250 MHz 60V Common Mode Differential Probe
The Teledyne LeCroy DL02-HCM is a 250 MHz 60V common mode differential probe. A standard set of leads and tips (Browser, 5-inch Y-lead socket, ground lead, 6x single pin, 2x straight pin header) is included.
Ideal Probes for 48V GaN Power Conversion
60 V of common mode and 80 V differential input range with 1 GHz of bandwidth, make the DL-HCM probes ideal for lower voltage GaN power conversion measurements. The 60 V of common mode is well suited for handling any float of the battery and bulk/absorption voltage during charging, while the 80 V differential input range provides margin for any overshoot.
Highest Accuracy
The DL-HCM probes are calibrated for high-precision measurements to within 0.5% at DC and 0.1 dB flatness from DC to 100 MHz. This ensures high accuracy top and base voltage level measurement of pulse-width modulated signals. The Precision Gain Calibration capability furthers measurement precision by improving the gain accuracy and removing small offset drifts from the measurement configuration.
Lowest Noise and Highest Rejection
The Common Mode Rejection Ratio (CMRR) is exceptional to very high frequencies. This provides for the best measurement performance when measuring very fast slew rate (high dV/dt) PWM signals typical of GaN devices and systems. Exceptional CMRR, combined with low probe noise and high offset capability, makes the probes capable of measuring very small control signals floating on high common mode voltages.
Wide Variety of Tips
The 60 V Common Mode Differential Probes provide the perfect combination of high performance and flexibility for connecting to any device under test. An optional accessory kit and high temperature solder-in tip are available (sold separately) for further connectivity options.
DL02-HCM Bandwidth
- 250 MHz (guaranteed, without leads)
- 250 MHz (Browser)
- 250 MHz (2" Y-lead)
- 250 MHz (5" Y-lead)
- 30 MHz (Hi-Temp lead)