The Mitutoyo small hole bore gages feature interchangeable anvils to take highly accurate diameter measurements of bore holes. Models are available with or without a Mitutoyo Dial Indicator. The Mitutoyo direct measuring bore gage for small holes is available in two different ranges (metric and inch) to measure inside bore diameters with an accuracy to +/- 0.005mm. The bore gage comes with nine interchangeable anvils to measure several different bore diameters with the same gage. A two-point contact system detects geometry anomalies such as oval-ness and taper.

• Available in Metric and Inch models
• Available with or without a Mitutoyo Dial Indicator
• Metric model ranges 6-10mm and 10-18.5mm
• Inch model ranges 0.24-0.4in and 0.4-0.74in
• Large, newly designed grips easy to hold and reduce heat transfer from the operator
• Models with dial indicators are fully protected by a rugged cover
• Gage stem diameter is 8mm / 0.375in
• Interchangeable anvils constructed of alloy steel, carbide-tipped measuring faces for accuracy and durability
• Includes 9 anvils

The Mitutoyo inch reading dial indicator performs with excellent accuracy and reliability, and it is available in several graduations and ranges for use in the widest range of applications. The stem and spindle are constructed of hardened, high-strength steel, and the jeweled bearing provides wear resistance and low friction movements for smooth, precise operations. Secured adhesion between the frame and crystal, along with the use of an O-ring, protects the indicator against water and oil permeation via the front face. The crystal has a scratch and glare-resistant coating for clearer readings and better durability. The outer clamp and optional lifting lever can be attached to either side and can be easily installed or removed without the use of tools.