The Mitutoyo Absolute Digimatic SD-G scale provides accurate linear measurements with digital data output capabilities. The SD-G Digimatic scale facilitates mounting on jigs, tools and small machine tools to enable accurate positioning. A built-in Absolute scale is also included, using the Mitutoyo ABS point, which doesn’t require zero-set when powered on. In addition, overspeed errors have been eliminated which improves reliability.

• SD Series facilitates mounting on jigs, tools, and small machine tools to enable accurate positioning
• Resolution: 0.01mm (0.0005in)
• ORIGIN key allows setting of an absolute zero point to be used as reference in subsequent measurements
• Horizontal display according to the scale mounting direction
• Long battery life for easier maintenance
• Equipped with an output port to transfer measurement data to implement in control and gaging systems
• IP66 certified for protection against dust and water
• EC counters are available as external display units

• ABS (Absolute) measurement function
• INC (Incremental) measurement function
• Zero-setting function
• Presetting function (2 preset values can be set. Not
• available for SD-G, SD-AX, SD-D, SDV-D)
• Double reading function (Available only for SD-F or SDV-F)
• Direction switch function (Available only for SD-E, SDV-E)
• Hold function (To activate the hold function when using SD-AX, SD-D or SDV-D models, an optional hold unit is required. Simultaneous activation with the output function is not available)
• Measurement value composition error alarm
• Low battery alarm
• Output function

Note: These units use 1.5 V silver oxide cells for the power supply. Therefore, when the units are directly fixed to the frame of a machine tool that requires a high voltage, malfunctions such as display digit fluctuations and errors may occur. Countermeasure examples are described in the user manuals provided.