Extension Rod w/ Thumbwheel, 130mm, 2.5 kN, 5-16 UNC
Extension rods are used to add length to a fixture often to prevent the specimen from making contact with the gauge/loadcell e.g. when compressing a plunger into a cylinder. They are also used to connect a force gauge or load cell to a grip or fixture e.g. a wedge grip or test hook. The thumbwheel or locking nut is used to secure the grip in the correct orientation - care should be taken not to overtighten when using with low capacity gauges and loadcells.
130mm long Extension Rod 5-16 UNC female to 5-16 UNC male. Fitted with knurled thumbwheel for locking accessory in the correct orientation.
Extension Rods Comparison Table
| Model | Load Capacity | Securing | Thread 1 | Thread 2 | Length |
| 432-006 | 500 N | Thumbwheel | 10-32 UNF F | 10-32 UNF M | 30 mm |
| 432-116 | 500 N | Nut | 10-32 UNF F | 10-32 UNF M | 30 mm |
| 432-007 | 500 N | Thumbwheel | 10-32 UNF F | M6 M | 30 mm |
| 432-186 | 500 N | Thumbwheel | M6 F | M6 M | 25 mm |
| 432-008 | 2.5 kN | Thumbwheel | 5/16 UNC F | 5/16 UNC M | 30 mm |
| 432-117 | 500 N | Nut | 10-32 UNF F | 10-32 UNF M | 130 mm |
| 432-187 | 500 N | Thumbwheel | M6 F | M6 M | 130 mm |
| 432-123 | 2.5 kN | Thumbwheel | 5/16 UNC F | 5/16 UNC M | 130 mm |