NK AGT2-005-24U-FD - Ground Fault Indicator, AGT-FD Series

• Model = 0-100 mA
• Output type = 0-5 VDC proportional to AC current
• Power supply = 24 VAC or DC
• Case = solid-core, DIN rail or panel mounting
• Analog output signal

AGT-FD Series ground fault sensors detect faults to earth from 0 mA to 100 mA and produce an output signal of 0-10 VDC in proportion to the amount of current passing to ground. The output is equal to the RMS value of the earth leakage. The AGT-FD can also be used to measure and monitor any low value AC circuit current by passing just one of the conductors through the sensing window.

Display Shows Amount of Fault Current Present

Ground Fault Sensor Applications

Current Leakage

• Monitor residual (earth leakage) current by passing all the current carrying conductors through the sensing aperture.

Very Light Loads

• Monitor circuits of varying frequencies or distorted wave shapes, but very low current usage.

Ground Fault Sensor Features

Analog Output Signal

• 0-5 or 0-10 VDC proportional to 0-100 mA.
• Sensing window large enough to monitor 100 amp circuits.

Externally Powered

• Low power consumption (< 2 VA).
• 24 Volt AC or DC (20-30 V).

Factory Calibrated

• Warranted to stay accurate for five years minimum.
• Compatible with most PLCs, panel meters and other controllers.

Large Solid-core Case

• Large sensing window provides ample space for multiple conductors.

DIN Rail* or Panel Mount

• Simple snap onto DIN rail.

UL, cUL and CE Approved

• Accepted worldwide.

Ground Fault Sensor Connections

Ordering Information

Sample Model Number: AGT2-010-24U-FD

Ground fault sensor, output 0-10 VDC proportional to AC current, 24 VAC/DC powered, DIN rail or panel mounted.