Definition |
Protocol Setup |
Selection for source channels. Support is provided for SpaceWire using Data and BitRate or Data and Strobe. |
Decode Capability |
Format |
Bits Mode: Raw Zeroes and Ones (one line per bit)
N/L-Character Mode: ASCII, Hexadecimal, or Decimal (one line per N/L-Character).
Packet Mode: ASCII, Hexadecimal, or Decimal (one line per Packet)
Parity bits and data control flags are decoded in binary format while in N/L-Character and Packet Modes. |
Decode Setup |
Selection for source channels.
Basic Tab: Table Mode selection in Bits, N/L Characters, or Packets; Physical Layer selection of Data and BitRate or Data and Strobe
Selectable annotation of long NULL sequences.
Sync Tab: Automatically Synchronizes Decode on N consecutive NULLs (N is selectable), a user defined pattern, or manually
synchronizes on individual bits. (This is not a trigger but a synchronization between Bit Level and Character level)
Levels Tab: Select both Level and Hysteresis either in percent of amplitude or absolute (V) separately for Data and Strobe lines. |
Decode Inpu |
Any Analog Channel, Memory, or Math Trace |
# of Decode
Waveforms |
Up to 4 buses may be decoded at one time. In addition, zooms can be displayed (with decoded information). |
Location |
Overlaid on SpaceWire Data physical layer waveform. (Note: Use multi-grid if more than one decoder is turned on). |
Visual Aid |
Color Coding for SpaceWire Control Characters (L-Chars: ESC, EOP, EEP, FCT), Data Characters (N-Chars), Parity Bits, Control Flag,
Synchronization sequence, and Time-Codes. |
Search Capability |
Pattern Search |
“Bits” Mode: Search for Idx, Time, Data, and Status.
“N/L-Chars” Mode: Search for Idx, Time, Msg, Time-Code, Control Flag, Data, and Status.
“Packets” Mode: Search for Idx, Time, Msg, Time-Code, Control Flag, Data, and Status. |
Other |
Compatible
With... |
Fully compatible with WaveSurfer 10/MXs-B/MSO MXs-B Series, HDO4000 Series, HDO6000 Series, WaveRunner 6 Zi Series,
HDO8000 Series, MDA800 Series, WavePro 7 Zi Series, WaveMaster 8 Zi Series, LabMaster 9 Zi-A Series, and
LabMaster 10 Zi Series. |