• Detect and eliminate costly screw-fastening errors
• Detects cross-threading, omissions, unfinished rundown, and cycle-complete
• Detection of fastening error and buzzer alert. Displays error condition
• The fastener accepts and rejects lights (Go/No Go)
• Visual assembly fastener count (count up or down), including the total count

The Mountz Scout screw counter helps manufacturers detect and eliminate costly screw-fastening errors during the assembly process. Using a screw counter is like putting the eyes and ears of a quality control manager where they are needed most - right in the assembly area. The scout is designed to detect cross-threading, omissions, unfinished rundowns, and cycle completion. The screw counter takes the control of the assembly process out of the operator's hands.

Additional Features:

• The Scout is designed to interface with these transformers: STC30 Plus, STC40, HTC35, ET-30D, FT-30D, YFC-35D
• Programming via PC software or through Scout unit
• Outputs for machine & PLC interface for line control
• Input Features: Cycle Start and Driver Lock - prevents driver activation until PLC input signal
• Output Features: Cycle End, OK, NG and Buzzer Alarm
  
  

Note: The Scout can be powered by an ET-30D, FT-30D, STC30 Plus, STC40, HTC-35, and YFC-35D or via external power, SMPS adapter 24VDC, 1A. It only operates with these transformers and can be used with most Mountz electric screwdrivers.

Software: If your Scout II firmware is not v1.40, contact us for the software or any technical support needs.