Serial Related Technical Specifications |
Data Interfaces |
RS-232 ComProbe II' for Async RS-232 communications; 'RS-422/485 ComProbe' for Async RS-422/485 communications; 'RS-232 ComProbe' for synchronous RS-232/422/485 communications; V.35/36/10/11, and X.21 interfaces supported through optional serial cards or converters. |
Data Rates |
Up to 921.6K bps Async, including support for user-defined non-standard data rates using the RS-232 ComProbe II and RS-422/485 ComProbe.Up to 64K Sync and 38.4 Async with RS-232 ComProbe Option. |
Operating Modes |
Monitor DTE, Monitor DCE, & Monitor Both available for RS-232 ComProbe II and RS-422/485 ComProbe; Transmit mode and Spy Mode available only for built-in PC serial ports. |
Communication Modes |
Asynchronous (RS-232 ComProbe II and RS-422/485 ComProbe), Synchronous (RS-232 ComProbe), Isochronous (RS-232 ComProbe). |
Bit Order |
LSB (normal) or MSB (reversed) first. |
Flow Control |
Software (including user-defined Xon/Xoff), Hardware (RTS/CTS and DTR/DSR). |
Character Sets |
ASCII, 7-bit ASCII, EBCDIC, Baudot. |
Data Formats Decoded |
16 bit Integers, 32 bit Integers, 32 bit Floating Point, 32 bit Reverse Floating Point, and ASCII. |
Parity |
None, Even, Odd, Mark, Space. |
Word Length |
5, 6, 7, or 8 bits. |
Stop Bits |
1, 1.5, or 2 bits. |
Timestamping |
Absolute and relative timestamping; <1 microsecond resolution. |
Other Features |
Write custom decodes using DecoderScript language; Get all future software updates for free. |
Serial Protocols Supported |
Modbus RTU, Modbus ASCII, DNP3, DF1/PCCC, BSAP, and PPP, SLIP, and PPP/SLIP carrying TCP/IP. |
Ethernet Related Technical Specifications |
Industrial Ethernet Protocols Supported |
DNP3, Modbus/TCP, Ethernet/IP (CIP), Rockwell CSP and PCCC, PROFINET and CC-Link. |
Data Rates |
Supports 10Mbps, 100Mbps and 1Gbps Ethernet. |
Network Interface |
Uses any Windows compatible 10/100/1000 Ethernet Network Interface Card (NIC). |
Data Formats Decoded |
16 bit Integers, 32 bit Integers, 32 bit Floating Point, 32 bit Reverse Floating Point, and ASCII. |
Timestamping |
Absolute and relative timestamping; <1 microsecond resolution. |
Other Features |
Write custom decodes using DecoderScript language; Get all future software updates for free. |
Other Ethernet |
Protocols Supported TCP/IP, SLIP, PPP, TCP, UDP, IP, ARP, RARP, DNS, HTTP, ICMP, IGMP, NBDS, NBNS, NBSS, SMTP, IBM NetBIOS, SMB, Novell Netware (IPX, SPX, IPX NetBIOS, NPX ROP, IPX SAP, NCP), and ISO CLNP. |
Industrial Bus Related Technical Specifications |
Industrial Bus Protocols Supported |
CAN 2.0A.
Data Highway Plus.
DH-485.
DeviceNet.
ControlNet. |
Data Capture Interfaces |
CAN 2.0A sniffer requires SST's DeviceNet PCMCIA or PCI card.
Data Highway Plus sniffer requires Rockwell Automation's 1784-U2DHP.
DH-485 requires a RS-485 serial card.
- DeviceNet sniffer requires either
- SST's DeviceNet PCMCIA or PCI card or
Rockwell Automation's 1784-U2DN.
ControlNet sniffer requires Rockwell Automation's 1784-PCC or 1784-U2CN. |
Data Rates |
asas |
Data Formats Decoded |
16 bit Integers, 32 bit Integers, 32 bit Floating Point, 32 bit Reverse Floating Point, and ASCII. |
Timestamping |
Absolute and relative timestamping; <1 microsecond resolution. |
Other Features |
Write custom decodes using DecoderScript language; Get all future software updates for free. |
Minimum System Requirements:
- Windows 7 (32-bit & 64-bit), Windows 8.1 (32-bit & 64-bit), Windows 10 (32-bit & 64-bit)
- Pentium 1GHz processor or higher.
- RAM: 1GB minimum, 2GB recommended.
- 50 MB free Hard Disk space.
- One USB Port.
- Ethernet sniffers require standard Ethernet Network Interface Card (NIC).
- Data Highway Plus sniffer requires Rockwell Automation's 1784-U2DHP.
- DH-485 sniffer requires a 2 port RS-485 serial card.
- CAN2.0A sniffer requires SST's DeviceNet PCI or PCMCIA interfaces.
- DeviceNet sniffer requires one of the following
- SST's DeviceNet PCI or PCMCIA interfaces
- Rockwell Automation's 1784-U2DN.
- ControlNet sniffer requires Rockwell Automation's 1784-PCC card or 1784-U2CN device.
|