LeCroy HVFO100-1X-TIP-U - HVFO10X +/-1V (1x Attenuation) Universal Tip Accessory

Attenuating tips are sold separately from the probe itself, but at least one tip is required for proper functioning. Tips can be stored in a compartment in the soft carrying case.

The attenuating tip makes a three-wire connection to the DUT, while the other end of the tip connects to the USB Micro-B input on the transmitter. Each tip communicates identifying information to the transmitter. The fixed attenuation determines the maximum voltage level that can be measured. All tips are interchangeable with any HVFO transmitter and do not require specialized calibration with a specific HVFO probe. The E-Z Micro-Grippers may be used with any of the tips.

Note: Tip selection is important to optimize for best noise performance. Using a tip with a wider dynamic voltage range than necessary will result in more noise.