Excellent Performance
- 100 MHz Bandwidths
- 1 GS/s Sampling rate per channel
- 12 kpts/Ch memory, (24 kpts interleaved)
Great Connectivity
- USB host port for mass storage
- USB device port for printing and PC control
WaveAce 1000 and 2000 Oscilloscopes
A good oscilloscope should simplify how you work and shorten the time it takes to find and debug problems. The WaveAce™ combines long memory, a color display, extensive measurement capabilities, advanced triggering and excellent connectivity to improve troubleshooting and shorten debug time. With bandwidths from 40 MHz to 300 MHz, sample rates up to 2 GS/s and waveform memory up to 1 Mpts/Ch (2 Mpts interleaved) the WaveAce exceeds all expectations of a small affordable oscilloscope.
Smart Capabilities
- Averaging, Peak Detect and Equivalent Time
- Advanced Triggering
- Digital Filtering
- Built-in Help
- Multi-Language User Interface
Measure and Debug Tools
With 32 automatic measurements standard, the WaveAce simplifies how measurements are made. The large 7” widescreen display can show up to five measurements without crowd- ing the waveform display or show all 32 at once with the measurement dashboard. A wide range of advanced timing parameters provide insight to the relationship between signals on two different channels. WaveAce oscil- loscopes provide five math functions for additional analysis including Add, Subtract, Multiply, Divide and FFT. The FFT can be viewed using four differ- ent windows and two different vertical scales for an insightful view of the fre- quency domain. Built-in Pass/Fail Mask testing allows for quick identification of problems and highlights when they have occurred.
Easy to Use for Faster Debug
The high performance and large feature set of the WaveAce is controlled by an intuitive user interface with 11 differ- ent languages and a streamlined front panel. All important controls and menus are accessed from the front panel with a single button press. All position and offsets can be reset by simply pressing the knob, pressing the V/Div knob will switch between fixed and variable gain and pressing the T/div knob will toggle between zoom modes. Buttons on the front panel that open and close menus or switch modes, are backlit so that the mode of operation is easily visible to the user.
The Tools And Features For All Your Debug Needs
Long Capture and Zoom
Small, portable oscilloscopes often suffer from short capture time due to the small waveform memory. The WaveAce has up to 1 Mpts/ch of memory which is two to three times larger than competitive products. More memory results in longer capture times showing more waveform detail with each trigger. Activate the built-in zoom function to take a closer look at the details.
Automatic Measurements
Measure with 32 different parameters including advanced timing measurements and a dashboard view |
Waveform Math
Basic math plus FFT for advanced waveform analysis |
Pass/Fail Test
Quick mask testing with on screen result counter |
Digital Filter
Digital filtering is available on each channel of the WaveAce. The Low- Pass, High-Pass, Band-Pass and Band-Stop filters allow you to isolate only the frequencies you want to see.
|
Waveform Sequence recorder
Capture and replay a sequence of up to 2,500 waveforms to isolate that runt or glitch which is causing problems in your system.
|
Advanced Triggering
Edge triggering is not always the best choice for every signal.
Beyond the basic edge trigger is a set of trigger capabilities which include Pulse Width, Video and Slope (Rise Time) triggers. |
Connectivity
The WaveAce provides a USB host port on the front panel for saving screen images, waveforms and setups to a memory stick. A rear panel USB device port allows for connection to a PC or printer. Connecting and communicating with a PC is simplified with WaveStudio software providing full access to the oscilloscope’s display, measurements, and waveform data.
Large Internal Storage
Saving and recalling waveforms and setups from internal memory can save a lot of time during test and debug. The WaveAce can save up to 20 waveforms, 20 setups and two reference waveforms to the internal memory.
Acquisition Modes
Different applications call for different acquisition modes. The WaveAce offers Real Time, Equivalent Time, Peak Detect and Averaging modes to ensure that any waveform can be captured and displayed.
Smart, Simple , Efficient
WaveStation Integration
With 5 basic signal types, and over 40 built-in arbitrary waveforms Teledyne LeCroy's WaveStation is a versatile waveform generator. A variety of modulation schemes, intuitive waveform editing software and remote control capabilities, enable versatile waveform generation of waveforms up to 50 MHz. The 3.5" display and simple user interface make it easy to generate a wide range of waveforms. Additionally, con- necting a WaveAce oscilloscope to the same PC enables transferring real world signals from the WaveAce to the WaveStation.
LogicStudio 16 Integration
The WaveAce can be paired with Teledyne LeCroy’s LogicStudio 16 to turn your PC into a mixed signal oscilloscope with tools for capturing, viewing and measuring analog, digital and serial signals in one place. LogicStudio offers 16 channels, 100 MHz and up to 1 GS/s logic analysis with I2C, SPI and UART triggering and decoding which can all be displayed alongside the analog waveforms captured on WaveAce. When only digital debug is needed disconnect the WaveAce and use LogicStudio as a standalone logic analyzer.