Luxor DIVCL-2424C - 24" x 24" Clear Acrylic Desk Divider with Clamps (Side Panel, 24" Height)

As employees return to the workplace and students return to their schools, we must rethink our environments to help maintain separation and safe distancing.

Easy to clean and constructed of high-quality materials, Luxor’s acrylic separation panels deliver a cost-effective alternative to pricey, bulky, and difficult to install full-height cubicles.

Clamp-on model offers simple assembly and effortless, tool-free attachment to the edges of desktops and tabletops from 1/4" to 1-3/4" thick. Rising a full 24" or 30" above the desktop surface, they are tall enough to help protect from sneezes and coughs.

Two side panels and a back panel

To make a complete three sided barrier, you need two side panels and one back panel. Please note, these are sold separately. However, all of the information you need is below:

• There are two heights
  • 24"
  • 30"
• There are four widths
  • 24"
  • 30"
  • 48"
  • 60"

For example, the item below contains two DIVCL2424 side panels - they are 24" tall, and 24" inches deep. They would be paired with a 24" tall back panel, either 48" or 60" wide. The part numbers for the back panels would be DIVCL-4824C and DIVCL-6024C, respectively.

It is important to make sure the height of the side and back panels are the same.

The clamps are included, you would only need to order the panels.

Cleaning the surface

These are easy to clean with a microfiber cloth and a solution of mild dish soap and water or commercial plastic cleaners rated safe for use on acrylics.

It is important to note, acrylic sheeting can be damaged by harsh solvents and cleaners. Only use cleaning products labeled “commercial plastic cleaners", or mild soap and water to remove dirt and debris. When applying the cleaner, use a non-abrasive lint-free or microfiber cloth that won't scratch the surface. Never use products containing ammonia, acetone, carbon tetrachloride, scouring compounds, alcohol, bleach, aromatics, or gasoline. Chemical glass cleaners (even if they are environmentally friendly, organic, or non-scented) are also not to be used. All solvents need to be wiped clean with fresh water and blotted dry to reduce and prevent water spotting. Failure to adhere to the above guidelines can cause yellowing, cracks, and scratches in acrylic sheeting and may give the surface a frosted appearance.