The Mitutoyo ABS ID-C Signal Output digital indicator has a maximum/minimum value holding function to perform Go/No-Go judgements against the peak values set. The judgement is performed by calculating the measurement data obtained instead of through a mechanical or electrical contact which provides better reliability. The judgement is indicated by green and red LEDs and “<, O, >” signs on the LCD allowing the signal to be outputted to an external device such as a sequencer through the NPN open-collector.

Mitutoyo ID-C Digimatic Indicators - Signal Output Type

• Enables GO/NG judgment to be output to external equipment for a measurement result against the peak values set. Solid-state switching provides high reliability by avoiding metallic switch contacts
• The signal can be output to an external device such as a sequencer. The GO/NG judgment result is also indicated by the green/red LED and the signs on LCD
• External power supply required is 5-24V DC/ 100mA (max.)
• Provided with 4m cable
• Dust and water protection: IP54
• Five buttons, status icons, and clear button indications allow for easy operation of a wide variety of functions
• Wide LCD and new analog bar graph are standard on all models
• The ABS (absolute) scale restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors
• If using a spindle lifting cable (such as 21JZA295), it must now be attached to the top of the spindle due to the tapped hole being removed
• The spindle stop screw (under the dust cap) is metric - M2.5x0.45, so if using lifting levers (forked style), then a new spool-shaped stop screw is needed (101171); Or a complete, new lifting lever assembly could be purchased (21EZA198)

See Data Sheet for additional details.