IEC 61010-1:2001 |
Operating altitude |
13,123 ft (4,000 m), 10,500 ft (3,200 m) with AC adapter |
Storage altitude |
39,370 ft (12,000 m) |
Pollution degree |
2 |
EMC |
EN 61326-1:2006 |
CERTIFICATIONS AND COMPLIANCE |
Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA)
Listed by the Canadian Standards Association
Conforms to relevant Australian standards
Conforms to relevant South Korean EMC Standards |