The Mitutoyo Inch Square Long Gage Block Sets are available in different grades, sizes and steps, offering exceptional precision and stable longitudinal and lateral orientation for calibrations and measurements in extended lengths. The Mitutoyo innovative lapping technique makes our gage blocks some of the most accurate and trusted instruments in the world, featuring exceptional flatness and ideal surface roughness. Mitutoyo steel gage blocks are constructed of high-carbon and methodically heat treated repeatedly for a high degree of hardness to reduce deterioration over time.

Mitutoyo Inch Square Long Gage Block Set

• Available with steel blocks only
• Available Grades include: 0 and AS-1
• Available Steps include: 1in, 2in and 4in
• Advanced lapping techniques achieve the best flatness, surface roughness needed for gage blocks
• Black characters on gage blocks are inscribed by laser and clearly visible
• Inspection Certificate included
• Supplied in a solid wooden case

Features and Benefits of Mitutoyo Square Gage Blocks

1. Perfect wringing is possible using center hole - After wringing the square gage blocks, an optional tie rod can be inserted through the center hole to fix the blocks using a screw

2. Height reference standard can easily be made - A precision height reference standard can be made easily and inexpensively using accessories such as the plain jaw and block base

3. A dedicated inspection jig can be made easily - A dedicated inspection jig for periodic inspection of instruments can be made easily and inexpensively

4. A wide measuring surface with cross section dimensions of (24.1 x 24.1mm / .95 x .95in) is available - A square gage block can retain stable orientation both longitudinally and laterally. A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller, and inspection of depth micrometers

Accuracy - Mitutoyo has established a traceability system for measurement products, up to the Metrology Management Center of the National Institute of Advanced Industrial Science and Technology (AIST) and have been certified by the Japanese government as an accredited laboratory.

Steel Blocks - The Mitutoyo steel gage blocks are constructed of high-carbon, high-chrome steel. High-carbon, high-chrome steel is employed to sufficiently satisfy a variety of material characteristics required for gage blocks. A high degree of hardness, obtained by Mitutoyo heat treatment technology, as well as methodically repeated heat treatment, have successfully reduced deterioration change over time.

8-piece Inch Square Long Gage Block Sets include the following blocks in Steel and Grades 0 or AS-1:

• 3 pcs. (5 - 7in; Step of 1in)
• 3 pcs. (8 - 12in; Step of 2in)
• 2 pcs. (16 - 20in; Step of 4in)